X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fahci.h;h=fb96dd886115c77ddb103d3942e4c3356c06accc;hb=8510580f2e85a8687b40fe5fc3d8c060e5278505;hp=a956c6ff5df78c37c0a66cdde88772dd251f34a3;hpb=4edde96111aefac63d6aaca6ba87a90d149e973e;p=oweals%2Fu-boot.git

diff --git a/include/ahci.h b/include/ahci.h
index a956c6ff5d..fb96dd8861 100644
--- a/include/ahci.h
+++ b/include/ahci.h
@@ -1,9 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) Freescale Semiconductor, Inc. 2006.
  * Author: Jason Jin<Jason.jin@freescale.com>
  *         Zhang Wei<wei.zhang@freescale.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 #ifndef _AHCI_H_
 #define _AHCI_H_
@@ -135,8 +134,6 @@ struct ahci_sg {
 };
 
 struct ahci_ioports {
-	void __iomem	*cmd_addr;
-	void __iomem	*scr_addr;
 	void __iomem	*port_mmio;
 	struct ahci_cmd_hdr	*cmd_slot;
 	struct ahci_sg		*cmd_tbl_sg;
@@ -144,13 +141,25 @@ struct ahci_ioports {
 	u32	rx_fis;
 };
 
-struct ahci_probe_ent {
-#ifdef CONFIG_DM_PCI
+/**
+ * struct ahci_uc_priv - information about an AHCI controller
+ *
+ * When driver model is used, this is accessible using dev_get_uclass_priv(dev)
+ * where dev is the controller (although at present it sometimes stands alone).
+ */
+struct ahci_uc_priv {
+#if defined(CONFIG_DM_PCI) || defined(CONFIG_DM_SCSI)
+	/*
+	 * TODO(sjg@chromium.org): Drop this once this structure is only used
+	 * in a driver-model context (i.e. attached to a device with
+	 * dev_get_uclass_priv()
+	 */
 	struct udevice *dev;
 #else
 	pci_dev_t	dev;
 #endif
 	struct ahci_ioports	port[AHCI_MAX_PORTS];
+	u16 *ataid[AHCI_MAX_PORTS];
 	u32	n_ports;
 	u32	hard_port_no;
 	u32	host_flags;
@@ -164,7 +173,116 @@ struct ahci_probe_ent {
 	u32	link_port_map; /*linkup port map*/
 };
 
+struct ahci_ops {
+	/**
+	 * reset() - reset the controller
+	 *
+	 * @dev:	Controller to reset
+	 * @return 0 if OK, -ve on error
+	 */
+	int (*reset)(struct udevice *dev);
+
+	/**
+	 * port_status() - get the status of a SATA port
+	 *
+	 * @dev:	Controller to reset
+	 * @port:	Port number to check (0 for first)
+	 * @return 0 if detected, -ENXIO if nothing on port, other -ve on error
+	 */
+	int (*port_status)(struct udevice *dev, int port);
+
+	/**
+	 * scan() - scan SATA ports
+	 *
+	 * @dev:	Controller to scan
+	 * @return 0 if OK, -ve on error
+	 */
+	int (*scan)(struct udevice *dev);
+};
+
+#define ahci_get_ops(dev)        ((struct ahci_ops *)(dev)->driver->ops)
+
+/**
+ * sata_reset() - reset the controller
+ *
+ * @dev:	Controller to reset
+ * @return 0 if OK, -ve on error
+ */
+int sata_reset(struct udevice *dev);
+
+/**
+ * sata_port_status() - get the status of a SATA port
+ *
+ * @dev:	Controller to reset
+ * @port:	Port number to check (0 for first)
+ * @return 0 if detected, -ENXIO if nothin on port, other -ve on error
+ */
+int sata_dm_port_status(struct udevice *dev, int port);
+
+/**
+ * sata_scan() - scan SATA ports
+ *
+ * @dev:	Controller to scan
+ * @return 0 if OK, -ve on error
+ */
+int sata_scan(struct udevice *dev);
+
 int ahci_init(void __iomem *base);
 int ahci_reset(void __iomem *base);
 
+/**
+ * ahci_init_one_dm() - set up a single AHCI port
+ *
+ * @dev: Controller to init
+ */
+int ahci_init_one_dm(struct udevice *dev);
+
+/**
+ * ahci_start_ports_dm() - start all AHCI ports for a controller
+ *
+ * @dev: Controller containing ports to start
+ */
+int ahci_start_ports_dm(struct udevice *dev);
+
+/**
+ * ahci_init_dm() - init AHCI for a controller, finding all ports
+ *
+ * @dev: Device to init
+ */
+int ahci_init_dm(struct udevice *dev, void __iomem *base);
+
+/**
+ * ahci_bind_scsi() - bind a new SCSI bus as a child
+ *
+ * Note that the SCSI bus device will itself bind block devices
+ *
+ * @ahci_dev: AHCI parent device
+ * @devp: Returns new SCSI bus device
+ * @return 0 if OK, -ve on error
+ */
+int ahci_bind_scsi(struct udevice *ahci_dev, struct udevice **devp);
+
+/**
+ * ahci_probe_scsi() - probe and scan the attached SCSI bus
+ *
+ * Note that the SCSI device will itself bind block devices for any storage
+ * devices it finds.
+ *
+ * @ahci_dev: AHCI parent device
+ * @base: Base address of AHCI port
+ * @return 0 if OK, -ve on error
+ */
+int ahci_probe_scsi(struct udevice *ahci_dev, ulong base);
+
+/**
+ * ahci_probe_scsi_pci() - probe and scan the attached SCSI bus on PCI
+ *
+ * Note that the SCSI device will itself bind block devices for any storage
+ * devices it finds.
+ *
+ * @ahci_dev: AHCI parent device
+ * @return 0 if OK, -ve on error
+ */
+int ahci_probe_scsi_pci(struct udevice *ahci_dev);
+
 #endif