X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=drivers%2Fnet%2Fdm9000x.c;h=f0c4499edbc0481577cb4739b44f5041a68b7101;hb=eef2448039c43493b2f9def6f257f1006fb0e956;hp=709f67aac2c0fa51a01473b958864a33ad3a5984;hpb=93502a5e0adcfc0ce6cf8e3daa7eb9a4f4e53658;p=oweals%2Fu-boot.git

diff --git a/drivers/net/dm9000x.c b/drivers/net/dm9000x.c
index 709f67aac2..f0c4499edb 100644
--- a/drivers/net/dm9000x.c
+++ b/drivers/net/dm9000x.c
@@ -110,19 +110,27 @@ static board_info_t dm9000_info;
 
 /* function declaration ------------------------------------- */
 static int dm9000_probe(void);
-static u16 phy_read(int);
-static void phy_write(int, u16);
+static u16 dm9000_phy_read(int);
+static void dm9000_phy_write(int, u16);
 static u8 DM9000_ior(int);
 static void DM9000_iow(int reg, u8 value);
 
 /* DM9000 network board routine ---------------------------- */
-
+#ifndef CONFIG_DM9000_BYTE_SWAPPED
 #define DM9000_outb(d,r) writeb(d, (volatile u8 *)(r))
 #define DM9000_outw(d,r) writew(d, (volatile u16 *)(r))
 #define DM9000_outl(d,r) writel(d, (volatile u32 *)(r))
 #define DM9000_inb(r) readb((volatile u8 *)(r))
 #define DM9000_inw(r) readw((volatile u16 *)(r))
 #define DM9000_inl(r) readl((volatile u32 *)(r))
+#else
+#define DM9000_outb(d, r) __raw_writeb(d, r)
+#define DM9000_outw(d, r) __raw_writew(d, r)
+#define DM9000_outl(d, r) __raw_writel(d, r)
+#define DM9000_inb(r) __raw_readb(r)
+#define DM9000_inw(r) __raw_readw(r)
+#define DM9000_inl(r) __raw_readl(r)
+#endif
 
 #ifdef CONFIG_DM9000_DEBUG
 static void
@@ -361,7 +369,7 @@ static int dm9000_init(struct eth_device *dev, bd_t *bd)
 	DM9000_iow(DM9000_IMR, IMR_PAR);
 
 	i = 0;
-	while (!(phy_read(1) & 0x20)) {	/* autonegation complete bit */
+	while (!(dm9000_phy_read(1) & 0x20)) {	/* autonegation complete bit */
 		udelay(1000);
 		i++;
 		if (i == 10000) {
@@ -371,7 +379,7 @@ static int dm9000_init(struct eth_device *dev, bd_t *bd)
 	}
 
 	/* see what we've got */
-	lnk = phy_read(17) >> 12;
+	lnk = dm9000_phy_read(17) >> 12;
 	printf("operating at ");
 	switch (lnk) {
 	case 1:
@@ -398,8 +406,7 @@ static int dm9000_init(struct eth_device *dev, bd_t *bd)
   Hardware start transmission.
   Send a packet to media from the upper layer.
 */
-static int dm9000_send(struct eth_device *netdev, volatile void *packet,
-		     int length)
+static int dm9000_send(struct eth_device *netdev, void *packet, int length)
 {
 	int tmo;
 	struct board_info *db = &dm9000_info;
@@ -445,7 +452,7 @@ static void dm9000_halt(struct eth_device *netdev)
 	DM9000_DBG("%s\n", __func__);
 
 	/* RESET devie */
-	phy_write(0, 0x8000);	/* PHY RESET */
+	dm9000_phy_write(0, 0x8000);	/* PHY RESET */
 	DM9000_iow(DM9000_GPR, 0x01);	/* Power-Down PHY */
 	DM9000_iow(DM9000_IMR, 0x80);	/* Disable all interrupt */
 	DM9000_iow(DM9000_RCR, 0x00);	/* Disable RX */
@@ -581,7 +588,7 @@ DM9000_iow(int reg, u8 value)
    Read a word from phyxcer
 */
 static u16
-phy_read(int reg)
+dm9000_phy_read(int reg)
 {
 	u16 val;
 
@@ -593,7 +600,7 @@ phy_read(int reg)
 	val = (DM9000_ior(DM9000_EPDRH) << 8) | DM9000_ior(DM9000_EPDRL);
 
 	/* The read data keeps on REG_0D & REG_0E */
-	DM9000_DBG("phy_read(0x%x): 0x%x\n", reg, val);
+	DM9000_DBG("dm9000_phy_read(0x%x): 0x%x\n", reg, val);
 	return val;
 }
 
@@ -601,7 +608,7 @@ phy_read(int reg)
    Write a word to phyxcer
 */
 static void
-phy_write(int reg, u16 value)
+dm9000_phy_write(int reg, u16 value)
 {
 
 	/* Fill the phyxcer register into REG_0C */
@@ -613,7 +620,7 @@ phy_write(int reg, u16 value)
 	DM9000_iow(DM9000_EPCR, 0xa);	/* Issue phyxcer write command */
 	udelay(500);			/* Wait write complete */
 	DM9000_iow(DM9000_EPCR, 0x0);	/* Clear phyxcer write command */
-	DM9000_DBG("phy_write(reg:0x%x, value:0x%x)\n", reg, value);
+	DM9000_DBG("dm9000_phy_write(reg:0x%x, value:0x%x)\n", reg, value);
 }
 
 int dm9000_initialize(bd_t *bis)