X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2FCATcenter.h;h=1603c9c0bdada1f4a7865f1f57226906681690cd;hb=a55d074dac24dc941f1afb5b4e94b1509bfdda4e;hp=776fce5a9867957be993f6f784ef8c42162e42a6;hpb=05b47540aae996908e48e10a5ff8b69862aadef3;p=oweals%2Fu-boot.git

diff --git a/include/configs/CATcenter.h b/include/configs/CATcenter.h
index 776fce5a98..1603c9c0bd 100644
--- a/include/configs/CATcenter.h
+++ b/include/configs/CATcenter.h
@@ -119,24 +119,36 @@
 
 #define	CONFIG_TIMESTAMP		/* Print image info with timestamp */
 
-#define CONFIG_COMMANDS	      ( CONFIG_CMD_DFL	| \
-				CFG_CMD_DHCP	| \
-				CFG_CMD_ELF	| \
-				CFG_CMD_EEPROM	| \
-				CFG_CMD_I2C	| \
-				CFG_CMD_IRQ	| \
-				CFG_CMD_JFFS2	| \
-				CFG_CMD_MII	| \
-				CFG_CMD_NAND	| \
-				CFG_CMD_NFS	| \
-				CFG_CMD_SNTP	)
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
+
 
 #define CONFIG_MAC_PARTITION
 #define CONFIG_DOS_PARTITION
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
 #define CONFIG_RTC_MC146818		/* DS1685 is MC146818 compatible*/
@@ -155,7 +167,7 @@
 #define CFG_PROMPT_HUSH_PS2	"> "
 #endif
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
 #define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
@@ -193,6 +205,8 @@
  */
 #define CFG_NAND0_BASE 0xFF400000
 #define CFG_NAND1_BASE 0xFF000000
+#define CFG_NAND_BASE_LIST	{ CFG_NAND0_BASE }
+#define NAND_BIG_DELAY_US	25
 
 /* For CATcenter there is only NAND on the module */
 #define CFG_MAX_NAND_DEVICE	1	/* Max number of NAND devices		*/
@@ -218,9 +232,9 @@
 #define CFG_NAND1_RDY (0x80000000 >> 31)  /* our RDY is GPIO31 */
 
 
-#define NAND_DISABLE_CE(nand) do \
+#define MACRO_NAND_DISABLE_CE(nandptr) do \
 { \
-	switch((unsigned long)(((struct nand_chip *)nand)->IO_ADDR)) \
+	switch((unsigned long)nandptr) \
 	{ \
 	    case CFG_NAND0_BASE: \
 		out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND0_CE); \
@@ -231,9 +245,9 @@
 	} \
 } while(0)
 
-#define NAND_ENABLE_CE(nand) do \
+#define MACRO_NAND_ENABLE_CE(nandptr) do \
 { \
-	switch((unsigned long)(((struct nand_chip *)nand)->IO_ADDR)) \
+	switch((unsigned long)nandptr) \
 	{ \
 	    case CFG_NAND0_BASE: \
 		out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND0_CE); \
@@ -244,8 +258,7 @@
 	} \
 } while(0)
 
-
-#define NAND_CTL_CLRALE(nandptr) do \
+#define MACRO_NAND_CTL_CLRALE(nandptr) do \
 { \
 	switch((unsigned long)nandptr) \
 	{ \
@@ -258,7 +271,7 @@
 	} \
 } while(0)
 
-#define NAND_CTL_SETALE(nandptr) do \
+#define MACRO_NAND_CTL_SETALE(nandptr) do \
 { \
 	switch((unsigned long)nandptr) \
 	{ \
@@ -271,7 +284,7 @@
 	} \
 } while(0)
 
-#define NAND_CTL_CLRCLE(nandptr) do \
+#define MACRO_NAND_CTL_CLRCLE(nandptr) do \
 { \
 	switch((unsigned long)nandptr) \
 	{ \
@@ -284,7 +297,7 @@
 	} \
 } while(0)
 
-#define NAND_CTL_SETCLE(nandptr) do { \
+#define MACRO_NAND_CTL_SETCLE(nandptr) do { \
 	switch((unsigned long)nandptr) { \
 	case CFG_NAND0_BASE: \
 		out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND0_CLE); \
@@ -386,6 +399,8 @@
 #define CFG_ENV_ADDR_REDUND	0xFFFFA000
 #define CFG_ENV_SIZE_REDUND	0x2000
 
+#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+
 #define CFG_NVRAM_BASE_ADDR	0xF0000500		/* NVRAM base address	*/
 #define CFG_NVRAM_SIZE		242			/* NVRAM size		*/
 
@@ -409,10 +424,10 @@
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_DCACHE_SIZE		16384	/* For IBM 405 CPUs, older 405 ppc's	*/
+#define CFG_DCACHE_SIZE		16384	/* For AMCC 405 CPUs, older 405 ppc's	*/
 					/* have only 8kB, 16kB is save here	*/
 #define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
 #endif
 
@@ -458,7 +473,7 @@
 #define CONFIG_VGA_AS_SINGLE_DEVICE
 /* This is the base address (on 405EP-side) used to generate I/O accesses on PCI bus */
 #define CFG_ISA_IO 0xE8000000
-/* see also drivers/videomodes.c */
+/* see also drivers/video/videomodes.c */
 #define CFG_DEFAULT_VIDEO_MODE 0x303
 #endif