X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=drivers%2Fnet%2Fphy%2FKconfig;h=3dc0822d9c21cfa83591be5791fcdd7a5066a7c6;hb=522e035441ca04d99de2fc13b614ad896691e9c9;hp=1afd8097b2fa7d8bcafbb30b16190c3e4e061bff;hpb=449ea2cd0d0c4e46c5b2b21480f34523dd928e33;p=oweals%2Fu-boot.git

diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 1afd8097b2..3dc0822d9c 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -7,11 +7,44 @@ config MV88E6352_SWITCH
 
 menuconfig PHYLIB
 	bool "Ethernet PHY (physical media interface) support"
+	depends on NET
 	help
 	  Enable Ethernet PHY (physical media interface) support.
 
 if PHYLIB
 
+config PHY_ADDR_ENABLE
+	bool "Limit phy address"
+	default y if ARCH_SUNXI
+	help
+	  Select this if you want to control which phy address is used
+
+if PHY_ADDR_ENABLE
+config PHY_ADDR
+	int "PHY address"
+	default 1 if ARCH_SUNXI
+	default 0
+	help
+	  The address of PHY on MII bus. Usually in range of 0 to 31.
+endif
+
+config B53_SWITCH
+	bool "Broadcom BCM53xx (RoboSwitch) Ethernet switch PHY support."
+	help
+	  Enable support for Broadcom BCM53xx (RoboSwitch) Ethernet switches.
+	  This currently supports BCM53125 and similar models.
+
+if B53_SWITCH
+
+config B53_CPU_PORT
+	int "CPU port"
+	default 8
+
+config B53_PHY_PORTS
+	hex "Bitmask of PHY ports"
+
+endif # B53_SWITCH
+
 config MV88E61XX_SWITCH
 	bool "Marvel MV88E61xx Ethernet switch PHY support."
 
@@ -31,8 +64,32 @@ endif # MV88E61XX_SWITCH
 config PHYLIB_10G
 	bool "Generic 10G PHY support"
 
-config PHY_AQUANTIA
+menuconfig PHY_AQUANTIA
 	bool "Aquantia Ethernet PHYs support"
+	select PHY_GIGE
+	select PHYLIB_10G
+
+config PHY_AQUANTIA_UPLOAD_FW
+	bool "Aquantia firmware loading support"
+	default n
+	depends on PHY_AQUANTIA
+	help
+		Aquantia PHYs use firmware which can be either loaded automatically
+		from storage directly attached to the phy or loaded by the boot loader
+		via MDIO commands.  The firmware is loaded from a file, specified by
+		the PHY_AQUANTIA_FW_PART and PHY_AQUANTIA_FW_NAME options.
+
+config PHY_AQUANTIA_FW_PART
+	string "Aquantia firmware partition"
+	depends on PHY_AQUANTIA_UPLOAD_FW
+	help
+		Partition containing the firmware file.
+
+config PHY_AQUANTIA_FW_NAME
+	string "Aquantia firmware filename"
+	depends on PHY_AQUANTIA_UPLOAD_FW
+	help
+		Firmware filename.
 
 config PHY_ATHEROS
 	bool "Atheros Ethernet PHYs support"
@@ -55,6 +112,9 @@ config PHY_LXT
 config PHY_MARVELL
 	bool "Marvell Ethernet PHYs support"
 
+config PHY_MESON_GXL
+	bool "Amlogic Meson GXL Internal PHY support"
+
 config PHY_MICREL
 	bool "Micrel Ethernet PHYs support"
 	help
@@ -67,28 +127,38 @@ config PHY_MICREL
 if PHY_MICREL
 
 config PHY_MICREL_KSZ9021
-	bool "Micrel KSZ9021 family support"
+	bool
 	select PHY_GIGE
-	help
-	  Enable support for the Micrel KSZ9021 GbE PHY family.  If
-	  enabled, the extended register read/write for KSZ9021 PHYs
-	  is supported through the 'mdio' command and any RGMII signal
-	  delays configured in the device tree will be applied to the
-	  PHY during initialisation.
-
-	  Note that the KSZ9021 uses the same part number os the
-	  KSZ8921BL, so enabling this option disables support for the
-	  KSZ8721BL.
+	select PHY_MICREL_KSZ90X1
 
 config PHY_MICREL_KSZ9031
-	bool "Micrel KSZ9031 family support"
+	bool
+	select PHY_GIGE
+	select PHY_MICREL_KSZ90X1
+
+config PHY_MICREL_KSZ90X1
+	bool "Micrel KSZ90x1 family support"
 	select PHY_GIGE
 	help
-	  Enable support for the Micrel KSZ9031 GbE PHY family.  If
-	  enabled, the extended register read/write for KSZ9021 PHYs
+	  Enable support for the Micrel KSZ9021 and KSZ9031 GbE PHYs. If
+	  enabled, the extended register read/write for KSZ90x1 PHYs
 	  is supported through the 'mdio' command and any RGMII signal
 	  delays configured in the device tree will be applied to the
-	  PHY during initialisatioin.
+	  PHY during initialization.
+
+	  This should not be enabled at the same time with PHY_MICREL_KSZ8XXX
+	  as the KSZ9021 and KS8721 share the same ID.
+
+config PHY_MICREL_KSZ8XXX
+	bool "Micrel KSZ8xxx family support"
+	default y if !PHY_MICREL_KSZ90X1
+	help
+	  Enable support for the 8000 series GbE PHYs manufactured by Micrel
+	  (now a part of Microchip). This includes drivers for the KSZ804,
+	  KSZ8031, KSZ8051, KSZ8081, KSZ8895, KSZ886x, and KSZ8721.
+
+	  This should not be enabled at the same time with PHY_MICREL_KSZ90X1
+	  as the KSZ9021 and KS8721 share the same ID.
 
 endif # PHY_MICREL
 
@@ -101,6 +171,16 @@ config PHY_NATSEMI
 config PHY_REALTEK
 	bool "Realtek Ethernet PHYs support"
 
+config RTL8211E_PINE64_GIGABIT_FIX
+	bool "Fix gigabit throughput on some Pine64+ models"
+	depends on PHY_REALTEK
+	help
+	  Configure the Realtek RTL8211E found on some Pine64+ models differently to
+	  fix throughput on Gigabit links, turning off all internal delays in the
+	  process. The settings that this touches are not documented in the CONFREG
+	  section of the RTL8211E datasheet, but come from Realtek by way of the
+	  Pine64 engineering team.
+
 config RTL8211X_PHY_FORCE_MASTER
 	bool "Ethernet PHY RTL8211x: force 1000BASE-T master mode"
 	depends on PHY_REALTEK