X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fclk.h;h=18b2e3ca54c53ab37d2ac743d9327b7c71424dc0;hb=83a9f0a3d703a37044d2438a3c4223561de503b3;hp=254ad2b8761bf4acef3a5b4b06b3c6bc4c11ac11;hpb=7a1af7a79bd79ded6a78d0c1afdbc3353669e313;p=oweals%2Fu-boot.git diff --git a/include/clk.h b/include/clk.h index 254ad2b876..18b2e3ca54 100644 --- a/include/clk.h +++ b/include/clk.h @@ -1,86 +1,381 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ /* * Copyright (c) 2015 Google, Inc * Written by Simon Glass - * - * SPDX-License-Identifier: GPL-2.0+ + * Copyright (c) 2016, NVIDIA CORPORATION. */ #ifndef _CLK_H_ #define _CLK_H_ -int soc_clk_dump(void); +#include +#include +#include -struct clk_ops { - /** - * get_rate() - Get current clock rate - * - * @dev: Device to check (UCLASS_CLK) - * @return clock rate in Hz, or -ve error code - */ - ulong (*get_rate)(struct udevice *dev); - - /** - * set_rate() - Set current clock rate - * - * @dev: Device to adjust - * @rate: New clock rate in Hz - * @return new rate, or -ve error code - */ - ulong (*set_rate)(struct udevice *dev, ulong rate); - - /** - * clk_set_periph_rate() - Set clock rate for a peripheral - * - * @dev: Device to adjust (UCLASS_CLK) - * @rate: New clock rate in Hz - * @return new clock rate in Hz, or -ve error code - */ - ulong (*get_periph_rate)(struct udevice *dev, int periph); - - /** - * clk_set_periph_rate() - Set current clock rate for a peripheral - * - * @dev: Device to update (UCLASS_CLK) - * @periph: Peripheral ID to cupdate - * @return new clock rate in Hz, or -ve error code +/** + * A clock is a hardware signal that oscillates autonomously at a specific + * frequency and duty cycle. Most hardware modules require one or more clock + * signal to drive their operation. Clock signals are typically generated + * externally to the HW module consuming them, by an entity this API calls a + * clock provider. This API provides a standard means for drivers to enable and + * disable clocks, and to set the rate at which they oscillate. + * + * A driver that implements UCLASS_CLK is a clock provider. A provider will + * often implement multiple separate clocks, since the hardware it manages + * often has this capability. clk-uclass.h describes the interface which + * clock providers must implement. + * + * Clock consumers/clients are the HW modules driven by the clock signals. This + * header file describes the API used by drivers for those HW modules. + */ + +struct udevice; + +/** + * struct clk - A handle to (allowing control of) a single clock. + * + * Clients provide storage for clock handles. The content of the structure is + * managed solely by the clock API and clock drivers. A clock struct is + * initialized by "get"ing the clock struct. The clock struct is passed to all + * other clock APIs to identify which clock signal to operate upon. + * + * @dev: The device which implements the clock signal. + * @rate: The clock rate (in HZ). + * @flags: Flags used across common clock structure (e.g. CLK_) + * Clock IP blocks specific flags (i.e. mux, div, gate, etc) are defined + * in struct's for those devices (e.g. struct clk_mux). + * @id: The clock signal ID within the provider. + * @data: An optional data field for scenarios where a single integer ID is not + * sufficient. If used, it can be populated through an .of_xlate op and + * processed during the various clock ops. + * + * Should additional information to identify and configure any clock signal + * for any provider be required in the future, the struct could be expanded to + * either (a) add more fields to allow clock providers to store additional + * information, or (b) replace the id field with an opaque pointer, which the + * provider would dynamically allocated during its .of_xlate op, and process + * during is .request op. This may require the addition of an extra op to clean + * up the allocation. + */ +struct clk { + struct udevice *dev; + long long rate; /* in HZ */ + u32 flags; + int enable_count; + /* + * Written by of_xlate. In the future, we might add more fields here. */ - ulong (*set_periph_rate)(struct udevice *dev, int periph, ulong rate); + unsigned long id; + unsigned long data; +}; + +/** + * struct clk_bulk - A handle to (allowing control of) a bulk of clocks. + * + * Clients provide storage for the clock bulk. The content of the structure is + * managed solely by the clock API. A clock bulk struct is + * initialized by "get"ing the clock bulk struct. + * The clock bulk struct is passed to all other bulk clock APIs to apply + * the API to all the clock in the bulk struct. + * + * @clks: An array of clock handles. + * @count: The number of clock handles in the clks array. + */ +struct clk_bulk { + struct clk *clks; + unsigned int count; }; -#define clk_get_ops(dev) ((struct clk_ops *)(dev)->driver->ops) +#if CONFIG_IS_ENABLED(OF_CONTROL) && CONFIG_IS_ENABLED(CLK) +struct phandle_1_arg; +int clk_get_by_index_platdata(struct udevice *dev, int index, + struct phandle_1_arg *cells, struct clk *clk); + +/** + * clock_get_by_index - Get/request a clock by integer index. + * + * This looks up and requests a clock. The index is relative to the client + * device; each device is assumed to have n clocks associated with it somehow, + * and this function finds and requests one of them. The mapping of client + * device clock indices to provider clocks may be via device-tree properties, + * board-provided mapping tables, or some other mechanism. + * + * @dev: The client device. + * @index: The index of the clock to request, within the client's list of + * clocks. + * @clock A pointer to a clock struct to initialize. + * @return 0 if OK, or a negative error code. + */ +int clk_get_by_index(struct udevice *dev, int index, struct clk *clk); + +/** + * clock_get_by_index_nodev - Get/request a clock by integer index + * without a device. + * + * This is a version of clk_get_by_index() that does not use a device. + * + * @node: The client ofnode. + * @index: The index of the clock to request, within the client's list of + * clocks. + * @clock A pointer to a clock struct to initialize. + * @return 0 if OK, or a negative error code. + */ +int clk_get_by_index_nodev(ofnode node, int index, struct clk *clk); + +/** + * clock_get_bulk - Get/request all clocks of a device. + * + * This looks up and requests all clocks of the client device; each device is + * assumed to have n clocks associated with it somehow, and this function finds + * and requests all of them in a separate structure. The mapping of client + * device clock indices to provider clocks may be via device-tree properties, + * board-provided mapping tables, or some other mechanism. + * + * @dev: The client device. + * @bulk A pointer to a clock bulk struct to initialize. + * @return 0 if OK, or a negative error code. + */ +int clk_get_bulk(struct udevice *dev, struct clk_bulk *bulk); + +/** + * clock_get_by_name - Get/request a clock by name. + * + * This looks up and requests a clock. The name is relative to the client + * device; each device is assumed to have n clocks associated with it somehow, + * and this function finds and requests one of them. The mapping of client + * device clock names to provider clocks may be via device-tree properties, + * board-provided mapping tables, or some other mechanism. + * + * @dev: The client device. + * @name: The name of the clock to request, within the client's list of + * clocks. + * @clock: A pointer to a clock struct to initialize. + * @return 0 if OK, or a negative error code. + */ +int clk_get_by_name(struct udevice *dev, const char *name, struct clk *clk); + +/** + * clk_release_all() - Disable (turn off)/Free an array of previously + * requested clocks. + * + * For each clock contained in the clock array, this function will check if + * clock has been previously requested and then will disable and free it. + * + * @clk: A clock struct array that was previously successfully + * requested by clk_request/get_by_*(). + * @count Number of clock contained in the array + * @return zero on success, or -ve error code. + */ +int clk_release_all(struct clk *clk, int count); + +#else +static inline int clk_get_by_index(struct udevice *dev, int index, + struct clk *clk) +{ + return -ENOSYS; +} + +static inline int clk_get_bulk(struct udevice *dev, struct clk_bulk *bulk) +{ + return -ENOSYS; +} + +static inline int clk_get_by_name(struct udevice *dev, const char *name, + struct clk *clk) +{ + return -ENOSYS; +} + +static inline int clk_release_all(struct clk *clk, int count) +{ + return -ENOSYS; +} +#endif + +#if (CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)) && \ + CONFIG_IS_ENABLED(CLK) +/** + * clk_set_defaults - Process 'assigned-{clocks/clock-parents/clock-rates}' + * properties to configure clocks + * + * @dev: A device to process (the ofnode associated with this device + * will be processed). + */ +int clk_set_defaults(struct udevice *dev); +#else +static inline int clk_set_defaults(struct udevice *dev) +{ + return 0; +} +#endif + +/** + * clk_release_bulk() - Disable (turn off)/Free an array of previously + * requested clocks in a clock bulk struct. + * + * For each clock contained in the clock bulk struct, this function will check + * if clock has been previously requested and then will disable and free it. + * + * @clk: A clock bulk struct that was previously successfully + * requested by clk_get_bulk(). + * @return zero on success, or -ve error code. + */ +static inline int clk_release_bulk(struct clk_bulk *bulk) +{ + return clk_release_all(bulk->clks, bulk->count); +} + +/** + * clk_request - Request a clock by provider-specific ID. + * + * This requests a clock using a provider-specific ID. Generally, this function + * should not be used, since clk_get_by_index/name() provide an interface that + * better separates clients from intimate knowledge of clock providers. + * However, this function may be useful in core SoC-specific code. + * + * @dev: The clock provider device. + * @clock: