X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fcommon.h;h=52c02185f40e0ead25d761ed1c685a56de33f74a;hb=7b5b9343139f934f1ce876e9466c065f20c8265c;hp=8b9f859c07f8bc4bc5ffde2b07e54c0a321742e8;hpb=758694ff076255115b6cd936b13108db3773ee57;p=oweals%2Fu-boot.git diff --git a/include/common.h b/include/common.h index 8b9f859c07..52c02185f4 100644 --- a/include/common.h +++ b/include/common.h @@ -1,5 +1,11 @@ /* SPDX-License-Identifier: GPL-2.0+ */ /* + * Common header file for U-Boot + * + * This file still includes quite a bit of stuff that should be in separate + * headers. Please think before adding more things. + * Patches to remove things are welcome. + * * (C) Copyright 2000-2009 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. */ @@ -9,14 +15,10 @@ #ifndef __ASSEMBLY__ /* put C only stuff in this section */ -typedef unsigned char uchar; typedef volatile unsigned long vu_long; typedef volatile unsigned short vu_short; typedef volatile unsigned char vu_char; -/* Allow sharing constants with type modifiers between C and assembly. */ -#define _AC(X, Y) (X##Y) - #include #include #include @@ -43,21 +45,9 @@ typedef volatile unsigned char vu_char; #include -typedef void (interrupt_handler_t)(void *); - #include /* boot information for Linux kernel */ #include /* global data used for startup functions */ -#if defined(CONFIG_ENV_IS_EMBEDDED) -#define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN -#elif ( ((CONFIG_ENV_ADDR+CONFIG_ENV_SIZE) < CONFIG_SYS_MONITOR_BASE) || \ - (CONFIG_ENV_ADDR >= (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)) ) || \ - defined(CONFIG_ENV_IS_IN_NVRAM) -#define TOTAL_MALLOC_LEN (CONFIG_SYS_MALLOC_LEN + CONFIG_ENV_SIZE) -#else -#define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN -#endif - /* startup functions, used in: * common/board_f.c * common/init/board_init.c @@ -71,27 +61,10 @@ typedef void (interrupt_handler_t)(void *); */ void hang (void) __attribute__ ((noreturn)); -int cpu_init(void); - #include /* common/main.c */ void main_loop (void); -int run_command(const char *cmd, int flag); -int run_command_repeatable(const char *cmd, int flag); - -/** - * Run a list of commands separated by ; or even \0 - * - * Note that if 'len' is not -1, then the command does not need to be nul - * terminated, Memory will be allocated for the command in that case. - * - * @param cmd List of commands to run, each separated bu semicolon - * @param len Length of commands excluding terminator if known (-1 if not) - * @param flag Execution flags (CMD_FLAG_...) - * @return 0 on success, or != 0 on error. - */ -int run_command_list(const char *cmd, int len, int flag); int checkflash(void); int checkdram(void); @@ -99,15 +72,6 @@ extern u8 __dtb_dt_begin[]; /* embedded device tree blob */ extern u8 __dtb_dt_spl_begin[]; /* embedded device tree blob for SPL/TPL */ int mdm_init(void); -/** - * Show the DRAM size in a board-specific way - * - * This is used by boards to display DRAM information in their own way. - * - * @param size Size of DRAM (which should be displayed along with other info) - */ -void board_show_dram(phys_size_t size); - /** * arch_fixup_fdt() - Write arch-specific information to fdt * @@ -137,115 +101,6 @@ int do_fat_fsload(cmd_tbl_t *, int, int, char * const []); /* common/cmd_ext2.c */ int do_ext2load(cmd_tbl_t *, int, int, char * const []); -/* common/cmd_nvedit.c */ -int env_init (void); -void env_relocate (void); -int envmatch (uchar *, int); - -/** - * env_get() - Look up the value of an environment variable - * - * In U-Boot proper this can be called before relocation (which is when the - * environment is loaded from storage, i.e. GD_FLG_ENV_READY is 0). In that - * case this function calls env_get_f(). - * - * @varname: Variable to look up - * @return value of variable, or NULL if not found - */ -char *env_get(const char *varname); - -/** - * env_get_f() - Look up the value of an environment variable (early) - * - * This function is called from env_get() if the environment has not been - * loaded yet (GD_FLG_ENV_READY flag is 0). Some environment locations will - * support reading the value (slowly) and some will not. - * - * @varname: Variable to look up - * @return value of variable, or NULL if not found - */ -int env_get_f(const char *name, char *buf, unsigned len); - -/** - * env_get_ulong() - Return an environment variable as an integer value - * - * Most U-Boot environment variables store hex values. For those which store - * (e.g.) base-10 integers, this function can be used to read the value. - * - * @name: Variable to look up - * @base: Base to use (e.g. 10 for base 10, 2 for binary) - * @default_val: Default value to return if no value is found - * @return the value found, or @default_val if none - */ -ulong env_get_ulong(const char *name, int base, ulong default_val); - -/** - * env_get_hex() - Return an environment variable as a hex value - * - * Decode an environment as a hex number (it may or may not have a 0x - * prefix). If the environment variable cannot be found, or does not start - * with hex digits, the default value is returned. - * - * @varname: Variable to decode - * @default_val: Value to return on error - */ -ulong env_get_hex(const char *varname, ulong default_val); - -/* - * Read an environment variable as a boolean - * Return -1 if variable does not exist (default to true) - */ -int env_get_yesno(const char *var); - -/** - * env_set() - set an environment variable - * - * This sets or deletes the value of an environment variable. For setting the - * value the variable is created if it does not already exist. - * - * @varname: Variable to adjust - * @value: Value to set for the variable, or NULL or "" to delete the variable - * @return 0 if OK, 1 on error - */ -int env_set(const char *varname, const char *value); - -/** - * env_set_ulong() - set an environment variable to an integer - * - * @varname: Variable to adjust - * @value: Value to set for the variable (will be converted to a string) - * @return 0 if OK, 1 on error - */ -int env_set_ulong(const char *varname, ulong value); - -/** - * env_set_hex() - set an environment variable to a hex value - * - * @varname: Variable to adjust - * @value: Value to set for the variable (will be converted to a hex string) - * @return 0 if OK, 1 on error - */ -int env_set_hex(const char *varname, ulong value); - -/** - * env_set_addr - Set an environment variable to an address in hex - * - * @varname: Environment variable to set - * @addr: Value to set it to - * @return 0 if ok, 1 on error - */ -static inline int env_set_addr(const char *varname, const void *addr) -{ - return env_set_hex(varname, (ulong)addr); -} - -#ifdef CONFIG_AUTO_COMPLETE -int env_complete(char *var, int maxv, char *cmdv[], int maxsz, char *buf); -#endif -int get_env_id (void); - -void pci_init_board(void); - /* common/exports.c */ void jumptable_init(void); @@ -260,84 +115,22 @@ phys_size_t get_effective_memsize(void); void reset_phy (void); void fdc_hw_init (void); -/* $(BOARD)/eeprom.c */ -#ifdef CONFIG_CMD_EEPROM -void eeprom_init (int bus); -int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt); -int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt); -#else -/* - * Some EEPROM code is depecated because it used the legacy I2C interface. Add - * some macros here so we don't have to touch every one of those uses - */ -#define eeprom_init(bus) -#define eeprom_read(dev_addr, offset, buffer, cnt) ((void)-ENOSYS) -#define eeprom_write(dev_addr, offset, buffer, cnt) ((void)-ENOSYS) -#endif - #if !defined(CONFIG_ENV_EEPROM_IS_ON_I2C) && defined(CONFIG_SYS_I2C_EEPROM_ADDR) # define CONFIG_SYS_DEF_EEPROM_ADDR