X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=env%2FKconfig;h=f23be00a547fd43c4b127778b73000e56a3105c2;hb=5f389201dece76b484443773dce2525dc205f5a1;hp=748f534d11d1232971d49280d6dc6a78819f10a6;hpb=336aee50cf55d4d98ddf3a4412c18286e7f0a4c0;p=oweals%2Fu-boot.git diff --git a/env/Kconfig b/env/Kconfig index 748f534d11..f23be00a54 100644 --- a/env/Kconfig +++ b/env/Kconfig @@ -1,60 +1,26 @@ menu "Environment" -choice - prompt "Select the location of the environment" - default ENV_IS_IN_MMC if ARCH_SUNXI - default ENV_IS_IN_FAT if ARCH_BCM283X - default ENV_IS_IN_MMC if ARCH_UNIPHIER - default ENV_IS_IN_MMC if ARCH_EXYNOS4 - default ENV_IS_IN_MMC if MX6SX || MX7D - default ENV_IS_IN_FLASH if ARCH_CINTEGRATOR - default ENV_IS_IN_SPI_FLASH if ARMADA_XP - default ENV_IS_IN_MMC if TEGRA30 || TEGRA124 - default ENV_IS_IN_MMC if TEGRA_ARMV8_COMMON - default ENV_IS_IN_FLASH if ARCH_INTEGRATOR_CP - default ENV_IS_IN_FLASH if M548x || M547x || M5282 || MCF547x_8x - default ENV_IS_IN_FLASH if MCF532x || MCF52x2 - default ENV_IS_IN_FLASH if MPC86xx || MPC83xx - default ENV_IS_IN_FLASH if ARCH_MPC8572 || ARCH_MPC8548 || ARCH_MPC8641 - default ENV_IS_IN_FLASH if SH && !CPU_SH4 - default ENV_IS_IN_SPI_FLASH if INTEL_BAYTRAIL - default ENV_IS_IN_SPI_FLASH if INTEL_BROADWELL - default ENV_IS_IN_SPI_FLASH if NORTHBRIDGE_INTEL_IVYBRIDGE - default ENV_IS_IN_SPI_FLASH if INTEL_QUARK - default ENV_IS_IN_SPI_FLASH if INTEL_QUEENSBAY - default ENV_IS_IN_FAT if MMC_OMAP_HS && TI_COMMON_CMD_OPTIONS - default ENV_IS_NOWHERE - help - At present the environment can be stored in only one place. Use this - option to select the location. This is either a device (where the - environemnt information is simply written to a fixed location or - partition on the device) or a filesystem (where the environment - information is written to a file). - config ENV_IS_NOWHERE bool "Environment is not stored" + depends on !ENV_IS_IN_EEPROM + depends on !ENV_IS_IN_EXT4 + depends on !ENV_IS_IN_FAT + depends on !ENV_IS_IN_FLASH + depends on !ENV_IS_IN_MMC + depends on !ENV_IS_IN_NAND + depends on !ENV_IS_IN_NVRAM + depends on !ENV_IS_IN_ONENAND + depends on !ENV_IS_IN_REMOTE + depends on !ENV_IS_IN_SPI_FLASH + depends on !ENV_IS_IN_UBI + default y help Define this if you don't want to or can't have an environment stored - on a storage medium. In this case the environemnt will still exist + on a storage medium. In this case the environment will still exist while U-Boot is running, but once U-Boot exits it will not be stored. U-Boot will therefore always start up with a default environment. -config ENV_IS_IN_DATAFLASH - bool "Environment in dataflash" - depends on !CHAIN_OF_TRUST - help - Define this if you have a DataFlash memory device which you - want to use for the environment. - - - CONFIG_ENV_OFFSET: - - CONFIG_ENV_ADDR: - - CONFIG_ENV_SIZE: - - These three #defines specify the offset and size of the - environment area within the total memory of your DataFlash placed - at the specified address. - config ENV_IS_IN_EEPROM bool "Environment in EEPROM" depends on !CHAIN_OF_TRUST @@ -68,40 +34,10 @@ config ENV_IS_IN_EEPROM These two #defines specify the offset and size of the environment area within the total memory of your EEPROM. - - CONFIG_SYS_I2C_EEPROM_ADDR: - If defined, specified the chip address of the EEPROM device. - The default address is zero. - - - CONFIG_SYS_I2C_EEPROM_BUS: - If defined, specified the i2c bus of the EEPROM device. - - - CONFIG_SYS_EEPROM_PAGE_WRITE_BITS: - If defined, the number of