A pointer to a clock struct to initialize. The caller must + * have already initialized any field in this struct which the + * clock provider uses to identify the clock. + * @return 0 if OK, or a negative error code. + */ +int clk_request(struct udevice *dev, struct clk *clk); + +/** + * clock_free - Free a previously requested clock. + * + * @clock: A clock struct that was previously successfully requested by + * clk_request/get_by_*(). + * @return 0 if OK, or a negative error code. + */ +int clk_free(struct clk *clk); + +/** + * clk_get_rate() - Get current clock rate. + * + * @clk: A clock struct that was previously successfully requested by + * clk_request/get_by_*(). + * @return clock rate in Hz, or -ve error code. + */ +ulong clk_get_rate(struct clk *clk); + +/** + * clk_get_parent() - Get current clock's parent. + * + * @clk: A clock struct that was previously successfully requested by + * clk_request/get_by_*(). + * @return pointer to parent's struct clk, or error code passed as pointer + */ +struct clk *clk_get_parent(struct clk *clk); + +/** + * clk_get_parent_rate() - Get parent of current clock rate. + * + * @clk: A clock struct that was previously successfully requested by + * clk_request/get_by_*(). + * @return clock rate in Hz, or -ve error code. + */ +long long clk_get_parent_rate(struct clk *clk); + +/** + * clk_set_rate() - Set current clock rate. + * + * @clk: A clock struct that was previously successfully requested by + * clk_request/get_by_*(). + * @rate: New clock rate in Hz. + * @return new rate, or -ve error code. + */ +ulong clk_set_rate(struct clk *clk, ulong rate); + +/** + * clk_set_parent() - Set current clock parent. + * + * @clk: A clock struct that was previously successfully requested by + * clk_request/get_by_*(). + * @parent: A clock struct that was previously successfully requested by + * clk_request/get_by_*(). + * @return new rate, or -ve error code. + */ +int clk_set_parent(struct clk *clk, struct clk *parent); /** - * clk_get_rate() - Get current clock rate + * clk_enable() - Enable (turn on) a clock. * - * @dev: Device to check (UCLASS_CLK) - * @return clock rate in Hz, or -ve error code + * @clk: A clock struct that was previously successfully requested by + * clk_request/get_by_*(). + * @return zero on success, or -ve error code. */ -ulong clk_get_rate(struct udevice *dev); +int clk_enable(struct clk *clk); /** - * set_rate() - Set current clock rate + * clk_enable_bulk() - Enable (turn on) all clocks in a clock bulk struct. * - * @dev: Device to adjust - * @rate: New clock rate in Hz - * @return new rate, or -ve error code + * @bulk: A clock bulk struct that was previously successfully requested + * by clk_get_bulk(). + * @return zero on success, or -ve error code. */ -ulong clk_set_rate(struct udevice *dev, ulong rate); +int clk_enable_bulk(struct clk_bulk *bulk); /** - * clk_get_periph_rate() - Get current clock rate for a peripheral + * clk_disable() - Disable (turn off) a clock. * - * @dev: Device to check (UCLASS_CLK) - * @return clock rate in Hz, -ve error code + * @clk: A clock struct that was previously successfully requested by + * clk_request/get_by_*(). + * @return zero on success, or -ve error code. */ -ulong clk_get_periph_rate(struct udevice *dev, int periph); +int clk_disable(struct clk *clk); /** - * clk_set_periph_rate() - Set current clock rate for a peripheral + * clk_disable_bulk() - Disable (turn off) all clocks in a clock bulk struct. * - * @dev: Device to update (UCLASS_CLK) - * @periph: Peripheral ID to cupdate - * @return new clock rate in Hz, or -ve error code + * @bulk: A clock bulk struct that was previously successfully requested + * by clk_get_bulk(). + * @return zero on success, or -ve error code. */ -ulong clk_set_periph_rate(struct udevice *dev, int periph, ulong rate); +int clk_disable_bulk(struct clk_bulk *bulk); + +/** + * clk_is_match - check if two clk's point to the same hardware clock + * @p: clk compared against q + * @q: clk compared against p + * + * Returns true if the two struct clk pointers both point to the same hardware + * clock node. + * + * Returns false otherwise. Note that two NULL clks are treated as matching. + */ +bool clk_is_match(const struct clk *p, const struct clk *q); + +int soc_clk_dump(void); -#endif /* _CLK_H_ */ +/** + * clk_valid() - check if clk is valid + * + * @clk: the clock to check + * @return true if valid, or false + */ +static inline bool clk_valid(struct clk *clk) +{ + return !!clk->dev; +} + +/** + * clk_get_by_id() - Get the clock by its ID + * + * @id: The clock ID to search for + * + * @clkp: A pointer to clock struct that has been found among added clocks + * to UCLASS_CLK + * @return zero on success, or -ENOENT on error + */ +int clk_get_by_id(ulong id, struct clk **clkp); + +/** + * clk_dev_binded() - Check whether the clk has a device binded + * + * @clk A pointer to the clk + * + * @return true on binded, or false on no + */ +bool clk_dev_binded(struct clk *clk); +#endif