CONFIG_SYS_I2C_EEPROM_ADDR #endif -#if defined(CONFIG_MPC8XX_SPI) -extern void spi_init_f (void); -extern void spi_init_r (void); -extern ssize_t spi_read (uchar *, int, uchar *, int); -extern ssize_t spi_write (uchar *, int, uchar *, int); -#endif - -/* $(BOARD)/$(BOARD).c */ -int board_early_init_f (void); -int board_fix_fdt (void *rw_fdt_blob); /* manipulate the U-Boot fdt before its relocation */ -int board_late_init (void); -int board_postclk_init (void); /* after clocks/timebase, before env/serial */ -int board_early_init_r (void); - #if defined(CONFIG_SYS_DRAM_TEST) int testdram(void); #endif /* CONFIG_SYS_DRAM_TEST */ -/* $(CPU)/start.S */ -int icache_status (void); -void icache_enable (void); -void icache_disable(void); -int dcache_status (void); -void dcache_enable (void); -void dcache_disable(void); -void mmu_disable(void); #if defined(CONFIG_ARM) void relocate_code(ulong); #else void relocate_code(ulong, gd_t *, ulong) __attribute__ ((noreturn)); #endif -ulong get_endaddr (void); -void trap_init (ulong); - -/* $(CPU)/cpu.c */ -static inline int cpumask_next(int cpu, unsigned int mask) -{ - for (cpu++; !((1 << cpu) & mask); cpu++) - ; - - return cpu; -} - -#define for_each_cpu(iter, cpu, num_cpus, mask) \ - for (iter = 0, cpu = cpumask_next(-1, mask); \ - iter < num_cpus; \ - iter++, cpu = cpumask_next(cpu, mask)) \ - -int cpu_numcores (void); -int cpu_num_dspcores(void); -u32 cpu_mask (void); -u32 cpu_dsp_mask(void); -int is_core_valid (unsigned int); void s_init(void); -int checkcpu (void); -int checkicache (void); -int checkdcache (void); void upmconfig (unsigned int, unsigned int *, unsigned int); ulong get_tbclk (void); void reset_misc (void); @@ -345,212 +138,28 @@ void reset_cpu (ulong addr); void ft_cpu_setup(void *blob, bd_t *bd); void ft_pci_setup(void *blob, bd_t *bd); -void smp_set_core_boot_addr(unsigned long addr, int corenr); -void smp_kick_all_cpus(void); - -/* $(CPU)/serial.c */ -int serial_init (void); -void serial_setbrg (void); -void serial_putc (const char); -void serial_putc_raw(const char); -void serial_puts (const char *); -int serial_getc (void); -int serial_tstc (void); -int serial_setconfig(uint config); - /* $(CPU)/speed.c */ int get_clocks (void); ulong get_bus_freq (ulong); int get_serial_clock(void); -/* $(CPU)/interrupts.c */ -int interrupt_init (void); -void timer_interrupt (struct pt_regs *); -void external_interrupt (struct pt_regs *); -void irq_install_handler(int, interrupt_handler_t *, void *); -void irq_free_handler (int); -void reset_timer (void); - -/* Return value of monotonic microsecond timer */ -unsigned long timer_get_us(void); - -void enable_interrupts (void); -int disable_interrupts (void); - -/* $(CPU)/.../commproc.c */ -int dpram_init (void); -uint dpram_base(void); -uint dpram_base_align(uint align); -uint dpram_alloc(uint size); -uint dpram_alloc_align(uint size,uint align); -void bootcount_store (ulong); -ulong bootcount_load (void); - -/* $(CPU)/.../ */ -void mii_init (void); - -/* $(CPU)/.../lcd.c */ -ulong lcd_setmem (ulong); - -/* $(CPU)/.../video.c */ -ulong video_setmem (ulong); - -/* arch/$(ARCH)/lib/cache.c */ -void enable_caches(void); -void flush_cache (unsigned long, unsigned long); -void flush_dcache_all(void); -void flush_dcache_range(unsigned long start, unsigned long stop); -void invalidate_dcache_range(unsigned long start, unsigned long stop); -void invalidate_dcache_all(void); -void invalidate_icache_all(void); - -enum { - /* Disable caches (else flush caches but leave them active) */ - CBL_DISABLE_CACHES = 1 << 0, - CBL_SHOW_BOOTSTAGE_REPORT = 1 << 1, - - CBL_ALL = 3, -}; - -/** - * Clean up ready for linux - * - * @param flags Flags to control what is done - */ -int cleanup_before_linux_select(int flags); - -/* arch/$(ARCH)/lib/ticks.S */ -uint64_t get_ticks(void); -void