X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=drivers%2Fmmc%2Ffsl_esdhc_spl.c;h=4557cd3dd78dd62bdab923a4cedf2591282a2487;hb=992bcf4f27794a7f578e0145ef1c933a87a1d83c;hp=8fc263f4f40b864d8c9c8090c88896a7995a2a87;hpb=a891601ce51edbafa1a2750c96a618e4fcbca1c2;p=oweals%2Fu-boot.git

diff --git a/drivers/mmc/fsl_esdhc_spl.c b/drivers/mmc/fsl_esdhc_spl.c
index 8fc263f4f4..4557cd3dd7 100644
--- a/drivers/mmc/fsl_esdhc_spl.c
+++ b/drivers/mmc/fsl_esdhc_spl.c
@@ -1,7 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #include <common.h>
@@ -19,6 +18,33 @@
 #define MBRDBR_BOOT_SIG_AA	0x1ff
 #define CONFIG_CFG_DATA_SECTOR	0
 
+
+void mmc_spl_load_image(uint32_t offs, unsigned int size, void *vdst)
+{
+	uint blk_start, blk_cnt, err;
+
+	struct mmc *mmc = find_mmc_device(0);
+	if (!mmc) {
+		puts("spl: mmc device not found!!\n");
+		hang();
+	}
+
+	if (mmc_init(mmc)) {
+		puts("MMC init failed\n");
+		return;
+	}
+
+	blk_start = ALIGN(offs, mmc->read_bl_len) / mmc->read_bl_len;
+	blk_cnt = ALIGN(size, mmc->read_bl_len) / mmc->read_bl_len;
+
+	err = mmc->block_dev.block_read(&mmc->block_dev, blk_start, blk_cnt,
+					vdst);
+	if (err != blk_cnt) {
+		puts("spl: mmc read failed!!\n");
+		hang();
+	}
+}
+
 /*
  * The main entry for mmc booting. It's necessary that SDRAM is already
  * configured and available since this code loads the main U-Boot image
@@ -29,10 +55,12 @@ void __noreturn mmc_boot(void)
 {
 	__attribute__((noreturn)) void (*uboot)(void);
 	uint blk_start, blk_cnt, err;
-	u32 blklen;
+#ifndef CONFIG_FSL_CORENET
 	uchar *tmp_buf;
+	u32 blklen;
 	uchar val;
 	uint i, byte_num;
+#endif
 	u32 offset, code_len;
 	struct mmc *mmc;
 
@@ -57,7 +85,8 @@ void __noreturn mmc_boot(void)
 	/*
 	* Read source addr from sd card
 	*/
-	err = mmc->block_dev.block_read(0, CONFIG_CFG_DATA_SECTOR, 1, tmp_buf);
+	err = mmc->block_dev.block_read(&mmc->block_dev,
+					CONFIG_CFG_DATA_SECTOR, 1, tmp_buf);
 	if (err != 1) {
 		puts("spl: mmc read failed!!\n");
 		free(tmp_buf);
@@ -98,11 +127,13 @@ void __noreturn mmc_boot(void)
 #endif
 	blk_start = ALIGN(offset, mmc->read_bl_len) / mmc->read_bl_len;
 	blk_cnt = ALIGN(code_len, mmc->read_bl_len) / mmc->read_bl_len;
-	err = mmc->block_dev.block_read(0, blk_start, blk_cnt,
+	err = mmc->block_dev.block_read(&mmc->block_dev, blk_start, blk_cnt,
 					(uchar *)CONFIG_SYS_MMC_U_BOOT_DST);
 	if (err != blk_cnt) {
 		puts("spl: mmc read failed!!\n");
+#ifndef CONFIG_FSL_CORENET
 		free(tmp_buf);
+#endif
 		hang();
 	}