X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fcommon.h;h=ad8c18cd6afb2de920845aa27e89f8394513a931;hb=1fab98fb90b0350210ac6938cb61647c66dcf0f7;hp=68b24d0778d4c2f64b2d608c14293387d130e5d3;hpb=850f788709cef8f7d53d571aec3bfb73b14c5531;p=oweals%2Fu-boot.git diff --git a/include/common.h b/include/common.h index 68b24d0778..0fe9439a93 100644 --- a/include/common.h +++ b/include/common.h @@ -15,67 +15,24 @@ typedef volatile unsigned long vu_long; typedef volatile unsigned short vu_short; typedef volatile unsigned char vu_char; +/* Allow sharing constants with type modifiers between C and assembly. */ +#define _AC(X, Y) (X##Y) + #include +#include +#include #include #include +#include +#include #include +#include #include #include #include #include +#include #include -#if defined(CONFIG_PCI) && defined(CONFIG_4xx) -#include -#endif -#if defined(CONFIG_8xx) -#include -#if defined(CONFIG_MPC859) || defined(CONFIG_MPC859T) || \ - defined(CONFIG_MPC866) || \ - defined(CONFIG_MPC866P) -# define CONFIG_MPC866_FAMILY 1 -#elif defined(CONFIG_MPC885) -# define CONFIG_MPC885_FAMILY 1 -#endif -#if defined(CONFIG_MPC860) \ - || defined(CONFIG_MPC860T) \ - || defined(CONFIG_MPC866_FAMILY) \ - || defined(CONFIG_MPC885_FAMILY) -# define CONFIG_MPC86x 1 -#endif -#elif defined(CONFIG_5xx) -#include -#elif defined(CONFIG_MPC5xxx) -#include -#elif defined(CONFIG_MPC512X) -#include -#elif defined(CONFIG_MPC8260) -#if defined(CONFIG_MPC8247) \ - || defined(CONFIG_MPC8272) -#define CONFIG_MPC8272_FAMILY 1 -#endif -#include -#endif -#ifdef CONFIG_MPC86xx -#include -#include -#endif -#ifdef CONFIG_MPC85xx -#include -#include -#endif -#ifdef CONFIG_MPC83xx -#include -#include -#endif -#ifdef CONFIG_4xx -#include -#endif -#ifdef CONFIG_BLACKFIN -#include -#endif -#ifdef CONFIG_SOC_DA8XX -#include -#endif #include #include @@ -88,88 +45,13 @@ typedef volatile unsigned char vu_char; #define CONFIG_SYS_SUPPORT_64BIT_DATA #endif -#ifdef DEBUG -#define _DEBUG 1 -#else -#define _DEBUG 0 -#endif - -#ifndef pr_fmt -#define pr_fmt(fmt) fmt -#endif - -/* - * Output a debug text when condition "cond" is met. The "cond" should be - * computed by a preprocessor in the best case, allowing for the best - * optimization. - */ -#define debug_cond(cond, fmt, args...) \ - do { \ - if (cond) \ - printf(pr_fmt(fmt), ##args); \ - } while (0) - -#define debug(fmt, args...) \ - debug_cond(_DEBUG, fmt, ##args) - -/* - * An assertion is run-time check done in debug mode only. If DEBUG is not - * defined then it is skipped. If DEBUG is defined and the assertion fails, - * then it calls panic*( which may or may not reset/halt U-Boot (see - * CONFIG_PANIC_HANG), It is hoped that all failing assertions are found - * before release, and after release it is hoped that they don't matter. But - * in any case these failing assertions cannot be fixed with a reset (which - * may just do the same assertion again). - */ -void __assert_fail(const char *assertion, const char *file, unsigned line, - const char *function); -#define assert(x) \ - ({ if (!(x) && _DEBUG) \ - __assert_fail(#x, __FILE__, __LINE__, __func__); }) - -#define error(fmt, args...) do { \ - printf("ERROR: " pr_fmt(fmt) "\nat %s:%d/%s()\n", \ - ##args, __FILE__, __LINE__, __func__); \ -} while (0) - -#ifndef BUG -#define BUG() do { \ - printf("BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __FUNCTION__); \ - panic("BUG!"); \ -} while (0) -#define BUG_ON(condition) do { if (unlikely((condition)!