wait_ticks (unsigned long); - -/* arch/$(ARCH)/lib/time.c */ -ulong usec2ticks (unsigned long usec); -ulong ticks2usec (unsigned long ticks); - -/* lib/gunzip.c */ -int gzip_parse_header(const unsigned char *src, unsigned long len); -int gunzip(void *, int, unsigned char *, unsigned long *); -int zunzip(void *dst, int dstlen, unsigned char *src, unsigned long *lenp, - int stoponerr, int offset); - -/** - * gzwrite progress indicators: defined weak to allow board-specific - * overrides: - * - * gzwrite_progress_init called on startup - * gzwrite_progress called during decompress/write loop - * gzwrite_progress_finish called at end of loop to - * indicate success (retcode=0) or failure - */ -void gzwrite_progress_init(u64 expected_size); - -void gzwrite_progress(int iteration, - u64 bytes_written, - u64 total_bytes); - -void gzwrite_progress_finish(int retcode, - u64 totalwritten, - u64 totalsize, - u32 expected_crc, - u32 calculated_crc); - -/** - * decompress and write gzipped image from memory to block device - * - * @param src compressed image address - * @param len compressed image length in bytes - * @param dev block device descriptor - * @param szwritebuf bytes per write (pad to erase size) - * @param startoffs offset in bytes of first write - * @param szexpected expected uncompressed length - * may be zero to use gzip trailer - * for files under 4GiB - */ -int gzwrite(unsigned char *src, int len, - struct blk_desc *dev, - unsigned long szwritebuf, - u64 startoffs, - u64 szexpected); - -/* lib/lz4_wrapper.c */ -int ulz4fn(const void *src, size_t srcn, void *dst, size_t *dstn); - -/* lib/qsort.c */ -void qsort(void *base, size_t nmemb, size_t size, - int(*compar)(const void *, const void *)); -int strcmp_compar(const void *, const void *); - /* lib/uuid.c */ #include /* lib/vsprintf.c */ #include -/* lib/strmhz.c */ -char * strmhz(char *buf, unsigned long hz); - -/* lib/crc32.c */ -#include - -/* lib/rand.c */ -#define RAND_MAX -1U -void srand(unsigned int seed); -unsigned int rand(void); -unsigned int rand_r(unsigned int *seedp); - -/* - * STDIO based functions (can always be used) - */ -/* serial stuff */ -int serial_printf (const char *fmt, ...) - __attribute__ ((format (__printf__, 1, 2))); - -/* lib/gzip.c */ -int gzip(void *dst, unsigned long *lenp, - unsigned char *src, unsigned long srclen); -int zzip(void *dst, unsigned long *lenp, unsigned char *src, - unsigned long srclen, int stoponerr, - int (*func)(unsigned long, unsigned long)); - /* lib/net_utils.c */ #include -static inline struct in_addr env_get_ip(char *var) -{ - return string_to_ip(env_get(var)); -} - -int pcmcia_init (void); - -#ifdef CONFIG_LED_STATUS -# include -#endif #include -#ifdef CONFIG_SHOW_ACTIVITY -void show_activity(int arg); -#endif - -/* Multicore arch functions */ -#ifdef CONFIG_MP -int cpu_status(u32 nr); -int cpu_reset(u32 nr); -int cpu_disable(u32 nr); -int cpu_release(u32 nr, int argc, char * const argv[]); -#endif - #else /* __ASSEMBLY__ */ -/* Drop a C type modifier (like in 3UL) for constants used in assembly. */ -#define _AC(X, Y) X - #endif /* __ASSEMBLY__ */ /* Put only stuff here that the assembler can digest */ -/* Declare an unsigned long constant digestable both by C and an assembler. */ -#define UL(x) _AC(x, UL) - #ifdef CONFIG_POST #define CONFIG_HAS_POST #ifndef CONFIG_POST_ALT_LIST @@ -558,11 +167,6 @@ int cpu_release(u32 nr, int argc, char * const argv[]); #endif #endif -#ifdef CONFIG_INIT_CRITICAL -#error CONFIG_INIT_CRITICAL is deprecated! -#error Read section CONFIG_SKIP_LOWLEVEL_INIT in README. -#endif - #define ROUND(a,b) (((a) + (b) - 1) & ~((b) - 1)) /* @@ -585,7 +189,7 @@ int cpu_release(u32 nr, int argc, char * const argv[]); /* Pull in stuff for the build system */ #ifdef DO_DEPS_ONLY -# include +# include #endif #endif /* __COMMON_H_ */