X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=drivers%2Fmmc%2FKconfig;h=a8a689f4f56e9bf2037a54fae038a62e8e82b443;hb=3862b854740d296356a5cfd3146b270ad3501d97;hp=147e52d33225f9416a70da14fbfb8a6071caee03;hpb=b6acb5f1d993320ad53bb39b9742a3a44648442f;p=oweals%2Fu-boot.git diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig index 147e52d332..a8a689f4f5 100644 --- a/drivers/mmc/Kconfig +++ b/drivers/mmc/Kconfig @@ -20,18 +20,42 @@ config DM_MMC appear as block devices in U-Boot and can support filesystems such as EXT4 and FAT. -config DM_MMC_OPS - bool "Support MMC controller operations using Driver Model" - depends on DM_MMC - default y if DM_MMC +config SPL_DM_MMC + bool "Enable MMC controllers using Driver Model in SPL" + depends on SPL_DM && DM_MMC + default y help - Driver model provides a means of supporting device operations. This - option moves MMC operations under the control of driver model. The - option will be removed as soon as all DM_MMC drivers use it, as it - will the only supported behaviour. + This enables the MultiMediaCard (MMC) uclass which supports MMC and + Secure Digital I/O (SDIO) cards. Both removable (SD, micro-SD, etc.) + and non-removable (e.g. eMMC chip) devices are supported. These + appear as block devices in U-Boot and can support filesystems such + as EXT4 and FAT. if MMC +config ARM_PL180_MMCI + bool "ARM AMBA Multimedia Card Interface and compatible support" + depends on DM_MMC && OF_CONTROL + help + This selects the ARM(R) AMBA(R) PrimeCell Multimedia Card + Interface (PL180, PL181 and compatible) support. + If you have an ARM(R) platform with a Multimedia Card slot, + say Y or M here. + +config MMC_VERBOSE + bool "Output more information about the MMC" + default y + help + Enable the output of more information about the card such as the + operating mode. + +config SPL_MMC_VERBOSE + bool "Output more information about the MMC in SPL" + default n + help + Enable the output of more information about the card such as the + operating mode. + config SPL_MMC_TINY bool "Tiny MMC framework in SPL" help @@ -47,27 +71,6 @@ config SPL_MMC_TINY operations too, which can remove the need for malloc support in SPL and thus further reduce footprint. -config MSM_SDHCI - bool "Qualcomm SDHCI controller" - depends on DM_MMC && BLK && DM_MMC_OPS - depends on MMC_SDHCI - help - Enables support for SDHCI 2.0 controller present on some Qualcomm - Snapdragon devices. This device is compatible with eMMC v4.5 and - SD 3.0 specifications. Both SD and eMMC devices are supported. - Card-detect gpios are not supported. - -config ATMEL_SDHCI - bool "Atmel SDHCI controller support" - depends on DM_MMC && BLK && DM_MMC_OPS && ARCH_AT91 - depends on MMC_SDHCI - help - This enables support for the Atmel SDHCI controller, which supports - the embedded MultiMedia Card (e.MMC) Specification V4.51, the SD - Memory Card Specification V3.0, and the SDIO V3.0 specification. - It is compliant with the SD Host Controller Standard V3.0 - specification. - config MMC_DAVINCI bool "TI DAVINCI Multimedia Card Interface support" depends on ARCH_DAVINCI @@ -122,6 +125,12 @@ config MMC_DW_SOCFPGA Synopsys DesignWare Memory Card Interface driver. Select this option for platforms based on Altera SOCFPGA. +config MMC_MESON_GX + bool "Meson GX EMMC controller support" + depends on DM_MMC && BLK && ARCH_MESON + help + Support for EMMC host controller on Meson GX ARM SoCs platform (S905) + config MMC_MXC bool "Freescale i.MX21/27/31 or MPC512x Multimedia Card support" help @@ -139,8 +148,18 @@ config MMC_MXS If unsure, say N. +config MMC_PCI + bool "Support for MMC controllers on PCI" + help + This selects PCI-based MMC controllers. + If you have an MMC controller on a PCI bus, say Y here. + + If unsure, say N. + config MMC_OMAP_HS bool "TI