X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fconfigs%2FAdderUSB.h;h=e4c1c9ca3e6fc6dc26ff30f3428b24ecc3a93bdb;hb=18a056a18f6294a88c34105efcabf4c0638a946b;hp=2112e56e09c4131f933abef44051ccd4dfafed70;hpb=16c8d5e76ae0f78f39a60608574adfe0feb9cc70;p=oweals%2Fu-boot.git

diff --git a/include/configs/AdderUSB.h b/include/configs/AdderUSB.h
index 2112e56e09..e4c1c9ca3e 100644
--- a/include/configs/AdderUSB.h
+++ b/include/configs/AdderUSB.h
@@ -3,7 +3,7 @@
  * Bryan O'Donoghue <bodonoghue@codehermit.ie>
  *
  * Provides support for USB console on the Analogue & Micro Adder87x
- * 
+ *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
@@ -31,19 +31,19 @@
 
 #define CONFIG_USB_DEVICE		/* Include UDC driver */
 #define CONFIG_USB_TTY			/* Bind the TTY driver to UDC */
-#define CFG_USB_EXTC_CLK 0x02		/* Oscillator on EXTC_CLK 2 */
-#define CFG_USB_BRG_CLK	0x04		/* or use Baud rate generator 0x04 */
-#define CFG_CONSOLE_IS_IN_ENV		/* Console is in env */
+#define CONFIG_SYS_USB_EXTC_CLK 0x02		/* Oscillator on EXTC_CLK 2 */
+#define CONFIG_SYS_USB_BRG_CLK	0x04		/* or use Baud rate generator 0x04 */
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV		/* Console is in env */
 
 /* If you have a USB-IF assigned VendorID then you may wish to define
  * your own vendor specific values either in BoardName.h or directly in
- * usbd_vendor_info.h 
+ * usbd_vendor_info.h
  */
 
-/* 
+/*
 #define CONFIG_USBD_MANUFACTURER	"CodeHermit.ie"
 #define CONFIG_USBD_PRODUCT_NAME	"Das U-Boot"
-#define CONFIG_USBD_VENDORID		0xFFFF 
+#define CONFIG_USBD_VENDORID		0xFFFF
 #define CONFIG_USBD_PRODUCTID_GSERIAL	0xFFFF
 #define CONFIG_USBD_PRODUCTID_CDCACM	0xFFFE
 */