X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=drivers%2Fspi%2FKconfig;h=88da9a4c8e7159b7be04e701a35708460dd9044d;hb=7155cd2e6e7824ab60fbfc755d546d45b1d15e7b;hp=aca385d5e59f69367fb62e5fca00e708a436b6bc;hpb=2372b0012925f9100980151f4a28347c82feaba8;p=oweals%2Fu-boot.git

diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index aca385d5e5..88da9a4c8e 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -32,6 +32,14 @@ config ATH79_SPI
 	  uses driver model and requires a device tree binding to operate.
 	  please refer to doc/device-tree-bindings/spi/spi-ath79.txt.
 
+config ATMEL_SPI
+	bool "Atmel SPI driver"
+	depends on ARCH_AT91
+	help
+	  This enables driver for the Atmel SPI Controller, present on
+	  many AT91 (ARM) chips. This driver can be used to access
+	  the SPI Flash, such as AT25DF321.
+
 config CADENCE_QSPI
 	bool "Cadence QSPI driver"
 	help
@@ -61,13 +69,6 @@ config FSL_DSPI
 	  this Freescale DSPI IP core. LS102xA and Colibri VF50/VF61 platforms
 	  use this driver.
 
-config FSL_QSPI
-	bool "Freescale QSPI driver"
-	help
-	  Enable the Freescale Quad-SPI (QSPI) driver. This driver can be
-	  used to access the SPI NOR flash on platforms embedding this
-	  Freescale IP core.
-
 config ICH_SPI
 	bool "Intel ICH SPI driver"
 	help
@@ -75,6 +76,13 @@ config ICH_SPI
 	  access the SPI NOR flash on platforms embedding this Intel
 	  ICH IP core.
 
+config MVEBU_A3700_SPI
+	bool "Marvell Armada 3700 SPI driver"
+	help
+	  Enable the Marvell Armada 3700 SPI driver. This driver can be
+	  used to access the SPI NOR flash on platforms embedding this
+	  Marvell IP core.
+
 config PIC32_SPI
 	bool "Microchip PIC32 SPI driver"
 	depends on MACH_PIC32
@@ -116,6 +124,14 @@ config SANDBOX_SPI
 		};
 	  };
 
+config STM32_QSPI
+	bool "STM32F7 QSPI driver"
+	depends on STM32F7
+	help
+	  Enable the STM32F7 Quad-SPI (QSPI) driver. This driver can be
+	  used to access the SPI NOR flash chips on platforms embedding
+	  this ST IP core.
+
 config TEGRA114_SPI
 	bool "nVidia Tegra114 SPI driver"
 	help
@@ -172,15 +188,14 @@ config ZYNQ_QSPI
 	  Zynq QSPI IP core. This IP is used to connect the flash in
 	  4-bit qspi, 8-bit dual stacked and shared 4-bit dual parallel.
 
-config OMAP3_SPI
-	bool "McSPI driver for OMAP"
-	help
-	  SPI master controller for OMAP24XX and later Multichannel SPI
-	  (McSPI). This driver be used to access SPI chips on platforms
-	  embedding this OMAP3 McSPI IP core.
-
 endif # if DM_SPI
 
+config SOFT_SPI
+	bool "Soft SPI driver"
+	help
+	 Enable Soft SPI driver. This driver is to use GPIO simulate
+	 the SPI protocol.
+
 config FSL_ESPI
 	bool "Freescale eSPI driver"
 	help
@@ -188,10 +203,37 @@ config FSL_ESPI
 	  access the SPI interface and SPI NOR flash on platforms embedding
 	  this Freescale eSPI IP core.
 
+config FSL_QSPI
+	bool "Freescale QSPI driver"
+	help
+	  Enable the Freescale Quad-SPI (QSPI) driver. This driver can be
+	  used to access the SPI NOR flash on platforms embedding this
+	  Freescale IP core.
+
+config NDS_AE3XX_SPI
+	bool "Andestech AE3XX SPI driver"
+	help
+	  Enable the Andestech AE3XX SPI driver. This driver can be
+	  used to access the SPI flash on platforms embedding this
+	  Andestech IP core.
+
 config TI_QSPI
 	bool "TI QSPI driver"
 	help
 	  Enable the TI Quad-SPI (QSPI) driver for DRA7xx and AM43xx evms.
 	  This driver support spi flash single, quad and memory reads.
 
+config MPC8XX_SPI
+	bool "MPC8XX SPI Driver"
+	depends on 8xx
+	help
+	  Enable support for SPI on MPC8XX
+
+config OMAP3_SPI
+	bool "McSPI driver for OMAP"
+	help
+	  SPI master controller for OMAP24XX and later Multichannel SPI
+	  (McSPI). This driver be used to access SPI chips on platforms
+	  embedding this OMAP3 McSPI IP core.
+
 endmenu # menu "SPI Support"