X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fasm-ppc%2Fprocessor.h;h=f102600038bf836938eafeb47c561b3d016076ee;hb=ddd4123336aad881f50dc34892ac150cfa8143fe;hp=71fadbc918b849b41d0a592ba7522fb36d06f4bc;hpb=0a7c5391a0a881cef208d286e6c9d3ebe5851b94;p=oweals%2Fu-boot.git

diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h
index 71fadbc918..f102600038 100644
--- a/include/asm-ppc/processor.h
+++ b/include/asm-ppc/processor.h
@@ -200,6 +200,11 @@
 #define SPRN_HASH1	0x3D2	/* Primary Hash Address Register */
 #define SPRN_HASH2	0x3D3	/* Secondary Hash Address Resgister */
 #define SPRN_HID0	0x3F0	/* Hardware Implementation Register 0 */
+
+#define HID0_ICE_SHIFT		15
+#define HID0_DCE_SHIFT		14
+#define HID0_DLOCK_SHIFT	12
+
 #define   HID0_EMCP	(1<<31)		/* Enable Machine Check pin */
 #define   HID0_EBA	(1<<29)		/* Enable Bus Address Parity */
 #define   HID0_EBD	(1<<28)		/* Enable Bus Data Parity */
@@ -211,10 +216,10 @@
 #define   HID0_NAP	(1<<22)
 #define   HID0_SLEEP	(1<<21)
 #define   HID0_DPM	(1<<20)
-#define   HID0_ICE	(1<<15)		/* Instruction Cache Enable */
-#define   HID0_DCE	(1<<14)		/* Data Cache Enable */
+#define   HID0_ICE	(1<<HID0_ICE_SHIFT)	/* Instruction Cache Enable */
+#define   HID0_DCE	(1<<HID0_DCE_SHIFT)	/* Data Cache Enable */
 #define   HID0_ILOCK	(1<<13)		/* Instruction Cache Lock */
-#define   HID0_DLOCK	(1<<12)		/* Data Cache Lock */
+#define   HID0_DLOCK	(1<<HID0_DLOCK_SHIFT)	/* Data Cache Lock */
 #define   HID0_ICFI	(1<<11)		/* Instr. Cache Flash Invalidate */
 #define   HID0_DCFI	(1<<10)		/* Data Cache Flash Invalidate */
 #define   HID0_DCI	HID0_DCFI
@@ -259,6 +264,7 @@
 #define SPRN_ICTC	0x3FB	/* Instruction Cache Throttling Control Reg */
 #define SPRN_IMISS	0x3D4	/* Instruction TLB Miss Register */
 #define SPRN_IMMR	0x27E  	/* Internal Memory Map Register */
+#define SPRN_LDSTCR	0x3F8   /* Load/Store Control Register */
 #define SPRN_L2CR	0x3F9	/* Level 2 Cache Control Regsiter */
 #define SPRN_LR		0x008	/* Link Register */
 #define SPRN_MBAR       0x137   /* System memory base address */
@@ -305,10 +311,10 @@
 #define SPRN_TBHU	0x3CC	/* Time Base High User-mode */
 #define SPRN_TBLO	0x3DD	/* Time Base Low */
 #define SPRN_TBLU	0x3CD	/* Time Base Low User-mode */
-#define SPRN_TBRL	0x10D	/* Time Base Read Lower Register */
-#define SPRN_TBRU	0x10C	/* Time Base Read Upper Register */
-#define SPRN_TBWL	0x11D	/* Time Base Write Lower Register */
-#define SPRN_TBWU	0x11C	/* Time Base Write Upper Register */
+#define SPRN_TBRL	0x10C	/* Time Base Read Lower Register */
+#define SPRN_TBRU	0x10D	/* Time Base Read Upper Register */
+#define SPRN_TBWL	0x11C	/* Time Base Write Lower Register */
+#define SPRN_TBWU	0x11D	/* Time Base Write Upper Register */
 #ifndef CONFIG_BOOKE
 #define SPRN_TCR	0x3DA	/* Timer Control Register */
 #else
@@ -420,6 +426,7 @@
 #define SPRN_MAS4       0x274   /* MMU Assist Register 4 */
 #define SPRN_MAS5       0x275   /* MMU Assist Register 5 */
 #define SPRN_MAS6       0x276   /* MMU Assist Register 6 */
+#define SPRN_MAS7	0x3B0	/* MMU Assist Register 7 */
 