OMAP High Speed Multimedia Card Interface support" + select DM_REGULATOR_PBIAS if DM_MMC && DM_REGULATOR + select DM_REGULATOR_PBIAS if DM_MMC && DM_REGULATOR help This selects the TI OMAP High Speed Multimedia card Interface. If you have an omap2plus board with a Multimedia Card slot, @@ -148,44 +167,37 @@ config MMC_OMAP_HS If unsure, say N. -config SH_SDHI - bool "SuperH/Renesas ARM SoCs on-chip SDHI host controller support" - depends on RMOBILE +config MMC_OMAP36XX_PINS + bool "Enable MMC1 on OMAP36xx/37xx" + depends on OMAP34XX && MMC_OMAP_HS help - Support for the on-chip SDHI host controller on SuperH/Renesas ARM SoCs platform + This enables extended-drain in the MMC/SD/SDIO1I/O and + GPIO-associated I/O cells (gpio_126, gpio_127, and gpio_129) + specific to the OMAP36xx/37xx using MMC1 -config PIC32_SDHCI - bool "Microchip PIC32 on-chip SDHCI support" - depends on DM_MMC && MACH_PIC32 - depends on MMC_SDHCI - help - Support for Microchip PIC32 SDHCI controller. + If you have a controller with this interface, say Y here. -config ZYNQ_SDHCI - bool "Arasan SDHCI controller support" - depends on DM_MMC && OF_CONTROL && BLK && DM_MMC_OPS - depends on MMC_SDHCI - help - Support for Arasan SDHCI host controller on Zynq/ZynqMP ARM SoCs platform + If unsure, say N. -config ROCKCHIP_SDHCI - bool "Arasan SDHCI controller for Rockchip support" - depends on DM_MMC && BLK && DM_MMC_OPS - depends on MMC_SDHCI +config SH_SDHI + bool "SuperH/Renesas ARM SoCs on-chip SDHI host controller support" + depends on ARCH_RMOBILE help - Support for Arasan SDHCI host controller on Rockchip ARM SoCs platform + Support for the on-chip SDHI host controller on SuperH/Renesas ARM SoCs platform config MMC_UNIPHIER - bool "UniPhier SD/MMC Host Controller support" - depends on ARCH_UNIPHIER - depends on BLK && DM_MMC_OPS + bool "UniPhier/RCar SD/MMC Host Controller support" + depends on ARCH_UNIPHIER || ARCH_RMOBILE + depends on BLK && DM_MMC depends on OF_CONTROL help - This selects support for the SD/MMC Host Controller on UniPhier SoCs. + This selects support for the Matsushita SD/MMC Host Controller on + SocioNext UniPhier and Renesas RCar SoCs. -config SANDBOX_MMC +config MMC_SANDBOX bool "Sandbox MMC support" - depends on MMC && SANDBOX + depends on SANDBOX + depends on BLK && DM_MMC && OF_CONTROL help This select a dummy sandbox MMC driver. At present this does nothing other than allow sandbox to be build with MMC support. This @@ -217,6 +229,18 @@ config MMC_SDHCI_SDMA This enables support for the SDMA (Single Operation DMA) defined in the SD Host Controller Standard Specification Version 1.00 . +config MMC_SDHCI_ATMEL + bool "Atmel SDHCI controller support" + depends on ARCH_AT91 + depends on DM_MMC && BLK && ARCH_AT91 + depends on MMC_SDHCI + help + This enables support for the Atmel SDHCI controller, which supports + the embedded MultiMedia Card (e.MMC) Specification V4.51, the SD + Memory Card Specification V3.0, and the SDIO V3.0 specification. + It is compliant with the SD Host Controller Standard V3.0 + specification. + config MMC_SDHCI_BCM2835 tristate "SDHCI support for the BCM2835 SD/MMC Controller" depends on ARCH_BCM283X @@ -232,7 +256,7 @@ config MMC_SDHCI_BCM2835 config MMC_SDHCI_CADENCE bool "SDHCI support for the Cadence SD/SDIO/eMMC controller" - depends on BLK && DM_MMC_OPS + depends on BLK && DM_MMC depends on MMC_SDHCI depends on OF_CONTROL help @@ -252,6 +276,16 @@ config MMC_SDHCI_KONA If you have a controller with this interface, say Y here. +config MMC_SDHCI_MSM + bool "Qualcomm SDHCI controller" + depends on BLK && DM_MMC + depends on MMC_SDHCI + help + Enables support for SDHCI 2.0 controller present on some Qualcomm + Snapdragon devices. This device is compatible with eMMC v4.5 and + SD 3.0 specifications. Both SD and eMMC