bits used to address bytes in a - single page in the EEPROM device. A 64 byte page, for example - would require six bits. - - - CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS: - If defined, the number of milliseconds to delay between - page writes. The default is zero milliseconds. - - - CONFIG_SYS_I2C_EEPROM_ADDR_LEN: - The length in bytes of the EEPROM memory array address. Note - that this is NOT the chip address length! - - - CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW: - EEPROM chips that implement "address overflow" are ones - like Catalyst 24WC04/08/16 which has 9/10/11 bits of - address and the extra bits end up in the "chip address" bit - slots. This makes a 24WC08 (1Kbyte) chip look like four 256 - byte chips. - Note that we consider the length of the address field to still be one byte because the extra address bits are hidden in the chip address. - - CONFIG_SYS_EEPROM_SIZE: - The size in bytes of the EEPROM device. - - CONFIG_ENV_EEPROM_IS_ON_I2C define this, if you have I2C and SPI activated, and your EEPROM, which holds the environment, is on the I2C bus. @@ -119,16 +55,31 @@ config ENV_IS_IN_EEPROM config ENV_IS_IN_FAT bool "Environment is in a FAT filesystem" depends on !CHAIN_OF_TRUST + default y if ARCH_BCM283X + default y if ARCH_SUNXI && MMC + default y if MMC_OMAP_HS && TI_COMMON_CMD_OPTIONS + select FS_FAT select FAT_WRITE help Define this if you want to use the FAT file system for the environment. - - CONFIG_FAT_WRITE: - This must be enabled. Otherwise it cannot save the environment file. +config ENV_IS_IN_EXT4 + bool "Environment is in a EXT4 filesystem" + depends on !CHAIN_OF_TRUST + select EXT4_WRITE + help + Define this if you want to use the EXT4 file system for the environment. config ENV_IS_IN_FLASH bool "Environment in flash memory" depends on !CHAIN_OF_TRUST + default y if ARCH_CINTEGRATOR + default y if ARCH_INTEGRATOR_CP + default y if M548x || M547x || M5282 || MCF547x_8x + default y if MCF532x || MCF52x2 + default y if MPC86xx || MPC83xx + default y if ARCH_MPC8572 || ARCH_MPC8548 || ARCH_MPC8641 + default y if SH && !CPU_SH4 help Define this if you have a flash device which you want to use for the environment. @@ -201,6 +152,11 @@ config ENV_IS_IN_FLASH config ENV_IS_IN_MMC bool "Environment in an MMC device" depends on !CHAIN_OF_TRUST + depends on MMC + default y if ARCH_EXYNOS4 + default y if MX6SX || MX7D + default y if TEGRA30 || TEGRA124 + default y if TEGRA_ARMV8_COMMON help Define this if you have an MMC device which you want to use for the environment. @@ -321,7 +277,7 @@ config ENV_IS_IN_ONENAND provision. config ENV_IS_IN_REMOTE - bool "Environment is in remove memory space" + bool "Environment is in remote memory space" depends on !CHAIN_OF_TRUST help Define this if you have a remote memory space which you @@ -338,6 +294,13 @@ config ENV_IS_IN_REMOTE config ENV_IS_IN_SPI_FLASH bool "Environment is in SPI flash" depends on !CHAIN_OF_TRUST + default y if ARMADA_XP + default y if INTEL_BAYTRAIL + default y if INTEL_BRASWELL + default y if INTEL_BROADWELL + default y if NORTHBRIDGE_INTEL_IVYBRIDGE + default y if INTEL_QUARK + default y if INTEL_QUEENSBAY help Define this if you have a SPI Flash memory device which you want to use for the environment. @@ -397,17 +360,10 @@ config ENV_IS_IN_UBI the environment in. This will enable redundant environments in UBI. It is assumed that both volumes are in the same MTD partition. - - CONFIG_UBI_SILENCE_MSG - - CONFIG_UBIFS_SILENCE_MSG - - You will probably want to