 #define SPRN_IVOR32     0x210   /* Interrupt Vector Offset Register 32 */
 #define SPRN_IVOR33     0x211   /* Interrupt Vector Offset Register 33 */
@@ -437,6 +444,11 @@
 #define SPRN_MCSR	0x23c	/* Machine Check Syndrome register */
 #define ESR_ST          0x00800000      /* Store Operation */
 
+#if defined(CONFIG_MPC86xx)
+#define SPRN_MSSCRO	0x3f6
+#endif
+
+
 /* Short-hand versions for a number of the above SPRNs */
 
 #define CTR	SPRN_CTR	/* Counter Register */
@@ -495,10 +507,14 @@
 #define ICMP	SPRN_ICMP	/* Instruction TLB Compare Register */
 #define IMISS	SPRN_IMISS	/* Instruction TLB Miss Register */
 #define IMMR	SPRN_IMMR      	/* PPC 860/821 Internal Memory Map Register */
+#define LDSTCR	SPRN_LDSTCR     /* Load/Store Control Register */
 #define L2CR	SPRN_L2CR    	/* PPC 750 L2 control register */
 #define LR	SPRN_LR
 #define MBAR    SPRN_MBAR       /* System memory base address */
-#if defined(CONFIG_E500)
+#if defined(CONFIG_MPC86xx)
+#define MSSCR0	SPRN_MSSCRO
+#endif
+#if defined(CONFIG_E500) || defined(CONFIG_MPC86xx)
 #define PIR	SPRN_PIR
 #endif
 #define SVR	SPRN_SVR	/* System-On-Chip Version Register */
@@ -532,7 +548,7 @@
 #define CSRR0	SPRN_CSRR0
 #define CSRR1	SPRN_CSRR1
 #define IVPR	SPRN_IVPR
-#define USPRG0	SPRN_USPRG0
+#define USPRG0	SPRN_USPRG
 #define SPRG4R	SPRN_SPRG4R
 #define SPRG5R	SPRN_SPRG5R
 #define SPRG6R	SPRN_SPRG6R
@@ -584,6 +600,7 @@
 #define MAS4	SPRN_MAS4
 #define MAS5	SPRN_MAS5
 #define MAS6	SPRN_MAS6
+#define MAS7	SPRN_MAS7
 
 /* Device Control Registers */
 
@@ -687,7 +704,7 @@
 #define PVR_REV(pvr)  (((pvr) >>   0) & 0xFFFF)	/* Revison field */
 
 /*
- * IBM has further subdivided the standard PowerPC 16-bit version and
+ * AMCC has further subdivided the standard PowerPC 16-bit version and
  * revision subfields of the PVR for the PowerPC 403s into the following:
  */
 
