X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=drivers%2Fserial%2Fserial_zynq.c;h=4e86e5c2a1abef1a0d449b67d5a5af27e0d3b301;hb=e2351d5cf1e97408b4c52bafeaa85e0ca85c920c;hp=e79d997cbab722580f2c8c2876a7f518577a1f41;hpb=842efb3a930aac48b471573dfe380d7bffbbc3f0;p=oweals%2Fu-boot.git

diff --git a/drivers/serial/serial_zynq.c b/drivers/serial/serial_zynq.c
index e79d997cba..4e86e5c2a1 100644
--- a/drivers/serial/serial_zynq.c
+++ b/drivers/serial/serial_zynq.c
@@ -5,6 +5,7 @@
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
+#include <clk.h>
 #include <common.h>
 #include <debug_uart.h>
 #include <dm.h>
@@ -14,12 +15,11 @@
 #include <asm/io.h>
 #include <linux/compiler.h>
 #include <serial.h>
-#include <asm/arch/clk.h>
 #include <asm/arch/hardware.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#define ZYNQ_UART_SR_TXFULL	0x00000010 /* TX FIFO full */
+#define ZYNQ_UART_SR_TXEMPTY	(1 << 3) /* TX FIFO empty */
 #define ZYNQ_UART_SR_TXACTIVE	(1 << 11)  /* TX active */
 #define ZYNQ_UART_SR_RXEMPTY	0x00000002 /* RX FIFO empty */
 
@@ -97,7 +97,7 @@ static void _uart_zynq_serial_init(struct uart_zynq *regs)
 
 static int _uart_zynq_serial_putc(struct uart_zynq *regs, const char c)
 {
-	if (readl(&regs->channel_sts) & ZYNQ_UART_SR_TXFULL)
+	if (!(readl(&regs->channel_sts) & ZYNQ_UART_SR_TXEMPTY))
 		return -EAGAIN;
 
 	writel(c, &regs->tx_rx_fifo);
@@ -108,7 +108,29 @@ static int _uart_zynq_serial_putc(struct uart_zynq *regs, const char c)
 int zynq_serial_setbrg(struct udevice *dev, int baudrate)
 {
 	struct zynq_uart_priv *priv = dev_get_priv(dev);
-	unsigned long clock = get_uart_clk(0);
+	unsigned long clock;
+
+	int ret;
+	struct clk clk;
+
+	ret = clk_get_by_index(dev, 0, &clk);
+	if (ret < 0) {
+		dev_err(dev, "failed to get clock\n");
+		return ret;
+	}
+
+	clock = clk_get_rate(&clk);
+	if (IS_ERR_VALUE(clock)) {
+		dev_err(dev, "failed to get rate\n");
+		return clock;
+	}
+	debug("%s: CLK %ld\n", __func__, clock);
+
+	ret = clk_enable(&clk);
+	if (ret && ret != -ENOSYS) {
+		dev_err(dev, "failed to enable clock\n");
+		return ret;
+	}
 
 	_uart_zynq_serial_setbrg(priv->regs, clock, baudrate);
 
@@ -157,7 +179,7 @@ static int zynq_serial_ofdata_to_platdata(struct udevice *dev)
 {
 	struct zynq_uart_priv *priv = dev_get_priv(dev);
 
-	priv->regs = (struct uart_zynq *)dev_get_addr(dev);
+	priv->regs = (struct uart_zynq *)devfdt_get_addr(dev);
 
 	return 0;
 }