X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=drivers%2Fmmc%2FKconfig;h=bb38787eca619c6bdc453949c816e6455a15d5fb;hb=891483186052b259852f3f48926ff307763f4eb0;hp=98d3f7a1501afe454c04ca8b2b5446dff2d8884c;hpb=3a1a0dfc395e9f09e18fc103383e55d59c63f263;p=oweals%2Fu-boot.git

diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index 98d3f7a150..bb38787eca 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -79,7 +79,7 @@ config MMC_QUIRKS
 	help
 	  Some cards and hosts may sometimes behave unexpectedly (quirks).
 	  This option enable workarounds to handle those quirks. Some of them
-	  are enabled by default, other may require additionnal flags or are
+	  are enabled by default, other may require additional flags or are
 	  enabled by the host driver.
 
 config MMC_HW_PARTITIONING
@@ -156,6 +156,7 @@ config MMC_HS400_SUPPORT
 
 config SPL_MMC_HS400_SUPPORT
 	bool "enable HS400 support in SPL"
+	select SPL_MMC_HS200_SUPPORT
 	help
 	  The HS400 mode is support by some eMMC. The bus frequency is up to
 	  200MHz. This mode requires tuning the IO.
@@ -166,7 +167,6 @@ config MMC_HS200_SUPPORT
 	  The HS200 mode is support by some eMMC. The bus frequency is up to
 	  200MHz. This mode requires tuning the IO.
 
-
 config SPL_MMC_HS200_SUPPORT
 	bool "enable HS200 support in SPL"
 	help
@@ -205,6 +205,17 @@ config MMC_DW
 	  block, this provides host support for SD and MMC interfaces, in both
 	  PIO, internal DMA mode and external DMA mode.
 
+config MMC_DW_CORTINA
+	bool "Cortina specific extensions for Synopsys DW Memory Card Interface"
+	depends on DM_MMC
+	depends on MMC_DW
+	depends on BLK
+	default n
+	help
+	  This selects support for Cortina SoC specific extensions to the
+	  Synopsys DesignWare Memory Card Interface driver. Select this option
+	  for platforms based on Cortina CAxxxx Soc's.
+
 config MMC_DW_EXYNOS
 	bool "Exynos specific extensions for Synopsys DW Memory Card Interface"
 	depends on ARCH_EXYNOS
@@ -420,6 +431,17 @@ config SPL_MMC_SDHCI_ADMA
 	  This enables support for the ADMA (Advanced DMA) defined
 	  in the SD Host Controller Standard Specification Version 3.00 in SPL.
 
+config MMC_SDHCI_ASPEED
+	bool "Aspeed SDHCI controller"
+	depends on ARCH_ASPEED
+	depends on DM_MMC
+	depends on MMC_SDHCI
+	help
+	  Enables support for the Aspeed SDHCI 2.0 controller present on Aspeed
+	  SoCs. This device is compatible with SD 3.0 and/or MMC 4.3
+	  specifications. On the AST2600, the device is also compatible with
+	  MMC 5.1 and eMMC 3.0.
+
 config MMC_SDHCI_ATMEL
 	bool "Atmel SDHCI controller support"
 	depends on ARCH_AT91
@@ -473,10 +495,22 @@ config MMC_SDHCI_AM654
 	depends on ARCH_K3
 	depends on MMC_SDHCI
 	depends on DM_MMC && OF_CONTROL && BLK
+	depends on REGMAP
 	help
 	  Support for Secure Digital Host Controller Interface (SDHCI)
 	  controllers present on TI's AM654 SOCs.
 
+config MMC_SDHCI_IPROC
+	bool "SDHCI support for the iProc SD/MMC Controller"
+	depends on MMC_SDHCI
+	help
+	  This selects the iProc SD/MMC controller.
+
+	  If you have a Broadcom IPROC platform with SD or MMC devices,
+	  say Y or M here.
+
+	  If unsure, say N.
+
 config MMC_SDHCI_KONA
 	bool "SDHCI support on Broadcom KONA platform"
 	depends on MMC_SDHCI
@@ -590,6 +624,17 @@ config MMC_SDHCI_TEGRA
 
 	  If unsure, say N.
 
+config TEGRA124_MMC_DISABLE_EXT_LOOPBACK
+	bool "Disable external clock loopback"
+	depends on MMC_SDHCI_TEGRA && TEGRA124
+	help
+	  Disable the external clock loopback and use the internal one on SDMMC3
+	  as per the SDMMC_VENDOR_MISC_CNTRL_0 register's SDMMC_SPARE1 bits
+	  being set to 0xfffd according to the TRM.
+
+	  TODO(marcel.ziswiler@toradex.com): Move to device tree controlled
+	  approach once proper kernel integration made it mainline.
+
 config MMC_SDHCI_ZYNQ
 	bool "Arasan SDHCI controller support"
 	depends on ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL
@@ -611,6 +656,12 @@ config ZYNQ_SDHCI_MIN_FREQ
 	help
 	  Set the minimum frequency of the controller.
 
+config ZYNQ_HISPD_BROKEN
+	bool "High speed broken for Zynq SDHCI controller"
+	depends on MMC_SDHCI_ZYNQ
+	help
+	  Set if high speed mode is broken.
+
 config MMC_SUNXI
 	bool "Allwinner sunxi SD/MMC Host Controller support"
 	depends on ARCH_SUNXI && !UART0_PORT_F
@@ -658,7 +709,7 @@ config FTSDC010_SDIO
 
 config MMC_MTK
 	bool "MediaTek SD/MMC Card Interface support"
-	depends on ARCH_MEDIATEK
+	depends on ARCH_MEDIATEK || ARCH_MTMIPS
 	depends on BLK && DM_MMC
 	depends on OF_CONTROL
 	help
@@ -669,17 +720,6 @@ config MMC_MTK
 
 endif
 
-config TEGRA124_MMC_DISABLE_EXT_LOOPBACK
-	bool "Disable external clock loopback"
-	depends on MMC_SDHCI_TEGRA && TEGRA124
-	help
-	  Disable the external clock loopback and use the internal one on SDMMC3
-	  as per the SDMMC_VENDOR_MISC_CNTRL_0 register's SDMMC_SPARE1 bits
-	  being set to 0xfffd according to the TRM.
-
-	  TODO(marcel.ziswiler@toradex.com): Move to device tree controlled
-	  approach once proper kernel integration made it mainline.
-
 config FSL_ESDHC
 	bool "Freescale/NXP eSDHC controller support"
 	help
@@ -692,6 +732,13 @@ config FSL_ESDHC_IMX
 	  This selects support for the i.MX eSDHC (Enhanced Secure Digital Host
 	  Controller) found on numerous Freescale/NXP SoCs.
 
+config FSL_USDHC
+	bool "Freescale/NXP i.MX uSDHC controller support"
+	depends on MX6 || MX7 ||ARCH_MX7ULP || IMX8 || IMX8M || IMXRT || TARGET_S32V234EVB
+	select FSL_ESDHC_IMX
+	help
+	  This enables the Ultra Secured Digital Host Controller enhancements
+
 endmenu
 
 config SYS_FSL_ERRATUM_ESDHC111