X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=drivers%2Fvideo%2Fanx9804.c;h=fc2f431b9c96285518e011dff5f1c7bf6a1b51e6;hb=25273dbd570541214ec6d687a4d6f3bfcdaa0441;hp=83d60d672dd6732f0758a56fe59e35042848b413;hpb=7c0e5d865ff0b86dfce492b656238919c659d756;p=oweals%2Fu-boot.git

diff --git a/drivers/video/anx9804.c b/drivers/video/anx9804.c
old mode 100755
new mode 100644
index 83d60d672d..fc2f431b9c
--- a/drivers/video/anx9804.c
+++ b/drivers/video/anx9804.c
@@ -1,7 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * (C) 2015 Hans de Goede <hdegoede@redhat.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 /*
@@ -12,63 +11,9 @@
 
 #include <common.h>
 #include <i2c.h>
+#include "anx98xx-edp.h"
 #include "anx9804.h"
 
-#define BIT(x) (1 << (x))
-
-/* Registers at i2c address 0x38 */
-
-#define ANX9804_HDCP_CONTROL_0_REG				0x01
-
-#define ANX9804_SYS_CTRL2_REG					0x81
-#define ANX9804_SYS_CTRL2_CHA_STA				0x04
-
-#define ANX9804_SYS_CTRL3_REG					0x82
-#define ANX9804_SYS_CTRL3_VALID_CTRL				BIT(0)
-#define ANX9804_SYS_CTRL3_F_VALID				BIT(1)
-#define ANX9804_SYS_CTRL3_HPD_CTRL				BIT(4)
-#define ANX9804_SYS_CTRL3_F_HPD					BIT(5)
-
-#define ANX9804_LINK_BW_SET_REG					0xa0
-#define ANX9804_LANE_COUNT_SET_REG				0xa1
-#define ANX9804_TRAINING_PTN_SET_REG				0xa2
-#define ANX9804_TRAINING_LANE0_SET_REG				0xa3
-#define ANX9804_TRAINING_LANE1_SET_REG				0xa4
-#define ANX9804_TRAINING_LANE2_SET_REG				0xa5
-#define ANX9804_TRAINING_LANE3_SET_REG				0xa6
-
-#define ANX9804_LINK_TRAINING_CTRL_REG				0xa8
-#define ANX9804_LINK_TRAINING_CTRL_EN				BIT(0)
-
-#define ANX9804_LINK_DEBUG_REG					0xb8
-#define ANX9804_PLL_CTRL_REG					0xc7	
-#define ANX9804_ANALOG_POWER_DOWN_REG				0xc8
-
-/* Registers at i2c address 0x39 */
-
-#define ANX9804_DEV_IDH_REG					0x03
-
-#define ANX9804_POWERD_CTRL_REG					0x05
-#define ANX9804_POWERD_AUDIO					BIT(4)
-
-#define ANX9804_RST_CTRL_REG					0x06
-
-#define ANX9804_RST_CTRL2_REG					0x07
-#define ANX9804_RST_CTRL2_AUX					BIT(2)
-#define ANX9804_RST_CTRL2_AC_MODE				BIT(6)
-
-#define ANX9804_VID_CTRL1_REG					0x08
-#define ANX9804_VID_CTRL1_VID_EN				BIT(7)
-#define ANX9804_VID_CTRL1_EDGE					BIT(0)
-
-#define ANX9804_VID_CTRL2_REG					0x09
-#define ANX9804_ANALOG_DEBUG_REG1				0xdc
-#define ANX9804_ANALOG_DEBUG_REG3				0xde
-#define ANX9804_PLL_FILTER_CTRL1				0xdf
-#define ANX9804_PLL_FILTER_CTRL3				0xe1
-#define ANX9804_PLL_FILTER_CTRL					0xe2
-#define ANX9804_PLL_CTRL3					0xe6
-
 /**
  * anx9804_init() - Init anx9804 parallel lcd to edp bridge chip
  *