X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=drivers%2Fqe%2Fuec_phy.h;h=83a7ccd98197947a8dcb5e9af12fa947ba55b8a4;hb=a38c3af868ad2a7a7c04667e559570d5f81b1d51;hp=7ac1ff932950cb2335cde0576a1ae91d9f069a71;hpb=cb5473205206c7f14cbb1e747f28ec75b48826e2;p=oweals%2Fu-boot.git

diff --git a/drivers/qe/uec_phy.h b/drivers/qe/uec_phy.h
index 7ac1ff9329..83a7ccd981 100644
--- a/drivers/qe/uec_phy.h
+++ b/drivers/qe/uec_phy.h
@@ -1,17 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * Copyright (C) 2005 Freescale Semiconductor, Inc.
+ * Copyright (C) 2005, 2011 Freescale Semiconductor, Inc.
  *
  * Author: Shlomi Gridish <gridish@freescale.com>
  *
  * Description: UCC ethernet driver -- PHY handling
  *		Driver for UEC on QE
  *		Based on 8260_io/fcc_enet.c
- *
- * This program is free software; you can redistribute	it and/or modify it
- * under  the terms of	the GNU General	 Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
  */
 #ifndef __UEC_PHY_H__
 #define __UEC_PHY_H__
@@ -24,16 +19,6 @@
 
 #define UGETH_AN_TIMEOUT	2000
 
-/* 1000BT control (Marvell & BCM54xx at least) */
-#define MII_1000BASETCONTROL		      0x09
-#define MII_1000BASETCONTROL_FULLDUPLEXCAP    0x0200
-#define MII_1000BASETCONTROL_HALFDUPLEXCAP    0x0100
-
-/* 1000BT status */
-#define MII_1000BASETSTATUS	0x0a
-#define LPA_1000FULL		0x0400
-#define LPA_1000HALF		0x0200
-
 /* Cicada Extended Control Register 1 */
 #define MII_CIS8201_EXT_CON1	    0x17
 #define MII_CIS8201_EXTCON1_INIT    0x0000
@@ -169,24 +154,6 @@
 #define ADVERTISED_BNC			(1 << 11)
 #define ADVERTISED_10000baseT_Full	(1 << 12)
 
-/* Advertisement control register. */
-#define ADVERTISE_SLCT		0x001f	/* Selector bits	       */
-#define ADVERTISE_CSMA		0x0001	/* Only selector supported     */
-#define ADVERTISE_10HALF	0x0020	/* Try for 10mbps half-duplex  */
-#define ADVERTISE_10FULL	0x0040	/* Try for 10mbps full-duplex  */
-#define ADVERTISE_100HALF	0x0080	/* Try for 100mbps half-duplex */
-#define ADVERTISE_100FULL	0x0100	/* Try for 100mbps full-duplex */
-#define ADVERTISE_100BASE4	0x0200	/* Try for 100mbps 4k packets  */
-#define ADVERTISE_RESV		0x1c00	/* Unused...		       */
-#define ADVERTISE_RFAULT	0x2000	/* Say we can detect faults    */
-#define ADVERTISE_LPACK		0x4000	/* Ack link partners response  */
-#define ADVERTISE_NPAGE		0x8000	/* Next page bit	       */
-
-#define ADVERTISE_FULL (ADVERTISE_100FULL | ADVERTISE_10FULL | \
-			ADVERTISE_CSMA)
-#define ADVERTISE_ALL (ADVERTISE_10HALF | ADVERTISE_10FULL | \
-		       ADVERTISE_100HALF | ADVERTISE_100FULL)
-
 /* Taken from mii_if_info and sungem_phy.h */
 struct uec_mii_info {
 	/* Information about the PHY type */