X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2FCRAYL1.h;h=9ab30ecbaff2e95f692c5e10261aa1f72534107c;hb=9f07dedeb0f20108252a9af462f398a04709f1a3;hp=527c84650209cd64f8934d27af8892f8860644ac;hpb=bdab39d358e63aa47f400a8a76b8d5f283842df3;p=oweals%2Fu-boot.git

diff --git a/include/configs/CRAYL1.h b/include/configs/CRAYL1.h
index 527c846502..9ab30ecbaf 100644
--- a/include/configs/CRAYL1.h
+++ b/include/configs/CRAYL1.h
@@ -45,6 +45,7 @@
 #define	CONFIG_PHY_ADDR		1	/* PHY address; handling of ENET */
 #define CONFIG_BOARD_EARLY_INIT_F 1	/* early setup for 405gp */
 #define CONFIG_MISC_INIT_R	1	/* so that a misc_init_r() is called */
+#define CONFIG_NET_MULTI
 
 /* set PRAM to keep U-Boot out, mem= to keep linux out, and initrd_hi to
  * keep possible initrd ramdisk decompression out.  This is in k (1024 bytes)
@@ -64,6 +65,7 @@
  #define CONFIG_ETHADDR          00:40:a6:80:14:5
  */
 #define CONFIG_HARD_I2C         1		/* hardware support for i2c */
+#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
 #define CONFIG_SDRAM_BANK0		1
 #define CONFIG_SYS_I2C_SPEED		    400000	/* I2C speed and slave address	*/
 #define CONFIG_SYS_I2C_SLAVE		    0x7F
@@ -74,32 +76,32 @@
 #define	CONFIG_SYS_HZ		             1000	/* decrementer freq: 1 ms ticks	*/
 #define CONFIG_SYS_HUSH_PARSER			1
 #define CONFIG_SYS_PROMPT_HUSH_PS2		"> "
-#define CONFIG_AUTOSCRIPT		1
+#define CONFIG_SOURCE			1
 
 
 /*
  * Command line configuration.
  */
 
+#define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_BDI
-#define CONFIG_CMD_IMI
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_SAVEENV
 #define CONFIG_CMD_CONSOLE
-#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
 #define CONFIG_CMD_ECHO
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IMI
 #define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_NET
 #define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DATE
 #define CONFIG_CMD_RUN
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_AUTOSCRIPT
+#define CONFIG_CMD_SAVEENV
 #define CONFIG_CMD_SETGETDCR
+#define CONFIG_CMD_SOURCE
 
 
 /*