X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=drivers%2Fmtd%2Fspi%2Fsf_dataflash.c;h=e5c0e12faa392f0ffd0a2e0cdf593b266dda726a;hb=78cb000b84d478c51326cc816280c25dafe447e6;hp=b2a56da7cad688423d5639980b99cf0812badc44;hpb=bcbe3d157904d3dd4d6b18a81859db45a5da2678;p=oweals%2Fu-boot.git

diff --git a/drivers/mtd/spi/sf_dataflash.c b/drivers/mtd/spi/sf_dataflash.c
index b2a56da7ca..e5c0e12faa 100644
--- a/drivers/mtd/spi/sf_dataflash.c
+++ b/drivers/mtd/spi/sf_dataflash.c
@@ -1,12 +1,12 @@
 /*
- *
  * Atmel DataFlash probing
  *
  * Copyright (C) 2004-2009, 2015 Freescale Semiconductor, Inc.
  * Haikun Wang (haikun.wang@freescale.com)
  *
  * SPDX-License-Identifier:	GPL-2.0+
-*/
+ */
+
 #include <common.h>
 #include <dm.h>
 #include <errno.h>
@@ -67,15 +67,12 @@
 #define OP_WRITE_SECURITY_REVC	0x9A
 #define OP_WRITE_SECURITY	0x9B	/* revision D */
 
-
 struct dataflash {
 	uint8_t			command[16];
 	unsigned short		page_offset;	/* offset in flash address */
 };
 
-/*
- * Return the status of the DataFlash device.
- */
+/* Return the status of the DataFlash device */
 static inline int dataflash_status(struct spi_slave *spi)
 {
 	int ret;
@@ -114,9 +111,7 @@ static int dataflash_waitready(struct spi_slave *spi)
 	return -ETIME;
 }
 
-/*
- * Erase pages of flash.
- */
+/* Erase pages of flash */
 static int spi_dataflash_erase(struct udevice *dev, u32 offset, size_t len)
 {
 	struct dataflash	*dataflash;
@@ -139,15 +134,21 @@ static int spi_dataflash_erase(struct udevice *dev, u32 offset, size_t len)
 	debug("%s: erase addr=0x%x len 0x%x\n", dev->name, offset, len);
 
 	div_u64_rem(len, spi_flash->page_size, &rem);
-	if (rem)
+	if (rem) {
+		printf("%s: len(0x%x) isn't the multiple of page size(0x%x)\n",
+		       dev->name, len, spi_flash->page_size);
 		return -EINVAL;
+	}
 	div_u64_rem(offset, spi_flash->page_size, &rem);
-	if (rem)
+	if (rem) {
+		printf("%s: offset(0x%x) isn't the multiple of page size(0x%x)\n",
+		       dev->name, offset, spi_flash->page_size);
 		return -EINVAL;
+	}
 
 	status = spi_claim_bus(spi);
 	if (status) {
-		debug("SPI DATAFLASH: unable to claim SPI bus\n");
+		debug("dataflash: unable to claim SPI bus\n");
 		return status;
 	}
 
@@ -232,7 +233,7 @@ static int spi_dataflash_read(struct udevice *dev, u32 offset, size_t len,
 
 	status = spi_claim_bus(spi);
 	if (status) {
-		debug("SPI DATAFLASH: unable to claim SPI bus\n");
+		debug("dataflash: unable to claim SPI bus\n");
 		return status;
 	}
 
@@ -290,7 +291,7 @@ int spi_dataflash_write(struct udevice *dev, u32 offset, size_t len,
 
 	status = spi_claim_bus(spi);
 	if (status) {
-		debug("SPI DATAFLASH: unable to claim SPI bus\n");
+		debug("dataflash: unable to claim SPI bus\n");
 		return status;
 	}
 
@@ -387,7 +388,7 @@ int spi_dataflash_write(struct udevice *dev, u32 offset, size_t len,
 
 		/* Check result of the compare operation */
 		if (status & (1 << 6)) {
-			printf("SPI DataFlash: write compare page %u, err %d\n",
+			printf("dataflash: write compare page %u, err %d\n",
 			       pageaddr, status);
 			remaining = 0;
 			status = -EIO;
@@ -501,9 +502,10 @@ static struct flash_info dataflash_data[] = {
 	{ "at45db642d",  0x1f2800, 8192, 1024, 10, SUP_POW2PS | IS_POW2PS},
 };
 