=0)) BUG(); } while(0) -#endif /* BUG */ - -/* Force a compilation error if condition is true */ -#define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)])) +#include typedef void (interrupt_handler_t)(void *); #include /* boot information for Linux kernel */ #include /* global data used for startup functions */ -/* - * enable common handling for all TQM8xxL/M boards: - * - CONFIG_TQM8xxM will be defined for all TQM8xxM boards - * - CONFIG_TQM8xxL will be defined for all TQM8xxL _and_ TQM8xxM boards - * and for the TQM885D board - */ -#if defined(CONFIG_TQM823M) || defined(CONFIG_TQM850M) || \ - defined(CONFIG_TQM855M) || defined(CONFIG_TQM860M) || \ - defined(CONFIG_TQM862M) || defined(CONFIG_TQM866M) -# ifndef CONFIG_TQM8xxM -# define CONFIG_TQM8xxM -# endif -#endif -#if defined(CONFIG_TQM823L) || defined(CONFIG_TQM850L) || \ - defined(CONFIG_TQM855L) || defined(CONFIG_TQM860L) || \ - defined(CONFIG_TQM862L) || defined(CONFIG_TQM8xxM) || \ - defined(CONFIG_TQM885D) -# ifndef CONFIG_TQM8xxL -# define CONFIG_TQM8xxL -# endif -#endif - #if defined(CONFIG_ENV_IS_EMBEDDED) #define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN #elif ( ((CONFIG_ENV_ADDR+CONFIG_ENV_SIZE) < CONFIG_SYS_MONITOR_BASE) || \ @@ -185,14 +67,28 @@ typedef void (interrupt_handler_t)(void *); */ int dram_init(void); +/** + * dram_init_banksize() - Set up DRAM bank sizes + * + * This can be implemented by boards to set up the DRAM bank information in + * gd->bd->bi_dram(). It is called just before relocation, after dram_init() + * is called. + * + * If this is not provided, a default implementation will try to set up a + * single bank. It will do this if CONFIG_NR_DRAM_BANKS and + * CONFIG_SYS_SDRAM_BASE are set. The bank will have a start address of + * CONFIG_SYS_SDRAM_BASE and the size will be determined by a call to + * get_effective_memsize(). + * + * @return 0 if OK, -ve on error + */ +int dram_init_banksize(void); + void hang (void) __attribute__ ((noreturn)); int timer_init(void); int cpu_init(void); -/* */ -phys_size_t initdram (int); - #include /* common/main.c */ @@ -212,39 +108,32 @@ int run_command_repeatable(const char *cmd, int flag); * @return 0 on success, or != 0 on error. */ int run_command_list(const char *cmd, int len, int flag); -extern char console_buffer[]; /* arch/$(ARCH)/lib/board.c */ void board_init_f(ulong); void board_init_r(gd_t *, ulong) __attribute__ ((noreturn)); /** - * board_init_f_mem() - Allocate global data and set stack position + * ulong board_init_f_alloc_reserve - allocate reserved area * * This function is called by each architecture very early in the start-up - * code to set up the environment for board_init_f(). It allocates space for - * global_data (see include/asm-generic/global_data.h) and places the stack - * below this. - * - * This function requires a stack[1] Normally this is at @top. The function - * starts allocating space from 64 bytes below @top. First it creates space - * for global_data. Then it calls arch_setup_gd() which sets gd to point to - * the global_data space and can reserve additional bytes of space if - * required). Finally it allocates early malloc() memory - * (CONFIG_SYS_MALLOC_F_LEN). The new top of the stack is just below this, - * and it returned by this function. - * - * [1] Strictly speaking it would be possible to implement this function - * in C on many archs such that it does not require a stack. However this - * does not seem hugely important as only 64 byte are wasted. The 64 bytes - * are used to handle the calling standard which generally requires pushing - * addresses or registers onto the stack. We should be able to get away with - * less if this becomes important. - * - * @top: Top of available memory, also normally the top of the stack - * @return: New stack location + * code to allow the C runtime to reserve space on the stack for writable + * 'globals' such as GD and the malloc arena. + * + * @top: top of the reserve area, growing down. + * @return: bottom of reserved area + */ +ulong board_init_f_alloc_reserve(ulong