X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=drivers%2Fnet%2Fphy%2Fmarvell.c;h=eab15585c31a9d160b9fb05f4e783474821db438;hb=e6e3faa5c2da591cd3e0f2047a74cfc832e7b738;hp=8397e32e1a0f8dccecfb1c3e1f10d21103e344dc;hpb=fbbbc86e8ebac4f42f4ca39ceba80cea27c983bc;p=oweals%2Fu-boot.git

diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 8397e32e1a..eab15585c3 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -1,24 +1,10 @@
 /*
  * Marvell PHY drivers
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  *
  * Copyright 2010-2011 Freescale Semiconductor, Inc.
  * author Andy Fleming
- *
  */
 #include <config.h>
 #include <common.h>
@@ -290,6 +276,85 @@ static int m88e1111s_config(struct phy_device *phydev)
 	return 0;
 }
 
+/**
+ * m88e1518_phy_writebits - write bits to a register
+ */
+void m88e1518_phy_writebits(struct phy_device *phydev,
+		   u8 reg_num, u16 offset, u16 len, u16 data)
+{
+	u16 reg, mask;
+
+	if ((len + offset) >= 16)
+		mask = 0 - (1 << offset);
+	else
+		mask = (1 << (len + offset)) - (1 << offset);
+
+	reg = phy_read(phydev, MDIO_DEVAD_NONE, reg_num);
+
+	reg &= ~mask;
+	reg |= data << offset;
+
+	phy_write(phydev, MDIO_DEVAD_NONE, reg_num, reg);
+}
+
+static int m88e1518_config(struct phy_device *phydev)
+{
+	/*
+	 * As per Marvell Release Notes - Alaska 88E1510/88E1518/88E1512
+	 * /88E1514 Rev A0, Errata Section 3.1
+	 */
+
+	/* EEE initialization */
+	phy_write(phydev, MDIO_DEVAD_NONE, 22, 0x00ff);
+	phy_write(phydev, MDIO_DEVAD_NONE, 17, 0x214B);
+	phy_write(phydev, MDIO_DEVAD_NONE, 16, 0x2144);
+	phy_write(phydev, MDIO_DEVAD_NONE, 17, 0x0C28);
+	phy_write(phydev, MDIO_DEVAD_NONE, 16, 0x2146);
+	phy_write(phydev, MDIO_DEVAD_NONE, 17, 0xB233);
+	phy_write(phydev, MDIO_DEVAD_NONE, 16, 0x214D);
+	phy_write(phydev, MDIO_DEVAD_NONE, 17, 0xCC0C);
+	phy_write(phydev, MDIO_DEVAD_NONE, 16, 0x2159);
+	phy_write(phydev, MDIO_DEVAD_NONE, 22, 0x0000);
+
+	/* SGMII-to-Copper mode initialization */
+	if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
+		/* Select page 18 */
+		phy_write(phydev, MDIO_DEVAD_NONE, 22, 18);
+
+		/* In reg 20, write MODE[2:0] = 0x1 (SGMII to Copper) */
+		m88e1518_phy_writebits(phydev, 20, 0, 3, 1);
+
+		/* PHY reset is necessary after changing MODE[2:0] */
+		m88e1518_phy_writebits(phydev, 20, 15, 1, 1);
+
+		/* Reset page selection */
+		phy_write(phydev, MDIO_DEVAD_NONE, 22, 0);
+
+		udelay(100);
+	}
+
+	return m88e1111s_config(phydev);
+}
+
+/* Marvell 88E1510 */
+static int m88e1510_config(struct phy_device *phydev)
+{
+	/* Select page 3 */
+	phy_write(phydev, MDIO_DEVAD_NONE, 22, 3);
+
+	/* Enable INTn output on LED[2] */
+	m88e1518_phy_writebits(phydev, 18, 7, 1, 1);
+
+	/* Configure LEDs */
+	m88e1518_phy_writebits(phydev, 16, 0, 4, 3); /* LED[0]:0011 (ACT) */
+	m88e1518_phy_writebits(phydev, 16, 4, 4, 6); /* LED[1]:0110 (LINK) */
+
+	/* Reset page selection */
+	phy_write(phydev, MDIO_DEVAD_NONE, 22, 0);
+
+	return m88e1518_config(phydev);
+}
+
 /* Marvell 88E1118 */
 static int m88e1118_config(struct phy_device *phydev)
 {
@@ -502,12 +567,22 @@ static struct phy_driver M88E1149S_driver = {
 	.shutdown = &genphy_shutdown,
 };
 
+static struct phy_driver M88E1510_driver = {
+	.name = "Marvell 88E1510",
+	.uid = 0x1410dd0,
+	.mask = 0xffffff0,
+	.features = PHY_GBIT_FEATURES,
+	.config = &m88e1510_config,
+	.startup = &m88e1011s_startup,
+	.shutdown = &genphy_shutdown,
+};
+
 static struct phy_driver M88E1518_driver = {
 	.name = "Marvell 88E1518",
 	.uid = 0x1410dd1,
 	.mask = 0xffffff0,
 	.features = PHY_GBIT_FEATURES,
-	.config = &m88e1111s_config,
+	.config = &m88e1518_config,
 	.startup = &m88e1011s_startup,
 	.shutdown = &genphy_shutdown,
 };
@@ -532,6 +607,7 @@ int phy_marvell_init(void)
 	phy_register(&M88E1118R_driver);
 	phy_register(&M88E1111S_driver);
 	phy_register(&M88E1011S_driver);
+	phy_register(&M88E1510_driver);
 	phy_register(&M88E1518_driver);
 
 	return 0;