X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=drivers%2Fpower%2Fpmic%2FKconfig;h=e3f9e4dfc0deedf1cc243b5813c97717337fad24;hb=470135be276b2d92c6da464c68839202d4ff0d08;hp=fb29843a5a12c9fa2d19aafc6777b16202faefad;hpb=ed02c532be690b3d0c3e15c81531785a788fd949;p=oweals%2Fu-boot.git

diff --git a/drivers/power/pmic/Kconfig b/drivers/power/pmic/Kconfig
index fb29843a5a..e3f9e4dfc0 100644
--- a/drivers/power/pmic/Kconfig
+++ b/drivers/power/pmic/Kconfig
@@ -10,6 +10,27 @@ config DM_PMIC
 	- 'drivers/power/pmic/pmic-uclass.c'
 	- 'include/power/pmic.h'
 
+config PMIC_CHILDREN
+	bool "Allow child devices for PMICs"
+	depends on DM_PMIC
+	default y
+	---help---
+	This allows PMICs to support child devices (such as regulators) in
+	SPL. This adds quite a bit of code so if you are not using this
+	feature you can turn it off. Most likely you should turn it on for
+	U-Boot proper.
+
+config SPL_PMIC_CHILDREN
+	bool "Allow child devices for PMICs in SPL"
+	depends on DM_PMIC
+	default y
+	---help---
+	This allows PMICs to support child devices (such as regulators) in
+	SPL. This adds quite a bit of code so if you are not using this
+	feature you can turn it off. In this case you may need a 'back door'
+	to call your regulator code (e.g. see rk8xx.c for direct functions
+	for use in SPL).
+
 config PMIC_ACT8846
 	bool "Enable support for the active-semi 8846 PMIC"
 	depends on DM_PMIC && DM_I2C
@@ -19,6 +40,14 @@ config PMIC_ACT8846
 	functions. It uses an I2C interface and is designed for use with
 	tablets and smartphones.
 
+config PMIC_AS3722
+	bool "Enable support for the Austria Micro Systems (AMS) AS7322 PMIC"
+	help
+	  The AS3722 includes 7 DC/DC buck convertors, 11 low-noise LDOs, a
+	  real-time clock, GPIOs, ADC and a few other features. It uses an I2C
+	  interface and is designs to cover most of the power managementment
+	  required for a tablets or laptop.
+
 config DM_PMIC_PFUZE100
 	bool "Enable Driver Model for PMIC PFUZE100"
 	depends on DM_PMIC
@@ -33,6 +62,53 @@ config DM_PMIC_MAX77686
 	This config enables implementation of driver-model pmic uclass features
 	for PMIC MAX77686. The driver implements read/write operations.
 
+config DM_PMIC_MAX8998
+	bool "Enable Driver Model for PMIC MAX8998"
+	depends on DM_PMIC
+	---help---
+	This config enables implementation of driver-model pmic uclass features
+	for PMIC MAX8998. The driver implements read/write operations.
+
+config PMIC_MAX8997
+	bool "Enable Driver Model for PMIC MAX8997"
+	depends on DM_PMIC
+	---help---
+	This config enables implementation of driver-model pmic uclass features
+	for PMIC MAX8997. The driver implements read/write operations.
+	This is a Power Management IC with RTC, Fuel Gauge, MUIC control on Chip.
+	- 21x LDOs
+	- 12x GPIOs
+	- Haptic Motor driver
+	- RTC with two alarms
+	- Fueal Gauge and One backup battery charger
+	- MUIC
+	- Others
+
+config PMIC_PM8916
+	bool "Enable Driver Model for Qualcomm PM8916 PMIC"
+	depends on DM_PMIC
+	---help---
+	The PM8916 is a PMIC connected to one (or several) processors
+	with SPMI bus. It has 2 slaves with several peripherals:
+	- 18x LDO
+	- 4x GPIO
+	- Power and Reset buttons
+	- Watchdog
+	- RTC
+	- Vibrator drivers
+	- Others
+
+	Driver binding info: doc/device-tree-bindings/pmic/pm8916.txt
+
+config PMIC_RK8XX
+	bool "Enable support for Rockchip PMIC RK8XX"
+	depends on DM_PMIC
+	---help---
+	The Rockchip RK808 PMIC provides four buck DC-DC convertors, 8 LDOs,
+	an RTC and two low Rds (resistance (drain to source)) switches. It is
+	accessed via an I2C interface. The device is used with Rockchip SoCs.
+	This driver implements register read/write operations.
+
 config PMIC_S2MPS11
 	bool "Enable Driver Model for PMIC Samsung S2MPS11"
 	depends on DM_PMIC
@@ -81,6 +157,14 @@ config PMIC_S5M8767
 	driver provides basic register access and sets up the attached
 	regulators if regulator support is enabled.
 
+config PMIC_RN5T567
+	bool "Enable driver for Ricoh RN5T567 PMIC"
+	depends on DM_PMIC
+	---help---
+	The RN5T567 is a PMIC with 4 step-down DC/DC converters, 5 LDO
+	regulators Real-Time Clock and 4 GPIOs. This driver provides
+	register access only.
+
 config PMIC_TPS65090
 	bool "Enable driver for Texas Instruments TPS65090 PMIC"
 	depends on DM_PMIC
@@ -89,3 +173,31 @@ config PMIC_TPS65090
 	FETs and a battery charger. This driver provides register access
 	only, and you can enable the regulator/charger drivers separately if
 	required.
+
+config PMIC_PALMAS
+	bool "Enable driver for Texas Instruments PALMAS PMIC"
+	depends on DM_PMIC
+	---help---
+	The PALMAS is a PMIC containing several LDOs, SMPS.
+	This driver binds the pmic children.
+
+config PMIC_LP873X
+	bool "Enable driver for Texas Instruments LP873X PMIC"
+	depends on DM_PMIC
+	---help---
+	The LP873X is a PMIC containing couple of LDOs and couple of SMPS.
+	This driver binds the pmic children.
+
+config PMIC_LP87565
+	bool "Enable driver for Texas Instruments LP87565 PMIC"
+	depends on DM_PMIC
+	---help---
+	The LP87565 is a PMIC containing a bunch of SMPS.
+	This driver binds the pmic children.
+
+config POWER_MC34VR500
+	bool "Enable driver for Freescale MC34VR500 PMIC"
+	---help---
+	The MC34VR500 is used in conjunction with the FSL T1 and LS1 series
+	SoC. It provides 4 buck DC-DC convertors and 5 LDOs, and it is accessed
+	via an I2C interface.