top); + +/** + * board_init_f_init_reserve - initialize the reserved area(s) + * + * This function is called once the C runtime has allocated the reserved + * area on the stack. It must initialize the GD at the base of that area. + * + * @base: top from which reservation was done */ -ulong board_init_f_mem(ulong top); +void board_init_f_init_reserve(ulong base); /** * arch_setup_gd() - Set up the global_data pointer @@ -268,19 +157,29 @@ int last_stage_init(void); extern ulong monitor_flash_len; int mac_read_from_eeprom(void); extern u8 __dtb_dt_begin[]; /* embedded device tree blob */ +extern u8 __dtb_dt_spl_begin[]; /* embedded device tree blob for SPL/TPL */ int set_cpu_clk_info(void); int mdm_init(void); -#if defined(CONFIG_DISPLAY_CPUINFO) int print_cpuinfo(void); -#else -static inline int print_cpuinfo(void) -{ - return 0; -} -#endif int update_flash_size(int flash_size); int arch_early_init_r(void); +/* + * setup_board_extra() - Fill in extra details in the bd_t structure + * + * @return 0 if OK, -ve on error + */ +int setup_board_extra(void); + +/** + * arch_fsp_init() - perform firmware support package init + * + * Where U-Boot relies on binary blobs to handle part of the system init, this + * function can be used to set up the blobs. This is used on some Intel + * platforms. + */ +int arch_fsp_init(void); + /** * arch_cpu_init_dm() - init CPU after driver model is available * @@ -329,6 +228,7 @@ void board_show_dram(phys_size_t size); */ int arch_fixup_fdt(void *blob); +int reserve_mmu(void); /* common/flash.c */ void flash_perror (int); @@ -339,9 +239,6 @@ extern ulong load_addr; /* Default Load Address */ extern ulong save_addr; /* Default Save Address */ extern ulong save_size; /* Default Save Size */ -/* common/cmd_doc.c */ -void doc_probe(unsigned long physadr); - /* common/cmd_net.c */ int do_tftpb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); @@ -356,16 +253,45 @@ int env_init (void); void env_relocate (void); int envmatch (uchar *, int); -/* Avoid unfortunate conflict with libc's getenv() */ -#ifdef CONFIG_SANDBOX -#define getenv uboot_getenv -#endif -char *getenv (const char *); -int getenv_f (const char *name, char *buf, unsigned len); -ulong getenv_ulong(const char *name, int base, ulong default_val); +/** + * env_get() - Look up the value of an environment variable + * + * In U-Boot proper this can be called before relocation (which is when the + * environment is loaded from storage, i.e. GD_FLG_ENV_READY is 0). In that + * case this function calls env_get_f(). + * + * @varname: Variable to look up + * @return value of variable, or NULL if not found + */ +char *env_get(const char *varname); + +/** + * env_get_f() - Look up the value of an environment variable (early) + * + * This function is called from env_get() if the environment has not been + * loaded yet (GD_FLG_ENV_READY flag is 0). Some environment locations will + * support reading the value (slowly) and some will not. + * + * @varname: Variable to look up + * @return value of variable, or NULL if not found + */ +int env_get_f(const char *name, char *buf, unsigned len); /** - * getenv_hex() - Return an environment variable as a hex value + * env_get_ulong() - Return an environment variable as an integer value + * + * Most U-Boot environment variables store hex values. For those which store + * (e.g.) base-10 integers, this function can be used to read the value. + * + * @name: Variable to look up + * @base: Base to use (e.g. 10 for base 10, 2 for binary) + * @default_val: Default value to return if no value is found + * @return the value found, or @default_val if none + */ +ulong env_get_ulong(const char *name, int base, ulong default_val); + +/** + * env_get_hex() - Return an environment variable as a hex