X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=drivers%2Fnet%2Fphy%2Fbroadcom.c;h=e4afa90dca02e7c6c620f9dfbeaa56c16322ec83;hb=e1541b1d7fb94ed9ac2bfe4c324afd91d77aee11;hp=427ac6013baeeff557063bbf7b376b5e82a9b976;hpb=9082eeac5de1335d663016668c9b89c290f5c79b;p=oweals%2Fu-boot.git

diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index 427ac6013b..e4afa90dca 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -1,24 +1,10 @@
 /*
  * Broadcom PHY drivers
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  *
  * Copyright 2010-2011 Freescale Semiconductor, Inc.
  * author Andy Fleming
- *
  */
 #include <config.h>
 #include <common.h>
@@ -44,6 +30,29 @@
 #define MIIM_BCM54XX_EXP_SEL_SSD	0x0e00	/* Secondary SerDes select */
 #define MIIM_BCM54XX_EXP_SEL_ER		0x0f00	/* Expansion register select */
 
+#define MIIM_BCM_AUXCNTL_SHDWSEL_MISC	0x0007
+#define MIIM_BCM_AUXCNTL_ACTL_SMDSP_EN	0x0800
+
+#define MIIM_BCM_CHANNEL_WIDTH    0x2000
+
+static void bcm_phy_write_misc(struct phy_device *phydev,
+			       u16 reg, u16 chl, u16 value)
+{
+	int reg_val;
+
+	phy_write(phydev, MDIO_DEVAD_NONE, MIIM_BCM54xx_AUXCNTL,
+		  MIIM_BCM_AUXCNTL_SHDWSEL_MISC);
+
+	reg_val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_BCM54xx_AUXCNTL);
+	reg_val |= MIIM_BCM_AUXCNTL_ACTL_SMDSP_EN;
+	phy_write(phydev, MDIO_DEVAD_NONE, MIIM_BCM54xx_AUXCNTL, reg_val);
+
+	reg_val = (chl * MIIM_BCM_CHANNEL_WIDTH) | reg;
+	phy_write(phydev, MDIO_DEVAD_NONE, MIIM_BCM54XX_EXP_SEL, reg_val);
+
+	phy_write(phydev, MDIO_DEVAD_NONE, MIIM_BCM54XX_EXP_DATA, value);
+}
+
 /* Broadcom BCM5461S */
 static int bcm5461_config(struct phy_device *phydev)
 {
@@ -98,11 +107,14 @@ static int bcm54xx_parse_status(struct phy_device *phydev)
 
 static int bcm54xx_startup(struct phy_device *phydev)
 {
+	int ret;
+
 	/* Read the Status (2x to make sure link is right) */
-	genphy_update_link(phydev);
-	bcm54xx_parse_status(phydev);
+	ret = genphy_update_link(phydev);
+	if (ret)
+		return ret;
 
-	return 0;
+	return bcm54xx_parse_status(phydev);
 }
 
 /* Broadcom BCM5482S */
@@ -151,6 +163,66 @@ static int bcm5482_config(struct phy_device *phydev)
 	return 0;
 }
 
