X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=drivers%2Fnet%2Fdm9000x.c;h=04241109cc016798ed9e37f1fa9721e0aa976bac;hb=c1761eeab038777c6aa0cbce3c4db63fe5aab037;hp=a7fef56030f08171ac1c054724b9f20651e7c808;hpb=6ca9da4d42aeb43df5ef29f7d0518009df583b2f;p=oweals%2Fu-boot.git diff --git a/drivers/net/dm9000x.c b/drivers/net/dm9000x.c index a7fef56030..04241109cc 100644 --- a/drivers/net/dm9000x.c +++ b/drivers/net/dm9000x.c @@ -110,19 +110,27 @@ static board_info_t dm9000_info; /* function declaration ------------------------------------- */ static int dm9000_probe(void); -static u16 phy_read(int); -static void phy_write(int, u16); +static u16 dm9000_phy_read(int); +static void dm9000_phy_write(int, u16); static u8 DM9000_ior(int); static void DM9000_iow(int reg, u8 value); /* DM9000 network board routine ---------------------------- */ - -#define DM9000_outb(d,r) ( *(volatile u8 *)r = d ) -#define DM9000_outw(d,r) ( *(volatile u16 *)r = d ) -#define DM9000_outl(d,r) ( *(volatile u32 *)r = d ) -#define DM9000_inb(r) (*(volatile u8 *)r) -#define DM9000_inw(r) (*(volatile u16 *)r) -#define DM9000_inl(r) (*(volatile u32 *)r) +#ifndef CONFIG_DM9000_BYTE_SWAPPED +#define DM9000_outb(d,r) writeb(d, (volatile u8 *)(r)) +#define DM9000_outw(d,r) writew(d, (volatile u16 *)(r)) +#define DM9000_outl(d,r) writel(d, (volatile u32 *)(r)) +#define DM9000_inb(r) readb((volatile u8 *)(r)) +#define DM9000_inw(r) readw((volatile u16 *)(r)) +#define DM9000_inl(r) readl((volatile u32 *)(r)) +#else +#define DM9000_outb(d, r) __raw_writeb(d, r) +#define DM9000_outw(d, r) __raw_writew(d, r) +#define DM9000_outl(d, r) __raw_writel(d, r) +#define DM9000_inb(r) __raw_readb(r) +#define DM9000_inw(r) __raw_readw(r) +#define DM9000_inl(r) __raw_readl(r) +#endif #ifdef CONFIG_DM9000_DEBUG static void @@ -361,7 +369,7 @@ static int dm9000_init(struct eth_device *dev, bd_t *bd) DM9000_iow(DM9000_IMR, IMR_PAR); i = 0; - while (!(phy_read(1) & 0x20)) { /* autonegation complete bit */ + while (!(dm9000_phy_read(1) & 0x20)) { /* autonegation complete bit */ udelay(1000); i++; if (i == 10000) { @@ -371,7 +379,7 @@ static int dm9000_init(struct eth_device *dev, bd_t *bd) } /* see what we've got */ - lnk = phy_read(17) >> 12; + lnk = dm9000_phy_read(17) >> 12; printf("operating at "); switch (lnk) { case 1: @@ -445,7 +453,7 @@ static void dm9000_halt(struct eth_device *netdev) DM9000_DBG("%s\n", __func__); /* RESET devie */ - phy_write(0, 0x8000); /* PHY RESET */ + dm9000_phy_write(0, 0x8000); /* PHY RESET */ DM9000_iow(DM9000_GPR, 0x01); /* Power-Down PHY */ DM9000_iow(DM9000_IMR, 0x80); /* Disable all interrupt */ DM9000_iow(DM9000_RCR, 0x00); /* Disable RX */ @@ -581,7 +589,7 @@ DM9000_iow(int reg, u8 value) Read a word from phyxcer */ static u16 -phy_read(int reg) +dm9000_phy_read(int reg) { u16 val; @@ -593,7 +601,7 @@ phy_read(int reg) val = (DM9000_ior(DM9000_EPDRH) << 8) | DM9000_ior(DM9000_EPDRL); /* The read data keeps on REG_0D & REG_0E */ - DM9000_DBG("phy_read(0x%x): 0x%x\n", reg, val); + DM9000_DBG("dm9000_phy_read(0x%x): 0x%x\n", reg, val); return val; } @@ -601,7 +609,7 @@ phy_read(int reg) Write a word to phyxcer */ static void -phy_write(int reg, u16 value) +dm9000_phy_write(int reg, u16 value) { /* Fill the phyxcer register into REG_0C */ @@ -613,7 +621,7 @@ phy_write(int reg, u16 value) DM9000_iow(DM9000_EPCR, 0xa); /* Issue phyxcer write command */ udelay(500); /* Wait write complete */ DM9000_iow(DM9000_EPCR, 0x0); /* Clear phyxcer write command */ - DM9000_DBG("phy_write(reg:0x%x, value:0x%x)\n", reg, value); + DM9000_DBG("dm9000_phy_write(reg:0x%x, value:0x%x)\n", reg, value); } int dm9000_initialize(bd_t *bis)