X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=drivers%2Fmmc%2FKconfig;h=bb38787eca619c6bdc453949c816e6455a15d5fb;hb=891483186052b259852f3f48926ff307763f4eb0;hp=c23299ea962b6f435071550de5d6693e4c303a6b;hpb=86f578ee85a697afb980233312f9aac1d98816df;p=oweals%2Fu-boot.git diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig index c23299ea96..bb38787eca 100644 --- a/drivers/mmc/Kconfig +++ b/drivers/mmc/Kconfig @@ -46,6 +46,24 @@ config SPL_DM_MMC if MMC +config MMC_SPI + bool "Support for SPI-based MMC controller" + depends on DM_MMC && DM_SPI + help + This selects SPI-based MMC controllers. + If you have an MMC controller on a SPI bus, say Y here. + + If unsure, say N. + +config MMC_SPI_CRC_ON + bool "Support CRC for SPI-based MMC controller" + depends on MMC_SPI + default y + help + This enables CRC for SPI-based MMC controllers. + + If unsure, say N. + config ARM_PL180_MMCI bool "ARM AMBA Multimedia Card Interface and compatible support" depends on DM_MMC && OF_CONTROL @@ -61,7 +79,7 @@ config MMC_QUIRKS help Some cards and hosts may sometimes behave unexpectedly (quirks). This option enable workarounds to handle those quirks. Some of them - are enabled by default, other may require additionnal flags or are + are enabled by default, other may require additional flags or are enabled by the host driver. config MMC_HW_PARTITIONING @@ -117,6 +135,18 @@ config SPL_MMC_UHS_SUPPORT cards. The IO voltage must be switchable from 3.3v to 1.8v. The bus frequency can go up to 208MHz (SDR104) +config MMC_HS400_ES_SUPPORT + bool "enable HS400 Enhanced Strobe support" + help + The HS400 Enhanced Strobe mode is support by some eMMC. The bus + frequency is up to 200MHz. This mode does not tune the IO. + +config SPL_MMC_HS400_ES_SUPPORT + bool "enable HS400 Enhanced Strobe support in SPL" + help + The HS400 Enhanced Strobe mode is support by some eMMC. The bus + frequency is up to 200MHz. This mode does not tune the IO. + config MMC_HS400_SUPPORT bool "enable HS400 support" select MMC_HS200_SUPPORT @@ -126,6 +156,7 @@ config MMC_HS400_SUPPORT config SPL_MMC_HS400_SUPPORT bool "enable HS400 support in SPL" + select SPL_MMC_HS200_SUPPORT help The HS400 mode is support by some eMMC. The bus frequency is up to 200MHz. This mode requires tuning the IO. @@ -136,7 +167,6 @@ config MMC_HS200_SUPPORT The HS200 mode is support by some eMMC. The bus frequency is up to 200MHz. This mode requires tuning the IO. - config SPL_MMC_HS200_SUPPORT bool "enable HS200 support in SPL" help @@ -158,21 +188,6 @@ config MMC_TRACE If you need to see the MMC core message, say Y. -config SPL_MMC_TINY - bool "Tiny MMC framework in SPL" - help - Enable MMC framework tinification support. This option is useful if - if your SPL is extremely size constrained. Heed the warning, enable - this option if and only if you know exactly what you are doing, if - you are reading this help text, you most likely have no idea :-) - - The MMC framework is reduced to bare minimum to be useful. No malloc - support is needed for the MMC framework operation with this option - enabled. The framework supports exactly one MMC device and exactly - one MMC driver. The MMC driver can be adjusted to avoid any malloc - operations too, which can remove the need for malloc support in SPL - and thus further reduce footprint. - config MMC_DAVINCI bool "TI DAVINCI Multimedia Card Interface support" depends on ARCH_DAVINCI @@ -190,6 +205,17 @@ config MMC_DW block, this provides host support for SD and MMC interfaces, in both PIO, internal DMA mode and external DMA mode. +config MMC_DW_CORTINA + bool "Cortina specific extensions for Synopsys DW Memory Card Interface" + depends on DM_MMC + depends on MMC_DW + depends on BLK + default n + help + This selects support for Cortina SoC specific extensions to the + Synopsys DesignWare Memory Card Interface driver. Select this option + for platforms based on Cortina CAxxxx Soc's. + config MMC_DW_EXYNOS bool "Exynos specific extensions for Synopsys DW Memory Card Interface" depends on