X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=drivers%2Fmmc%2FKconfig;h=ab0627a8afb120035cf16053b76d42f780973541;hb=3dde8f20377c3a051dda64497bdf0cdb23e03a2d;hp=24b4eadd2abe1f3f7489b95591d2bd4531cec42b;hpb=ec4e99a4a24c84069c710df3202ecb1e501ff60f;p=oweals%2Fu-boot.git

diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index 24b4eadd2a..ab0627a8af 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -10,6 +10,13 @@ config MMC
 	  If you want MMC/SD/SDIO support, you should say Y here and
 	  also to your specific host controller driver.
 
+config MMC_WRITE
+	bool "support for MMC/SD write operations"
+	depends on MMC
+	default y
+	help
+	  Enable write access to MMC and SD Cards
+
 config DM_MMC
 	bool "Enable MMC controllers using Driver Model"
 	depends on DM
@@ -33,6 +40,84 @@ config SPL_DM_MMC
 
 if MMC
 
+config ARM_PL180_MMCI
+	bool "ARM AMBA Multimedia Card Interface and compatible support"
+	depends on DM_MMC && OF_CONTROL
+	help
+	  This selects the ARM(R) AMBA(R) PrimeCell Multimedia Card
+	  Interface (PL180, PL181 and compatible) support.
+	  If you have an ARM(R) platform with a Multimedia Card slot,
+	  say Y or M here.
+
+config MMC_QUIRKS
+	bool "Enable quirks"
+	default y
+	help
+	  Some cards and hosts may sometimes behave unexpectedly (quirks).
+	  This option enable workarounds to handle those quirks. Some of them
+	  are enabled by default, other may require additionnal flags or are
+	  enabled by the host driver.
+
+config MMC_HW_PARTITIONING
+	bool "Support for HW partitioning command(eMMC)"
+	default y
+	help
+	  This adds a command and an API to do hardware partitioning on eMMC
+	  devices.
+
+config MMC_IO_VOLTAGE
+	bool "Support IO voltage configuration"
+	help
+	  IO voltage configuration allows selecting the voltage level of the IO
+	  lines (not the level of main supply). This is required for UHS
+	  support. For eMMC this not mandatory, but not enabling this option may
+	  prevent the driver of using the faster modes.
+
+config SPL_MMC_IO_VOLTAGE
+	bool "Support IO voltage configuration in SPL"
+	default n
+	help
+	  IO voltage configuration allows selecting the voltage level of the IO
+	  lines (not the level of main supply). This is required for UHS
+	  support. For eMMC this not mandatory, but not enabling this option may
+	  prevent the driver of using the faster modes.
+
+config MMC_UHS_SUPPORT
+	bool "enable UHS support"
+	depends on MMC_IO_VOLTAGE
+	help
+	  The Ultra High Speed (UHS) bus is available on some SDHC and SDXC
+	  cards. The IO voltage must be switchable from 3.3v to 1.8v. The bus
+	  frequency can go up to 208MHz (SDR104)
+
+config SPL_MMC_UHS_SUPPORT
+	bool "enable UHS support in SPL"
+	depends on SPL_MMC_IO_VOLTAGE
+	help
+	  The Ultra High Speed (UHS) bus is available on some SDHC and SDXC
+	  cards. The IO voltage must be switchable from 3.3v to 1.8v. The bus
+	  frequency can go up to 208MHz (SDR104)
+
+config MMC_HS200_SUPPORT
+	bool "enable HS200 support"
+	help
+	  The HS200 mode is support by some eMMC. The bus frequency is up to
+	  200MHz. This mode requires tuning the IO.
+
+
+config SPL_MMC_HS200_SUPPORT
+	bool "enable HS200 support in SPL"
+	help
+	  The HS200 mode is support by some eMMC. The bus frequency is up to
+	  200MHz. This mode requires tuning the IO.
+
+config MMC_VERBOSE
+	bool "Output more information about the MMC"
+	default y
+	help
+	  Enable the output of more information about the card such as the
+	  operating mode.
+
 config SPL_MMC_TINY
 	bool "Tiny MMC framework in SPL"
 	help
@@ -386,12 +471,24 @@ config GENERIC_ATMEL_MCI
 
 config STM32_SDMMC2
 	bool "STMicroelectronics STM32H7 SD/MMC Host Controller support"
-	depends on DM_MMC && BLK && OF_CONTROL && DM_MMC_OPS
+	depends on DM_MMC && BLK && OF_CONTROL
 	help
 	  This selects support for the SD/MMC controller on STM32H7 SoCs.
 	  If you have a board based on such a SoC and with a SD/MMC slot,
 	  say Y or M here.
 
+config MMC_NDS32
+	bool "Andestech SD/MMC controller support"
+	depends on DM_MMC && OF_CONTROL && BLK && FTSDC010
+	help
+	  This enables support for the Andestech SD/MMM controller, which is
+	  based on Faraday IP.
+
+config FTSDC010
+	bool "Ftsdc010 SD/MMC controller Support"
+	help
+	  This SD/MMC controller is present in Andestech SoCs which is based on Faraday IP.
+
 endif
 
 config TEGRA124_MMC_DISABLE_EXT_LOOPBACK