X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2FBSC9131RDB.h;h=cd8589f0c9be4e90896f407ac112f6f5ce2a6f7f;hb=fd399a183991d4a6bc7376b3fe2cbfa4d9b0ada8;hp=57d4bed89a4fba56d3a1f9dc92664e732f518c18;hpb=7f513e8196589e3b1274132abe3b59e52979e3e5;p=oweals%2Fu-boot.git

diff --git a/include/configs/BSC9131RDB.h b/include/configs/BSC9131RDB.h
index 57d4bed89a..cd8589f0c9 100644
--- a/include/configs/BSC9131RDB.h
+++ b/include/configs/BSC9131RDB.h
@@ -1,7 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2011-2012 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 /*
@@ -16,19 +15,14 @@
 #ifdef CONFIG_SPIFLASH
 #define CONFIG_RAMBOOT_SPIFLASH
 #define CONFIG_SYS_RAMBOOT
-#define CONFIG_SYS_EXTRA_ENV_RELOC
-#define CONFIG_SYS_TEXT_BASE		0x11000000
 #define CONFIG_RESET_VECTOR_ADDRESS	0x110bfffc
 #endif
 
 #ifdef CONFIG_NAND
 #define CONFIG_SPL_INIT_MINIMAL
-#define CONFIG_SPL_NAND_BOOT
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
 
-#define CONFIG_SYS_TEXT_BASE		0x00201000
-#define CONFIG_SPL_TEXT_BASE		0xFFFFE000
 #define CONFIG_SPL_MAX_SIZE		8192
 #define CONFIG_SPL_RELOC_TEXT_BASE	0x00100000
 #define CONFIG_SPL_RELOC_STACK		0x00100000
@@ -36,7 +30,6 @@
 #define CONFIG_SYS_NAND_U_BOOT_DST	(0x00200000 - CONFIG_SPL_MAX_SIZE)
 #define CONFIG_SYS_NAND_U_BOOT_START	0x00200000
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0
-#define CONFIG_SYS_LDSCRIPT	"arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
 #endif
 
 #ifdef CONFIG_SPL_BUILD
@@ -47,7 +40,6 @@
 
 /* High Level Configuration Options */
 
-#define CONFIG_TSEC_ENET
 #define CONFIG_ENV_OVERWRITE
 
 #define CONFIG_DDR_CLK_FREQ	66666666 /* DDRCLK on 9131 RDB */
@@ -206,7 +198,6 @@ extern unsigned long get_sdram_size(void);
 #define CONFIG_SYS_MALLOC_LEN		(1024 * 1024)	/* Reserved for malloc*/
 
 /* Serial Port */
-#define CONFIG_CONS_INDEX	1
 #undef	CONFIG_SERIAL_SOFTWARE_FIFO
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
@@ -232,14 +223,9 @@ extern unsigned long get_sdram_size(void);
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 
 /* eSPI - Enhanced SPI */
-#ifdef CONFIG_FSL_ESPI
-#define CONFIG_SF_DEFAULT_SPEED		10000000
-#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
-#endif
 
 #if defined(CONFIG_TSEC_ENET)
 
-#define CONFIG_MII			/* MII PHY management */
 #define CONFIG_MII_DEFAULT_TSEC	1	/* Allow unregistered phys */
 #define CONFIG_TSEC1	1
 #define CONFIG_TSEC1_NAME	"eTSEC1"
@@ -264,37 +250,16 @@ extern unsigned long get_sdram_size(void);
  * Environment
  */
 #if defined(CONFIG_RAMBOOT_SPIFLASH)
-#define CONFIG_ENV_SPI_BUS	0
-#define CONFIG_ENV_SPI_CS	0
-#define CONFIG_ENV_SPI_MAX_HZ	10000000
-#define CONFIG_ENV_SPI_MODE	0
-#define CONFIG_ENV_OFFSET	0x100000	/* 1MB */
-#define CONFIG_ENV_SECT_SIZE	0x10000
-#define CONFIG_ENV_SIZE		0x2000
 #elif defined(CONFIG_NAND)
-#define CONFIG_SYS_EXTRA_ENV_RELOC
-#define CONFIG_ENV_SIZE		CONFIG_SYS_NAND_BLOCK_SIZE
-#define CONFIG_ENV_OFFSET	((768 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE)
 #define CONFIG_ENV_RANGE	(3 * CONFIG_ENV_SIZE)
-#elif defined(CONFIG_SYS_RAMBOOT)
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - 0x1000)
-#define CONFIG_ENV_SIZE		0x2000
 #endif
 
 #define CONFIG_LOADS_ECHO		/* echo on for serial download */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE		/* allow baudrate change */
 
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_REGINFO
-
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP			/* undef to save memory	*/
-#define CONFIG_CMDLINE_EDITING			/* Command-line editing */
-#define CONFIG_AUTO_COMPLETE			/* add autocompletion support */
 #define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
 
 #if defined(CONFIG_CMD_KGDB)
@@ -302,9 +267,6 @@ extern unsigned long get_sdram_size(void);
 #else
 #define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size */
 #endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-						/* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 
 /*
@@ -328,11 +290,6 @@ extern unsigned long get_sdram_size(void);
 /*
  * Dynamic MTD Partition support with mtdparts
  */
-#define CONFIG_MTD_DEVICE
-#define CONFIG_MTD_PARTITIONS
-#define MTDIDS_DEFAULT "nand0=ff800000.flash,"
-#define MTDPARTS_DEFAULT "mtdparts=ff800000.flash:1m(uboot)," \
-			"8m(kernel),512k(dtb),-(fs)"
 
 /*
  * Environment Configuration
@@ -342,7 +299,7 @@ extern unsigned long get_sdram_size(void);
 #define CONFIG_HAS_ETH0
 #endif
 
-#define CONFIG_HOSTNAME		BSC9131rdb
+#define CONFIG_HOSTNAME		"BSC9131rdb"
 #define CONFIG_ROOTPATH		"/opt/nfsroot"
 #define CONFIG_BOOTFILE		"uImage"
 #define CONFIG_UBOOTPATH	"u-boot.bin" /* U-Boot image on TFTP server */