X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Faxp221.h;h=0ee21b62806bf51f7e7b227daa9f6d43a9a8b5d1;hb=c3c44954ed34637f2bb1220825ff0910abb97f6e;hp=be6058e43951105c603544b84f8d3d375645150b;hpb=1986c4ca0b250c83434aae985e74e05f96ccb1a4;p=oweals%2Fu-boot.git

diff --git a/include/axp221.h b/include/axp221.h
index be6058e439..0ee21b6280 100644
--- a/include/axp221.h
+++ b/include/axp221.h
@@ -6,17 +6,7 @@
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
-#define AXP221_CHIP_ADDR 0x68
-#define AXP221_CTRL_ADDR 0x3e
-#define AXP221_INIT_DATA 0x3e
-
-#define AXP223_DEVICE_ADDR 0x3a3
-#define AXP223_RUNTIME_ADDR 0x2d
-
 /* Page 0 addresses */
-#define AXP221_POWER_STATUS	0x00
-#define AXP221_POWER_STATUS_VBUS_AVAIL	(1 << 5)
-#define AXP221_POWER_STATUS_VBUS_USABLE	(1 << 4)
 #define AXP221_CHIP_ID		0x03
 #define AXP221_OUTPUT_CTRL1	0x10
 #define AXP221_OUTPUT_CTRL1_DCDC0_EN	(1 << 0)
@@ -62,27 +52,13 @@
 /* Page 1 addresses */
 #define AXP221_SID		0x20
 
-/* We support vbus detection */
-#define AXP_VBUS_DETECT
-
-/* We support drivebus control */
-#define AXP_DRIVEBUS
-
-int axp221_set_dcdc1(unsigned int mvolt);
-int axp221_set_dcdc2(unsigned int mvolt);
-int axp221_set_dcdc3(unsigned int mvolt);
-int axp221_set_dcdc4(unsigned int mvolt);
-int axp221_set_dcdc5(unsigned int mvolt);
-int axp221_set_dldo1(unsigned int mvolt);
-int axp221_set_dldo2(unsigned int mvolt);
-int axp221_set_dldo3(unsigned int mvolt);
-int axp221_set_dldo4(unsigned int mvolt);
-int axp221_set_aldo1(unsigned int mvolt);
-int axp221_set_aldo2(unsigned int mvolt);
-int axp221_set_aldo3(unsigned int mvolt);
-int axp221_set_eldo(int eldo_num, unsigned int mvolt);
-int axp221_init(void);
-int axp221_get_sid(unsigned int *sid);
-int axp_get_vbus(void);
-int axp_drivebus_enable(void);
-int axp_drivebus_disable(void);
+/* For axp_gpio.c */
+#define AXP_POWER_STATUS		0x00
+#define AXP_POWER_STATUS_VBUS_PRESENT		(1 << 5)
+#define AXP_GPIO0_CTRL			0x90
+#define AXP_GPIO1_CTRL			0x92
+#define AXP_GPIO_CTRL_OUTPUT_LOW		0x00 /* Drive pin low */
+#define AXP_GPIO_CTRL_OUTPUT_HIGH		0x01 /* Drive pin high */
+#define AXP_GPIO_CTRL_INPUT			0x02 /* Input */
+#define AXP_GPIO_STATE			0x94
+#define AXP_GPIO_STATE_OFFSET			0