+static int bcm_cygnus_startup(struct phy_device *phydev)
+{
+	int ret;
+
+	/* Read the Status (2x to make sure link is right) */
+	ret = genphy_update_link(phydev);
+	if (ret)
+		return ret;
+
+	return genphy_parse_link(phydev);
+}
+
+static void bcm_cygnus_afe(struct phy_device *phydev)
+{
+	/* ensures smdspclk is enabled */
+	phy_write(phydev, MDIO_DEVAD_NONE, MIIM_BCM54xx_AUXCNTL, 0x0c30);
+
+	/* AFE_VDAC_ICTRL_0 bit 7:4 Iq=1100 for 1g 10bt, normal modes */
+	bcm_phy_write_misc(phydev, 0x39, 0x01, 0xA7C8);
+
+	/* AFE_HPF_TRIM_OTHERS bit11=1, short cascode for all modes*/
+	bcm_phy_write_misc(phydev, 0x3A, 0x00, 0x0803);
+
+	/* AFE_TX_CONFIG_1 bit 7:4 Iq=1100 for test modes */
+	bcm_phy_write_misc(phydev, 0x3A, 0x01, 0xA740);
+
+	/* AFE TEMPSEN_OTHERS rcal_HT, rcal_LT 10000 */
+	bcm_phy_write_misc(phydev, 0x3A, 0x03, 0x8400);
+
+	/* AFE_FUTURE_RSV bit 2:0 rccal <2:0>=100 */
+	bcm_phy_write_misc(phydev, 0x3B, 0x00, 0x0004);
+
+	/* Adjust bias current trim to overcome digital offSet */
+	phy_write(phydev, MDIO_DEVAD_NONE, 0x1E, 0x02);
+
+	/* make rcal=100, since rdb default is 000 */
+	phy_write(phydev, MDIO_DEVAD_NONE, 0x17, 0x00B1);
+	phy_write(phydev, MDIO_DEVAD_NONE, 0x15, 0x0010);
+
+	/* CORE_EXPB0, Reset R_CAL/RC_CAL Engine */
+	phy_write(phydev, MDIO_DEVAD_NONE, 0x17, 0x00B0);
+	phy_write(phydev, MDIO_DEVAD_NONE, 0x15, 0x0010);
+
+	/* CORE_EXPB0, Disable Reset R_CAL/RC_CAL Engine */
+	phy_write(phydev, MDIO_DEVAD_NONE, 0x17, 0x00B0);
+	phy_write(phydev, MDIO_DEVAD_NONE, 0x15, 0x0000);
+}
+
+static int bcm_cygnus_config(struct phy_device *phydev)
+{
+	genphy_config_aneg(phydev);
+	phy_reset(phydev);
+	/* AFE settings for PHY stability */
+	bcm_cygnus_afe(phydev);
+	/* Forcing aneg after applying the AFE settings */
+	genphy_restart_aneg(phydev);
+
+	return 0;
+}
+
 /*
  * Find out if PHY is in copper or serdes mode by looking at Expansion Reg
  * 0x42 - "Operating Mode Status Register"
@@ -235,17 +307,21 @@ static u32 bcm5482_parse_serdes_sr(struct phy_device *phydev)
  */
 static int bcm5482_startup(struct phy_device *phydev)
 {
+	int ret;
+
 	if (bcm5482_is_serdes(phydev)) {
 		bcm5482_parse_serdes_sr(phydev);
 		phydev->port = PORT_FIBRE;
-	} else {
-		/* Wait for auto-negotiation to complete or fail */
-		genphy_update_link(phydev);
-		/* Parse BCM54xx copper aux status register */
-		bcm54xx_parse_status(phydev);
+		return 0;
 	}
 
-	return 0;
+	/* Wait for auto-negotiation to complete or fail */
+	ret = genphy_update_link(phydev);
+	if (ret)
+		return ret;
+
+	/* Parse BCM54xx copper aux status register */
+	return bcm54xx_parse_status(phydev);
 }
 
 static struct phy_driver BCM5461S_driver = {
@@ -278,11 +354,22 @@ static struct phy_driver BCM5482S_driver = {
 	.shutdown = &genphy_shutdown,
 };
 
+static struct phy_driver BCM_CYGNUS_driver = {
+	.name = "Broadcom CYGNUS GPHY",
+	.uid = 0xae025200,
+	.mask = 0xfffff0,
+	.features = PHY_GBIT_FEATURES,
+	.config = &bcm_cygnus_config,
+	.startup = &bcm_cygnus_startup,
+	.shutdown = &genphy_shutdown,
+};
+
 int phy_broadcom_init(void)
 {
 	phy_register(&BCM5482S_driver);
 	phy_register(&BCM5464S_driver);
 	phy_register(&BCM5461S_driver);
+	phy_register(&BCM_CYGNUS_driver);
 
 	return 0;
 }