@@ -716,10 +733,28 @@
 #define PVR_405GPR_RB	0x50910951
 #define PVR_440GP_RB	0x40120440
 #define PVR_440GP_RC	0x40120481
+#define PVR_440EP_RA	0x42221850
+#define PVR_440EP_RB	0x422218D3 /* 440EP rev B and 440GR rev A have same PVR */
+#define PVR_440EP_RC	0x422218D4 /* 440EP rev C and 440GR rev B have same PVR */
+#define PVR_440GR_RA	0x422218D3 /* 440EP rev B and 440GR rev A have same PVR */
+#define PVR_440GR_RB	0x422218D4 /* 440EP rev C and 440GR rev B have same PVR */
+#define PVR_440EPX1_RA  0x216218D0 /* 440EPX rev A with Security / Kasumi */
+#define PVR_440EPX2_RA  0x216218D4 /* 440EPX rev A without Security / Kasumi */
+#define PVR_440GRX1_RA  0x216218D8 /* 440GRX rev A with Security / Kasumi */
+#define PVR_440GRX2_RA  0x216218DC /* 440GRX rev A without Security / Kasumi */
 #define PVR_440GX_RA	0x51B21850
 #define PVR_440GX_RB	0x51B21851
 #define PVR_440GX_RC	0x51B21892
+#define PVR_440GX_RF	0x51B21894
 #define PVR_405EP_RB	0x51210950
+#define PVR_440SP_6_RAB	0x53221850 /* 440SP rev A&B with RAID 6 support enabled	*/
+#define PVR_440SP_RAB	0x53321850 /* 440SP rev A&B without RAID 6 support	*/
+#define PVR_440SP_6_RC	0x53221891 /* 440SP rev C with RAID 6 support enabled	*/
+#define PVR_440SP_RC	0x53321891 /* 440SP rev C without RAID 6 support	*/
+#define PVR_440SPe_6_RA	0x53421890 /* 440SPe rev A with RAID 6 support enabled	*/
+#define PVR_440SPe_RA	0x53521890 /* 440SPe rev A without RAID 6 support	*/
+#define PVR_440SPe_6_RB	0x53421891 /* 440SPe rev B with RAID 6 support enabled	*/
+#define PVR_440SPe_RB	0x53521891 /* 440SPe rev B without RAID 6 support	*/
 #define PVR_601		0x00010000
 #define PVR_602		0x00050000
 #define PVR_603		0x00030000
@@ -742,6 +777,8 @@
 #define PVR_85xx_REV1	(PVR_85xx | 0x0010)
 #define PVR_85xx_REV2	(PVR_85xx | 0x0020)
 
+#define PVR_86xx	0x80040000
+#define PVR_86xx_REV1	(PVR_86xx | 0x0010)
 
 /*
  * For the 8xx processors, all of them report the same PVR family for
@@ -777,6 +814,8 @@
 #define SVR_VER(svr)	(((svr) >>  16) & 0xFFFF)	/* Version field */
 #define SVR_REV(svr)	(((svr) >>   0) & 0xFFFF)	/* Revison field */
 
+#define SVR_SUBVER(svr)	(((svr) >>  8) & 0xFF)	/* Process/MFG sub-version */
+
 #define SVR_FAM(svr)	(((svr) >> 20) & 0xFFF)	/* Family field */
 #define SVR_MEM(svr)	(((svr) >> 16) & 0xF)	/* Member field */
 
@@ -792,6 +831,9 @@
 #define SVR_8560	0x8070
 #define SVR_8555	0x8079
 #define SVR_8541	0x807A
+#define SVR_8548	0x8031
+#define SVR_8548_E	0x8039
+#define SVR_8641	0x8090
 
 
 /* I am just adding a single entry for 8260 boards.  I think we may be
@@ -814,7 +856,7 @@
 #define _MACH_gemini	0x00000200	/* Synergy Microsystems gemini board */
 #define _MACH_classic	0x00000400	/* RPCG RPX-Classic 8xx board */
 #define _MACH_oak	0x00000800	/* IBM "Oak" 403 eval. board */
-#define _MACH_walnut	0x00001000	/* IBM "Walnut" 405GP eval. board */
+#define _MACH_walnut	0x00001000	/* AMCC "Walnut" 405GP eval. board */
 #define _MACH_8260	0x00002000	/* Generic 8260 */
 #define _MACH_sandpoint 0x00004000	/* Motorola SPS Processor eval board */
 #define _MACH_tqm860	0x00008000	/* TQM860/L */