ARCH_EXYNOS @@ -405,6 +431,17 @@ config SPL_MMC_SDHCI_ADMA This enables support for the ADMA (Advanced DMA) defined in the SD Host Controller Standard Specification Version 3.00 in SPL. +config MMC_SDHCI_ASPEED + bool "Aspeed SDHCI controller" + depends on ARCH_ASPEED + depends on DM_MMC + depends on MMC_SDHCI + help + Enables support for the Aspeed SDHCI 2.0 controller present on Aspeed + SoCs. This device is compatible with SD 3.0 and/or MMC 4.3 + specifications. On the AST2600, the device is also compatible with + MMC 5.1 and eMMC 3.0. + config MMC_SDHCI_ATMEL bool "Atmel SDHCI controller support" depends on ARCH_AT91 @@ -453,14 +490,26 @@ config MMC_SDHCI_CADENCE If unsure, say N. -config MMC_SDHCI_K3_ARASAN - bool "Arasan SDHCI controller for TI's K3 based SoCs" +config MMC_SDHCI_AM654 + bool "SDHCI Controller on TI's Am654 devices" depends on ARCH_K3 depends on MMC_SDHCI depends on DM_MMC && OF_CONTROL && BLK + depends on REGMAP help - Support for Arasan SDHCI host controller on Texas Instruments' - K3 family based SoC platforms + Support for Secure Digital Host Controller Interface (SDHCI) + controllers present on TI's AM654 SOCs. + +config MMC_SDHCI_IPROC + bool "SDHCI support for the iProc SD/MMC Controller" + depends on MMC_SDHCI + help + This selects the iProc SD/MMC controller. + + If you have a Broadcom IPROC platform with SD or MMC devices, + say Y or M here. + + If unsure, say N. config MMC_SDHCI_KONA bool "SDHCI support on Broadcom KONA platform" @@ -575,6 +624,17 @@ config MMC_SDHCI_TEGRA If unsure, say N. +config TEGRA124_MMC_DISABLE_EXT_LOOPBACK + bool "Disable external clock loopback" + depends on MMC_SDHCI_TEGRA && TEGRA124 + help + Disable the external clock loopback and use the internal one on SDMMC3 + as per the SDMMC_VENDOR_MISC_CNTRL_0 register's SDMMC_SPARE1 bits + being set to 0xfffd according to the TRM. + + TODO(marcel.ziswiler@toradex.com): Move to device tree controlled + approach once proper kernel integration made it mainline. + config MMC_SDHCI_ZYNQ bool "Arasan SDHCI controller support" depends on ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL @@ -596,6 +656,12 @@ config ZYNQ_SDHCI_MIN_FREQ help Set the minimum frequency of the controller. +config ZYNQ_HISPD_BROKEN + bool "High speed broken for Zynq SDHCI controller" + depends on MMC_SDHCI_ZYNQ + help + Set if high speed mode is broken. + config MMC_SUNXI bool "Allwinner sunxi SD/MMC Host Controller support" depends on ARCH_SUNXI && !UART0_PORT_F @@ -643,7 +709,7 @@ config FTSDC010_SDIO config MMC_MTK bool "MediaTek SD/MMC Card Interface support" - depends on ARCH_MEDIATEK + depends on ARCH_MEDIATEK || ARCH_MTMIPS depends on BLK && DM_MMC depends on OF_CONTROL help @@ -654,22 +720,24 @@ config MMC_MTK endif -config TEGRA124_MMC_DISABLE_EXT_LOOPBACK - bool "Disable external clock loopback" - depends on MMC_SDHCI_TEGRA && TEGRA124 +config FSL_ESDHC + bool "Freescale/NXP eSDHC controller support" help - Disable the external clock loopback and use the internal one on SDMMC3 - as per the SDMMC_VENDOR_MISC_CNTRL_0 register's SDMMC_SPARE1 bits - being set to 0xfffd according to the TRM. + This selects support for the eSDHC (Enhanced Secure Digital Host + Controller) found on numerous Freescale/NXP SoCs. - TODO(marcel.ziswiler@toradex.com): Move to device tree controlled - approach once proper kernel integration made it mainline. +config FSL_ESDHC_IMX + bool "Freescale/NXP i.MX eSDHC controller support" + help + This selects support for the i.MX eSDHC (Enhanced Secure Digital Host + Controller) found on numerous Freescale/NXP SoCs. -config FSL_ESDHC - bool "Freescale/NXP eSDHC controller support" +config FSL_USDHC + bool "Freescale/NXP i.MX uSDHC controller support" + depends on MX6 || MX7 ||ARCH_MX7ULP || IMX8 || IMX8M || IMXRT || TARGET_S32V234EVB + select FSL_ESDHC_IMX help - This selects support for the eSDHC (enhanced secure digital host - controller) found on numerous Freescale/NXP SoCs. + This enables the Ultra Secured Digital Host Controller enhancements endmenu