-static struct flash_info *jedec_probe(struct spi_slave *spi, u8 *id)
+static struct flash_info *jedec_probe(struct spi_slave *spi)
 {
 	int			tmp;
+	uint8_t			id[5];
 	uint32_t		jedec;
 	struct flash_info	*info;
 	int status;
@@ -517,6 +519,11 @@ static struct flash_info *jedec_probe(struct spi_slave *spi, u8 *id)
 	 * That's not an error; only rev C and newer chips handle it, and
 	 * only Atmel sells these chips.
 	 */
+	tmp = spi_flash_cmd(spi, CMD_READ_ID, id, sizeof(id));
+	if (tmp < 0) {
+		printf("dataflash: error %d reading JEDEC ID\n", tmp);
+		return ERR_PTR(tmp);
+	}
 	if (id[0] != 0x1f)
 		return NULL;
 
@@ -533,7 +540,7 @@ static struct flash_info *jedec_probe(struct spi_slave *spi, u8 *id)
 			if (info->flags & SUP_POW2PS) {
 				status = dataflash_status(spi);
 				if (status < 0) {
-					debug("SPI DataFlash: status error %d\n",
+					debug("dataflash: status error %d\n",
 					      status);
 					return NULL;
 				}
@@ -555,10 +562,8 @@ static struct flash_info *jedec_probe(struct spi_slave *spi, u8 *id)
 	 * size (it might be binary) even when we can tell which density
 	 * class is involved (legacy chip id scheme).
 	 */
-	printf("SPI DataFlash: Unsupported flash IDs: ");
-	printf("manuf %02x, jedec %04x, ext_jedec %04x\n",
-	       id[0], jedec, id[3] << 8 | id[4]);
-	return NULL;
+	printf("dataflash: JEDEC id %06x not handled\n", jedec);
+	return ERR_PTR(-ENODEV);
 }
 
 /*
@@ -580,21 +585,15 @@ static int spi_dataflash_probe(struct udevice *dev)
 	struct spi_slave *spi = dev_get_parent_priv(dev);
 	struct spi_flash *spi_flash;
 	struct flash_info *info;
-	u8 idcode[5];
-	int ret, status = 0;
+	int status;
 
 	spi_flash = dev_get_uclass_priv(dev);
+	spi_flash->spi = spi;
 	spi_flash->dev = dev;
 
-	ret = spi_claim_bus(spi);
-	if (ret)
-		return ret;
-
-	ret = spi_flash_cmd(spi, CMD_READ_ID, idcode, sizeof(idcode));
-	if (ret) {
-		printf("SPI DataFlash: Failed to get idcodes\n");
-		goto err_read_cmd;
-	}
+	status = spi_claim_bus(spi);
+	if (status)
+		return status;
 
