X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=drivers%2Fsysreset%2FKconfig;h=4be7433404701d9943c50f202b43a593e330489d;hb=b9da77f1958aab4ec50ff2f095b40464ca2489dd;hp=8ce3e2e20761e55f25b924c97004fdf413a2383b;hpb=9dc8d155d4e88563f572ee79aab758eb4272f3fd;p=oweals%2Fu-boot.git

diff --git a/drivers/sysreset/Kconfig b/drivers/sysreset/Kconfig
index 8ce3e2e207..4be7433404 100644
--- a/drivers/sysreset/Kconfig
+++ b/drivers/sysreset/Kconfig
@@ -13,11 +13,39 @@ config SYSRESET
 	  to effect a reset. The uclass will try all available drivers when
 	  reset_walk() is called.
 
+config SPL_SYSRESET
+	bool "Enable support for system reset drivers in SPL mode"
+	depends on SYSRESET && SPL_DM
+	help
+	  Enable system reset drivers which can be used to reset the CPU or
+	  board. Each driver can provide a reset method which will be called
+	  to effect a reset. The uclass will try all available drivers when
+	  reset_walk() is called.
+
+config TPL_SYSRESET
+	bool "Enable support for system reset drivers in TPL mode"
+	depends on SYSRESET && TPL_DM
+	help
+	  Enable system reset drivers which can be used to reset the CPU or
+	  board. Each driver can provide a reset method which will be called
+	  to effect a reset. The uclass will try all available drivers when
+	  reset_walk() is called.
+
 if SYSRESET
 
+if CMD_POWEROFF
+
+config SYSRESET_CMD_POWEROFF
+	bool "sysreset implementation of the poweroff command"
+	help
+	  This should be selected by the appropriate PMIC driver if
+	  the poweroff command is enabled.
+
+endif
+
 config SYSRESET_GPIO
 	bool "Enable support for GPIO reset driver"
-	select GPIO
+	select DM_GPIO
 	help
 	  Reset support via GPIO pin connected reset logic. This is used for
 	  example on Microblaze where reset logic can be controlled via GPIO
@@ -32,10 +60,25 @@ config SYSRESET_MICROBLAZE
 config SYSRESET_PSCI
 	bool "Enable support for PSCI System Reset"
 	depends on ARM_PSCI_FW
+	select SPL_ARM_PSCI_FW if SPL
 	help
 	  Enable PSCI SYSTEM_RESET function call.  To use this, PSCI firmware
 	  must be running on your system.
 
+config SYSRESET_SOCFPGA
+	bool "Enable support for Intel SOCFPGA family"
+	depends on ARCH_SOCFPGA && (TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10)
+	help
+	  This enables the system reset driver support for Intel SOCFPGA SoCs
+	  (Cyclone 5, Arria 5 and Arria 10).
+
+config SYSRESET_SOCFPGA_S10
+	bool "Enable support for Intel SOCFPGA Stratix 10"
+	depends on ARCH_SOCFPGA && TARGET_SOCFPGA_STRATIX10
+	help
+	  This enables the system reset driver support for Intel SOCFPGA
+	  Stratix SoCs.
+
 config SYSRESET_TI_SCI
 	bool "TI System Control Interface (TI SCI) system reset driver"
 	depends on TI_SCI_PROTOCOL
@@ -58,13 +101,31 @@ config SYSRESET_WATCHDOG
 	help
 	  Reboot support for generic watchdog reset.
 
+config SYSRESET_RESETCTL
+	bool "Enable support for reset controller reboot driver"
+	select DM_RESET
+	help
+	  Reboot support using generic reset controller.
+
 config SYSRESET_X86
 	bool "Enable support for x86 processor reboot driver"
 	depends on X86
 	help
 	  Reboot support for generic x86 processor reset.
 
-config SYSRESET_MCP83XX
+config SYSRESET_SPL_X86
+	bool "Enable support for x86 processor reboot driver in SPL"
+	depends on X86
+	help
+	  Reboot support for generic x86 processor reset in SPL.
+
+config SYSRESET_TPL_X86
+	bool "Enable support for x86 processor reboot driver in TPL"
+	depends on X86
+	help
+	  Reboot support for generic x86 processor reset in TPL.
+
+config SYSRESET_MPC83XX
 	bool "Enable support MPC83xx SoC family reboot driver"
 	help
 	  Reboot support for NXP MPC83xx SoCs.