devices are supported. + Card-detect gpios are not supported. + config MMC_SDHCI_MV bool "SDHCI support on Marvell platform" depends on ARCH_MVEBU @@ -264,6 +298,21 @@ config MMC_SDHCI_MV If unsure, say N. +config MMC_SDHCI_PIC32 + bool "Microchip PIC32 on-chip SDHCI support" + depends on DM_MMC && MACH_PIC32 + depends on MMC_SDHCI + help + Support for Microchip PIC32 SDHCI controller. + +config MMC_SDHCI_ROCKCHIP + bool "Arasan SDHCI controller for Rockchip support" + depends on ARCH_ROCKCHIP + depends on DM_MMC && BLK + depends on MMC_SDHCI + help + Support for Arasan SDHCI host controller on Rockchip ARM SoCs platform + config MMC_SDHCI_S5P bool "SDHCI support on Samsung S5P SoC" depends on MMC_SDHCI @@ -287,6 +336,13 @@ config MMC_SDHCI_SPEAR If unsure, say N. +config MMC_SDHCI_STI + bool "SDHCI support for STMicroelectronics SoC" + depends on MMC_SDHCI && OF_CONTROL + help + This selects the Secure Digital Host Controller Interface (SDHCI) + on STMicroelectronics STiH410 SoC. + config MMC_SDHCI_XENON bool "SDHCI support for the Xenon SDHCI controller" depends on MMC_SDHCI && DM_MMC && OF_CONTROL @@ -298,6 +354,20 @@ config MMC_SDHCI_XENON If unsure, say N. +config MMC_SDHCI_TANGIER + bool "Tangier SDHCI controller support" + depends on DM_MMC && BLK + depends on MMC_SDHCI + help + This selects support for SDHCI controller on Tanginer + SoC. Note that this controller does not sit on PCI bus and, + hence, cannot be enumerated by standard PCI means. + + If you're using an Intel Tangier SoC (available on Intel + Edison board), say Y here. + + If unsure, say N. + config MMC_SDHCI_TEGRA bool "SDHCI platform support for the Tegra SD/MMC Controller" depends on TEGRA @@ -308,6 +378,14 @@ config MMC_SDHCI_TEGRA If unsure, say N. +config MMC_SDHCI_ZYNQ + bool "Arasan SDHCI controller support" + depends on ARCH_ZYNQ || ARCH_ZYNQMP + depends on DM_MMC && OF_CONTROL && BLK + depends on MMC_SDHCI + help + Support for Arasan SDHCI host controller on Zynq/ZynqMP ARM SoCs platform + config MMC_SUNXI bool "Allwinner sunxi SD/MMC Host Controller support" depends on ARCH_SUNXI && !UART0_PORT_F @@ -316,8 +394,52 @@ config MMC_SUNXI This selects support for the SD/MMC Host Controller on Allwinner sunxi SoCs. +config MMC_SUNXI_HAS_NEW_MODE + bool + depends on MMC_SUNXI + +config GENERIC_ATMEL_MCI + bool "Atmel Multimedia Card Interface support" + depends on DM_MMC && BLK && ARCH_AT91 + help + This enables support for Atmel High Speed Multimedia Card Interface + (HSMCI), which supports the MultiMedia Card (MMC) Specification V4.3, + the SD Memory Card Specification V2.0, the SDIO V2.0 specification + and CE-ATA V1.1. + +config STM32_SDMMC2 + bool "STMicroelectronics STM32H7 SD/MMC Host Controller support" + depends on DM_MMC && BLK && OF_CONTROL + help + This selects support for the SD/MMC controller on STM32H7 SoCs. + If you have a board based on such a SoC and with a SD/MMC slot, + say Y or M here. + +config MMC_NDS32 + bool "Andestech SD/MMC controller support" + depends on DM_MMC && OF_CONTROL && BLK && FTSDC010 + help + This enables support for the Andestech SD/MMM controller, which is + based on Faraday IP. + +config FTSDC010 + bool "Ftsdc010 SD/MMC controller Support" + help + This SD/MMC controller is present in Andestech SoCs which is based on Faraday IP. + endif +config TEGRA124_MMC_DISABLE_EXT_LOOPBACK + bool "Disable external clock loopback" + depends on MMC_SDHCI_TEGRA && TEGRA124 + help + Disable the external clock loopback and use the internal one on SDMMC3 + as per the SDMMC_VENDOR_MISC_CNTRL_0 register's SDMMC_SPARE1 bits + being set to 0xfffd according to the TRM. + + TODO(marcel.ziswiler@toradex.com): Move to device tree controlled + approach once proper kernel integration made it mainline. + endmenu config SYS_FSL_ERRATUM_ESDHC111