 	/*
 	 * Try to detect dataflash by JEDEC ID.
@@ -603,79 +602,70 @@ static int spi_dataflash_probe(struct udevice *dev)
 	 * Both support the security register, though with different
 	 * write procedures.
 	 */
-	info = jedec_probe(spi, idcode);
-	if (info != NULL)
-		add_dataflash(dev, info->name, info->nr_pages,
-			      info->pagesize, info->pageoffset,
-			      (info->flags & SUP_POW2PS) ? 'd' : 'c');
-	else {
-		/*
-		* Older chips support only legacy commands, identifing
-		* capacity using bits in the status byte.
-		*/
-		status = dataflash_status(spi);
-		if (status <= 0 || status == 0xff) {
-			printf("SPI DataFlash: read status error %d\n", status);
-			if (status == 0 || status == 0xff)
-				status = -ENODEV;
-			goto err_read_cmd;
-		}
-		/*
-		* if there's a device there, assume it's dataflash.
-		* board setup should have set spi->max_speed_max to
-		* match f(car) for continuous reads, mode 0 or 3.
-		*/
-		switch (status & 0x3c) {
-		case 0x0c:	/* 0 0 1 1 x x */
-			status = add_dataflash(dev, "AT45DB011B",
-					       512, 264, 9, 0);
-			break;
-		case 0x14:	/* 0 1 0 1 x x */
-			status = add_dataflash(dev, "AT45DB021B",
-					       1024, 264, 9, 0);
-			break;
-		case 0x1c:	/* 0 1 1 1 x x */
-			status = add_dataflash(dev, "AT45DB041x",
-					       2048, 264, 9, 0);
-			break;
-		case 0x24:	/* 1 0 0 1 x x */
-			status = add_dataflash(dev, "AT45DB081B",
-					       4096, 264, 9, 0);
-			break;
-		case 0x2c:	/* 1 0 1 1 x x */
-			status = add_dataflash(dev, "AT45DB161x",
-					       4096, 528, 10, 0);
-			break;
-		case 0x34:	/* 1 1 0 1 x x */
-			status = add_dataflash(dev, "AT45DB321x",
-					       8192, 528, 10, 0);
-			break;
-		case 0x38:	/* 1 1 1 x x x */
-		case 0x3c:
-			status = add_dataflash(dev, "AT45DB642x",
-					       8192, 1056, 11, 0);
-			break;
-		/* obsolete AT45DB1282 not (yet?) supported */
-		default:
-			dev_info(&spi->dev, "unsupported device (%x)\n",
-				 status & 0x3c);
-			status = -ENODEV;
-			goto err_read_cmd;
-		}
+	info = jedec_probe(spi);
+	if (IS_ERR(info))
+		goto err_jedec_probe;
+	if (info != NULL) {
+		status = add_dataflash(dev, info->name, info->nr_pages,
+				info->pagesize, info->pageoffset,
+				(info->flags & SUP_POW2PS) ? 'd' : 'c');
+		if (status < 0)
+			goto err_status;
 	}
 
-	/* Assign spi data */
-	spi_flash->spi = spi;
-	spi_flash->memory_map = spi->memory_map;
-	spi_flash->dual_flash = spi->option;
+       /*
+	* Older chips support only legacy commands, identifing
+	* capacity using bits in the status byte.
+	*/
+	status = dataflash_status(spi);
+	if (status <= 0 || status == 0xff) {
+		printf("dataflash: read status error %d\n", status);
+		if (status == 0 || status == 0xff)
+			status = -ENODEV;
+		goto err_jedec_probe;
+	}
 
-	spi_release_bus(spi);
+       /*
+	* if there's a device there, assume it's dataflash.
+	* board setup should have set spi->max_speed_max to
+	* match f(car) for continuous reads, mode 0 or 3.
+	*/
+	switch (status & 0x3c) {
+	case 0x0c:	/* 0 0 1 1 x x */
+		status = add_dataflash(dev, "AT45DB011B", 512, 264, 9, 0);
+		break;
+	case 0x14:	/* 0 1 0 1 x x */
+		status = add_dataflash(dev, "AT45DB021B", 1024, 264, 9, 0);
+		break;
+	case 0x1c:	/* 0 1 1 1 x x */
+		status = add_dataflash(dev, "AT45DB041x", 2048, 264, 9, 0);
+		break;
+	case 0x24:	/* 1 0 0 1 x x */
+		status = add_dataflash(dev, "AT45DB081B", 4096, 264, 9, 0);
+		break;
+	case 0x2c:	/* 1 0 1 1 x x */
+		status = add_dataflash(dev, "AT45DB161x", 4096, 528, 10, 0);
+		break;
+	case 0x34:	/* 1 1 0 1 x x */
+		status = add_dataflash(dev, "AT45DB321x", 8192, 528, 10, 0);
+		break;
+	case 0x38:	/* 1 1 1 x x x */
+	case 0x3c:
+		status = add_dataflash(dev, "AT45DB642x", 8192, 1056, 11, 0);
+		break;
+	/* obsolete AT45DB1282 not (yet?) supported */
+	default:
+		printf("dataflash: unsupported device (%x)\n", status & 0x3c);
+		status = -ENODEV;
+		goto err_status;
+	}
 
-	return 0;
+	return status;
 
-err_read_cmd:
+err_status:
+	spi_free_slave(spi);
+err_jedec_probe:
 	spi_release_bus(spi);
-
 	return status;
 }