value * * Decode an environment as a hex number (it may or may not have a 0x * prefix). If the environment variable cannot be found, or does not start @@ -374,52 +300,56 @@ ulong getenv_ulong(const char *name, int base, ulong default_val); * @varname: Variable to decode * @default_val: Value to return on error */ -ulong getenv_hex(const char *varname, ulong default_val); +ulong env_get_hex(const char *varname, ulong default_val); /* * Read an environment variable as a boolean * Return -1 if variable does not exist (default to true) */ -int getenv_yesno(const char *var); -int saveenv (void); -int setenv (const char *, const char *); -int setenv_ulong(const char *varname, ulong value); -int setenv_hex(const char *varname, ulong value); +int env_get_yesno(const char *var); + +/** + * env_set() - set an environment variable + * + * This sets or deletes the value of an environment variable. For setting the + * value the variable is created if it does not already exist. + * + * @varname: Variable to adjust + * @value: Value to set for the variable, or NULL or "" to delete the variable + * @return 0 if OK, 1 on error + */ +int env_set(const char *varname, const char *value); + +/** + * env_set_ulong() - set an environment variable to an integer + * + * @varname: Variable to adjust + * @value: Value to set for the variable (will be converted to a string) + * @return 0 if OK, 1 on error + */ +int env_set_ulong(const char *varname, ulong value); + /** - * setenv_addr - Set an environment variable to an address in hex + * env_set_hex() - set an environment variable to a hex value + * + * @varname: Variable to adjust + * @value: Value to set for the variable (will be converted to a hex string) + * @return 0 if OK, 1 on error + */ +int env_set_hex(const char *varname, ulong value); + +/** + * env_set_addr - Set an environment variable to an address in hex * * @varname: Environment variable to set * @addr: Value to set it to * @return 0 if ok, 1 on error */ -static inline int setenv_addr(const char *varname, const void *addr) +static inline int env_set_addr(const char *varname, const void *addr) { - return setenv_hex(varname, (ulong)addr); + return env_set_hex(varname, (ulong)addr); } -#ifdef CONFIG_ARM -# include -# include -# include /* ARM version to be fixed! */ -#endif /* CONFIG_ARM */ -#ifdef CONFIG_X86 /* x86 version to be fixed! */ -# include -#endif /* CONFIG_X86 */ -#ifdef CONFIG_SANDBOX -# include /* TODO(sjg) what needs to be fixed? */ -#endif -#ifdef CONFIG_NDS32 -# include -# include -# include -#endif /* CONFIG_NDS32 */ -#ifdef CONFIG_MIPS -# include -#endif /* CONFIG_MIPS */ -#ifdef CONFIG_ARC -# include -#endif /* CONFIG_ARC */ - #ifdef CONFIG_AUTO_COMPLETE int env_complete(char *var, int maxv, char *cmdv[], int maxsz, char *buf); #endif @@ -427,29 +357,16 @@ int get_env_id (void); void pci_init (void); void pci_init_board(void); -void pciinfo (int, int); -#if defined(CONFIG_PCI) && defined(CONFIG_4xx) - int pci_pre_init (struct pci_controller *); - int is_pci_host (struct pci_controller *); -#endif - -#if defined(CONFIG_PCI) && (defined(CONFIG_440) || defined(CONFIG_405EX)) -# if defined(CONFIG_SYS_PCI_TARGET_INIT) - void pci_target_init (struct pci_controller *); -# endif -# if defined(CONFIG_SYS_PCI_MASTER_INIT) - void pci_master_init (struct pci_controller *); -# endif -#if defined(CONFIG_440SPE) || \ - defined(CONFIG_460EX) || defined(CONFIG_460GT) || \ - defined(CONFIG_405EX) - void pcie_setup_hoses(int busno); -#endif +#if defined(CONFIG_DTB_RESELECT) +int embedded_dtb_select(void); #endif int misc_init_f (void); int misc_init_r (void); +#if defined(CONFIG_VID) +int init_func_vid(void); +#endif /* common/exports.c */ void jumptable_init(void); @@ -457,9 +374,6 @@ void