define these to avoid a really noisy system - when storing the env in UBI. - -endchoice - config ENV_FAT_INTERFACE string "Name of the block device for the environment" depends on ENV_IS_IN_FAT + default "mmc" if ARCH_SUNXI default "mmc" if TI_COMMON_CMD_OPTIONS || ARCH_ZYNQMP || ARCH_AT91 help Define this to a string that is the name of the block device. @@ -417,6 +373,8 @@ config ENV_FAT_DEVICE_AND_PART depends on ENV_IS_IN_FAT default "0:1" if TI_COMMON_CMD_OPTIONS default "0:auto" if ARCH_ZYNQMP + default "0:auto" if ARCH_SUNXI && MMC_SUNXI_SLOT_EXTRA = -1 + default "1:auto" if ARCH_SUNXI && MMC_SUNXI_SLOT_EXTRA != -1 default "0" if ARCH_AT91 help Define this to a string to specify the partition of the device. It can @@ -434,30 +392,74 @@ config ENV_FAT_DEVICE_AND_PART partition table then means device D. config ENV_FAT_FILE - string "Name of the FAT file to use for the environemnt" + string "Name of the FAT file to use for the environment" depends on ENV_IS_IN_FAT default "uboot.env" help It's a string of the FAT file name. This file use to store the environment. -if ARCH_SUNXI +config ENV_EXT4_INTERFACE + string "Name of the block device for the environment" + depends on ENV_IS_IN_EXT4 + help + Define this to a string that is the name of the block device. + +config ENV_EXT4_DEVICE_AND_PART + string "Device and partition for where to store the environemt in EXT4" + depends on ENV_IS_IN_EXT4 + help + Define this to a string to specify the partition of the device. It can + be as following: + + "D:P", "D:0", "D", "D:" or "D:auto" (D, P are integers. And P >= 1) + - "D:P": device D partition P. Error occurs if device D has no + partition table. + - "D:0": device D. + - "D" or "D:": device D partition 1 if device D has partition + table, or the whole device D if has no partition + table. + - "D:auto": first partition in device D with bootable flag set. + If none, first valid partition in device D. If no + partition table then means device D. + +config ENV_EXT4_FILE + string "Name of the EXT4 file to use for the environment" + depends on ENV_IS_IN_EXT4 + default "uboot.env" + help + It's a string of the EXT4 file name. This file use to store the + environment (explicit path to the file) + +if ARCH_ROCKCHIP || ARCH_SUNXI || ARCH_ZYNQ || ARCH_ZYNQMP config ENV_OFFSET hex "Environment Offset" depends on !ENV_IS_IN_UBI depends on !ENV_IS_NOWHERE + default 0x3f8000 if ARCH_ROCKCHIP default 0x88000 if ARCH_SUNXI + default 0xE0000 if ARCH_ZYNQ + default 0x1E00000 if ARCH_ZYNQMP help Offset from the start of the device (or partition) config ENV_SIZE hex "Environment Size" - depends on !ENV_IS_NOWHERE - default 0x20000 if ARCH_SUNXI + default 0x40000 if ENV_IS_IN_SPI_FLASH && ARCH_ZYNQMP + default 0x20000 if ARCH_SUNXI || ARCH_ZYNQ + default 0x8000 if ARCH_ROCKCHIP || ARCH_ZYNQMP help Size of the environment storage area +config ENV_SECT_SIZE + hex "Environment Sector-Size" + depends on !ENV_IS_NOWHERE && (ARCH_ZYNQ || ARCH_ZYNQMP) + default 0x40000 if ARCH_ZYNQMP + default 0x20000 if ARCH_ZYNQ + help + Size of the sector containing the environment. + config ENV_UBI_PART string "UBI partition name" depends on ENV_IS_IN_UBI @@ -472,4 +474,144 @@ config ENV_UBI_VOLUME endif +config USE_DEFAULT_ENV_FILE + bool "Create default environment from file" + help + Normally, the default environment is automatically generated + based on the settings of various CONFIG_* options, as well + as the CONFIG_EXTRA_ENV_SETTINGS. By selecting this option, + you can instead define the entire default