jumptable_init(void); /* common/kallsysm.c */ const char *symbol_lookup(unsigned long addr, unsigned long *caddr); -/* api/api.c */ -void api_init (void); - /* common/memsize.c */ long get_ram_size (long *, long); phys_size_t get_effective_memsize(void); @@ -469,12 +383,19 @@ void reset_phy (void); void fdc_hw_init (void); /* $(BOARD)/eeprom.c */ -void eeprom_init (void); -#ifndef CONFIG_SPI -int eeprom_probe (unsigned dev_addr, unsigned offset); -#endif +#ifdef CONFIG_CMD_EEPROM +void eeprom_init (int bus); int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt); int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt); +#else +/* + * Some EEPROM code is depecated because it used the legacy I2C interface. Add + * some macros here so we don't have to touch every one of those uses + */ +#define eeprom_init(bus) +#define eeprom_read(dev_addr, offset, buffer, cnt) ((void)-ENOSYS) +#define eeprom_write(dev_addr, offset, buffer, cnt) ((void)-ENOSYS) +#endif /* * Set this up regardless of board @@ -497,6 +418,7 @@ extern ssize_t spi_write (uchar *, int, uchar *, int); /* $(BOARD)/$(BOARD).c */ int board_early_init_f (void); +int board_fix_fdt (void *rw_fdt_blob); /* manipulate the U-Boot fdt before its relocation */ int board_late_init (void); int board_postclk_init (void); /* after clocks/timebase, before env/serial */ int board_early_init_r (void); @@ -507,21 +429,6 @@ int testdram(void); #endif /* CONFIG_SYS_DRAM_TEST */ /* $(CPU)/start.S */ -#if defined(CONFIG_5xx) || \ - defined(CONFIG_8xx) -uint get_immr (uint); -#endif -#if defined(CONFIG_MPC5xxx) -uint get_svr (void); -#endif -uint get_pvr (void); -uint get_svr (void); -uint rd_ic_cst (void); -void wr_ic_cst (uint); -void wr_ic_adr (uint); -uint rd_dc_cst (void); -void wr_dc_cst (uint); -void wr_dc_adr (uint); int icache_status (void); void icache_enable (void); void icache_disable(void); @@ -536,46 +443,6 @@ void relocate_code(ulong, gd_t *, ulong) __attribute__ ((noreturn)); #endif ulong get_endaddr (void); void trap_init (ulong); -#if defined (CONFIG_4xx) || \ - defined (CONFIG_MPC5xxx) || \ - defined (CONFIG_MPC85xx) || \ - defined (CONFIG_MPC86xx) || \ - defined (CONFIG_MPC83xx) -unsigned char in8(unsigned int); -void out8(unsigned int, unsigned char); -unsigned short in16(unsigned int); -unsigned short in16r(unsigned int); -void out16(unsigned int, unsigned short value); -void out16r(unsigned int, unsigned short value); -unsigned long in32(unsigned int); -unsigned long in32r(unsigned int); -void out32(unsigned int, unsigned long value); -void out32r(unsigned int, unsigned long value); -void ppcDcbf(unsigned long value); -void ppcDcbi(unsigned long value); -void ppcSync(void); -void ppcDcbz(unsigned long value); -#endif -#if defined (CONFIG_MICROBLAZE) -unsigned short in16(unsigned int); -void out16(unsigned int, unsigned short value); -#endif - -#if defined (CONFIG_MPC83xx) -void ppcDWload(unsigned int *addr, unsigned int *ret); -void ppcDWstore(unsigned int *addr, unsigned int *value); -void disable_addr_trans(void); -void enable_addr_trans(void); -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) -void ddr_enable_ecc(unsigned int dram_size); -#endif -#endif - -/* - * Return the current value of a monotonically increasing microsecond timer. - * Granularity may be larger than 1us if hardware does not support this. - */ -ulong timer_get_us(void); /* $(CPU)/cpu.c */ static inline int cpumask_next(int cpu, unsigned int mask) @@ -596,7 +463,19 @@ int cpu_num_dspcores(void); u32 cpu_mask (void); u32 cpu_dsp_mask(void); int is_core_valid (unsigned int); -int probecpu (void); + +/** + * arch_cpu_init() - basic cpu-dependent setup for an architecture + * + * This is called after early malloc is available. It should handle any + * CPU- or SoC- specific init