environment in an + external file. + +config DEFAULT_ENV_FILE + string "Path to default environment file" + depends on USE_DEFAULT_ENV_FILE + help + The path containing the default environment. The format is + the same as accepted by the mkenvimage tool: lines + containing key=value pairs, blank lines and lines beginning + with # are ignored. + +config ENV_VARS_UBOOT_RUNTIME_CONFIG + bool "Add run-time information to the environment" + help + Enable this in order to add variables describing certain + run-time determined information about the hardware to the + environment. These will be named board_name, board_rev. + +if SPL_ENV_SUPPORT +config SPL_ENV_IS_NOWHERE + bool "SPL Environment is not stored" + default y if ENV_IS_NOWHERE + help + Similar to ENV_IS_NOWHERE, used for SPL environment. + +config SPL_ENV_IS_IN_MMC + bool "SPL Environment in an MMC device" + depends on !SPL_ENV_IS_NOWHERE + depends on ENV_IS_IN_MMC + default y + help + Similar to ENV_IS_IN_MMC, used for SPL environment. + +config SPL_ENV_IS_IN_FAT + bool "SPL Environment is in a FAT filesystem" + depends on !SPL_ENV_IS_NOWHERE + depends on ENV_IS_IN_FAT + default y + help + Similar to ENV_IS_IN_FAT, used for SPL environment. + +config SPL_ENV_IS_IN_EXT4 + bool "SPL Environment is in a EXT4 filesystem" + depends on !SPL_ENV_IS_NOWHERE + depends on ENV_IS_IN_EXT4 + default y + help + Similar to ENV_IS_IN_EXT4, used for SPL environment. + +config SPL_ENV_IS_IN_NAND + bool "SPL Environment in a NAND device" + depends on !SPL_ENV_IS_NOWHERE + depends on ENV_IS_IN_NAND + default y + help + Similar to ENV_IS_IN_NAND, used for SPL environment. + +config SPL_ENV_IS_IN_SPI_FLASH + bool "SPL Environment is in SPI flash" + depends on !SPL_ENV_IS_NOWHERE + depends on ENV_IS_IN_SPI_FLASH + default y + help + Similar to ENV_IS_IN_SPI_FLASH, used for SPL environment. + +config SPL_ENV_IS_IN_FLASH + bool "SPL Environment in flash memory" + depends on !SPL_ENV_IS_NOWHERE + depends on ENV_IS_IN_FLASH + default y + help + Similar to ENV_IS_IN_FLASH, used for SPL environment. + +endif + +if TPL_ENV_SUPPORT + +config TPL_ENV_IS_NOWHERE + bool "TPL Environment is not stored" + default y if ENV_IS_NOWHERE + help + Similar to ENV_IS_NOWHERE, used for TPL environment. + +config TPL_ENV_IS_IN_MMC + bool "TPL Environment in an MMC device" + depends on !TPL_ENV_IS_NOWHERE + depends on ENV_IS_IN_MMC + default y + help + Similar to ENV_IS_IN_MMC, used for TPL environment. + +config TPL_ENV_IS_IN_FAT + bool "TPL Environment is in a FAT filesystem" + depends on !TPL_ENV_IS_NOWHERE + depends on ENV_IS_IN_FAT + default y + help + Similar to ENV_IS_IN_FAT, used for TPL environment. + +config TPL_ENV_IS_IN_EXT4 + bool "TPL Environment is in a EXT4 filesystem" + depends on !TPL_ENV_IS_NOWHERE + depends on ENV_IS_IN_EXT4 + default y + help + Similar to ENV_IS_IN_EXT4, used for TPL environment. + +config TPL_ENV_IS_IN_NAND + bool "TPL Environment in a NAND device" + depends on !TPL_ENV_IS_NOWHERE + depends on ENV_IS_IN_NAND + default y + help + Similar to ENV_IS_IN_NAND, used for TPL environment. + +config TPL_ENV_IS_IN_SPI_FLASH + bool "TPL Environment is in SPI flash" + depends on !TPL_ENV_IS_NOWHERE + depends on ENV_IS_IN_SPI_FLASH + default y + help + Similar to ENV_IS_IN_SPI_FLASH, used for TPL environment. + +config TPL_ENV_IS_IN_FLASH + bool "TPL Environment in flash memory" + depends on !TPL_ENV_IS_NOWHERE + depends on ENV_IS_IN_FLASH + default y + help + Similar to ENV_IS_IN_FLASH, used for TPL environment. + +endif + endmenu