needed to continue the init sequence. See + * board_f.c for where it is called. If this is not provided, a default + * version (which does nothing) will be used. + */ +int arch_cpu_init(void); + +void s_init(void); + int checkcpu (void); int checkicache (void); int checkdcache (void); @@ -604,12 +483,8 @@ void upmconfig (unsigned int, unsigned int *, unsigned int); ulong get_tbclk (void); void reset_misc (void); void reset_cpu (ulong addr); -#if defined (CONFIG_OF_LIBFDT) && defined (CONFIG_OF_BOARD_SETUP) void ft_cpu_setup(void *blob, bd_t *bd); -#ifdef CONFIG_PCI void ft_pci_setup(void *blob, bd_t *bd); -#endif -#endif void smp_set_core_boot_addr(unsigned long addr, int corenr); void smp_kick_all_cpus(void); @@ -623,96 +498,12 @@ void serial_puts (const char *); int serial_getc (void); int serial_tstc (void); -/* These versions take a stdio_dev pointer */ -struct stdio_dev; -int serial_stub_getc(struct stdio_dev *sdev); -int serial_stub_tstc(struct stdio_dev *sdev); - /* $(CPU)/speed.c */ int get_clocks (void); -int get_clocks_866 (void); -int sdram_adjust_866 (void); -int adjust_sdram_tbs_8xx (void); -#if defined(CONFIG_MPC8260) -int prt_8260_clks (void); -#elif defined(CONFIG_MPC5xxx) -int prt_mpc5xxx_clks (void); -#endif -#ifdef CONFIG_4xx -ulong get_OPB_freq (void); -ulong get_PCI_freq (void); -#endif -#if defined(CONFIG_S3C24X0) || \ - defined(CONFIG_LH7A40X) || \ - defined(CONFIG_EP93XX) -ulong get_FCLK (void); -ulong get_HCLK (void); -ulong get_PCLK (void); -ulong get_UCLK (void); -#endif -#if defined(CONFIG_LH7A40X) -ulong get_PLLCLK (void); -#endif -#if defined(CONFIG_IMX) -ulong get_systemPLLCLK(void); -ulong get_FCLK(void); -ulong get_HCLK(void); -ulong get_BCLK(void); -ulong get_PERCLK1(void); -ulong get_PERCLK2(void); -ulong get_PERCLK3(void); -#endif ulong get_bus_freq (ulong); int get_serial_clock(void); -#if defined(CONFIG_MPC85xx) -typedef MPC85xx_SYS_INFO sys_info_t; -void get_sys_info ( sys_info_t * ); -# if defined(CONFIG_OF_LIBFDT) - void ft_fixup_cpu(void *, u64); - void ft_fixup_num_cores(void *); -# endif -#endif -#if defined(CONFIG_MPC86xx) -typedef MPC86xx_SYS_INFO sys_info_t; -void get_sys_info ( sys_info_t * ); -static inline ulong get_ddr_freq(ulong dummy) -{ - return get_bus_freq(dummy); -} -#else -ulong get_ddr_freq(ulong); -#endif - -#if defined(CONFIG_4xx) -# if defined(CONFIG_440) -# if defined(CONFIG_440SPE) - unsigned long determine_sysper(void); - unsigned long determine_pci_clock_per(void); -# endif -# endif -typedef PPC4xx_SYS_INFO sys_info_t; -int ppc440spe_revB(void); -void get_sys_info ( sys_info_t * ); -#endif - -/* $(CPU)/cpu_init.c */ -#if defined(CONFIG_8xx) || defined(CONFIG_MPC8260) -void cpu_init_f (volatile immap_t *immr); -#endif -#if defined(CONFIG_4xx) || defined(CONFIG_MCF52x2) || defined(CONFIG_MPC86xx) -void cpu_init_f (void); -#endif -#ifdef CONFIG_MPC85xx -ulong cpu_init_f(void); -#endif - int cpu_init_r (void); -#if defined(CONFIG_MPC8260) -int prt_8260_rsr (void); -#elif defined(CONFIG_MPC83xx) -int prt_83xx_rsr (void); -#endif /* $(CPU)/interrupts.c */ int interrupt_init (void); @@ -721,7 +512,6 @@ void external_interrupt (struct pt_regs *); void irq_install_handler(int, interrupt_handler_t *, void *); void irq_free_handler (int); void reset_timer (void); -ulong get_timer (ulong base); /* Return value of monotonic microsecond timer */ unsigned long timer_get_us(void); @@ -777,12 +567,11 @@ uint64_t get_ticks(void); void wait_ticks (unsigned long); /* arch/$(ARCH)/lib/time.c */ -void __udelay (unsigned long); ulong usec2ticks (unsigned long usec); ulong ticks2usec (unsigned long ticks); -int init_timebase (void); /* lib/gunzip.c */ +int gzip_parse_header(const unsigned char *src, unsigned long len); int gunzip(void *, int, unsigned char *, unsigned long *); int zunzip(void *dst, int dstlen, unsigned char *src, unsigned long *lenp, int stoponerr, int offset); @@ -821,20 +610,19 @@ void gzwrite_progress_finish(int retcode, * for files under 4GiB */ int gzwrite(unsigned char *src, int len, - struct block_dev_desc *dev, + struct blk_desc *dev, unsigned long szwritebuf, u64 startoffs, u64 szexpected); +/* lib/lz4_wrapper.c */ +int ulz4fn(const void *src, size_t srcn, void *dst, size_t *dstn); + /* lib/qsort.c */ void qsort(void *base, size_t nmemb, size_t size, int(*compar)(const void *, const void *)); int strcmp_compar(const void *, const void *); -/* lib/time.c */ -void udelay (unsigned long); -void mdelay(unsigned long); - /* lib/uuid.c */ #include @@ -853,58 +641,12 @@ void srand(unsigned int seed); unsigned int rand(void); unsigned int rand_r(unsigned int *seedp); -/* common/console.c */ -int console_init_f(void); /* Before relocation; uses the serial stuff */ -int console_init_r(void); /* After relocation; uses the console stuff */ -int console_assign(int file, const char *devname); /* Assign the console */ -int ctrlc (void); -int had_ctrlc (void); /* have we had a Control-C since last clear? */ -void clear_ctrlc (void); /* clear the Control-C condition */ -int disable_ctrlc (int); /* 1 to disable, 0 to enable Control-C detect */ -int confirm_yesno(void); /* 1 if input is "y", "Y", "yes" or "YES" */ /* * STDIO based functions (can always be used) */ /* serial stuff */ int serial_printf (const char *fmt, ...) __attribute__ ((format (__printf__, 1, 2))); -/* stdin */ -int getc(void); -int tstc(void); - -/* stdout */ -#if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_SERIAL_SUPPORT) -#define putc(...) do { } while (0) -#define puts(...) do { } while (0) -#define printf(...) do { } while (0) -#define vprintf(...) do { } while (0) -#else -void putc(const char c); -void puts(const char *s); -int printf(const char *fmt, ...) - __attribute__ ((format (__printf__, 1, 2))); -int vprintf(const char *fmt, va_list args); -#endif - -/* stderr */ -#define eputc(c) fputc(stderr, c) -#define eputs(s) fputs(stderr, s) -#define eprintf(fmt,args...) fprintf(stderr,fmt ,##args) - -/* - * FILE based functions (can only be used AFTER relocation!) - */ -#define stdin 0 -#define stdout 1 -#define stderr 2 -#define MAX_FILES 3 - -int fprintf(int file, const char *fmt, ...) - __attribute__ ((format (__printf__, 2, 3))); -void fputs(int file, const char *s); -void fputc(int file, const char c); -int ftstc(int file); -int fgetc(int file); /* lib/gzip.c */ int gzip(void *dst, unsigned long *lenp, @@ -915,21 +657,14 @@ int zzip(void *dst, unsigned long *lenp, unsigned char *src, /* lib/net_utils.c */ #include -static inline struct in_addr getenv_ip(char *var) +static inline struct in_addr env_get_ip(char *var) { - return string_to_ip(getenv(var)); + return string_to_ip(env_get(var)); } -/* - * CONSOLE multiplexing. - */ -#ifdef CONFIG_CONSOLE_MUX -#include -#endif - int pcmcia_init (void); -#ifdef CONFIG_STATUS_LED +#ifdef CONFIG_LED_STATUS # include #endif @@ -947,18 +682,18 @@ int cpu_disable(int nr); int cpu_release(int nr, int argc, char * const argv[]); #endif -#endif /* __ASSEMBLY__ */ +#else /* __ASSEMBLY__ */ -#ifdef CONFIG_PPC -/* - * Has to be included outside of the #ifndef __ASSEMBLY__ section. - * Otherwise might lead to compilation errors in assembler files. - */ -#include -#endif +/* Drop a C type modifier (like in 3UL) for constants used in assembly. */ +#define _AC(X, Y) X + +#endif /* __ASSEMBLY__ */ /* Put only stuff here that the assembler can digest */ +/* Declare an unsigned long constant digestable both by C and an assembler. */ +#define UL(x) _AC(x, UL) + #ifdef CONFIG_POST #define CONFIG_HAS_POST #ifndef CONFIG_POST_ALT_LIST