X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=drivers%2Fi2c%2Ffsl_i2c.c;h=ff7f25a0ef7cdf2ce46cecc7954e654bc0d0d853;hb=c8434ccaceb987babfc925fe86db473a44352cf4;hp=0c5f6be23f715c3a884fa198286cdc8870516e99;hpb=d01ee4db9302cfccaa5c548a1c4e873b415681a0;p=oweals%2Fu-boot.git diff --git a/drivers/i2c/fsl_i2c.c b/drivers/i2c/fsl_i2c.c index 0c5f6be23f..ff7f25a0ef 100644 --- a/drivers/i2c/fsl_i2c.c +++ b/drivers/i2c/fsl_i2c.c @@ -1,6 +1,9 @@ /* * Copyright 2006,2009 Freescale Semiconductor, Inc. * + * 2012, Heiko Schocher, DENX Software Engineering, hs@denx.de. + * Changes for multibus/multiadapter I2C support. + * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * Version 2 as published by the Free Software Foundation. @@ -17,12 +20,8 @@ */ #include - -#ifdef CONFIG_HARD_I2C - #include #include /* Functional interface */ - #include #include /* HW definitions */ @@ -39,7 +38,7 @@ * generic value. */ #ifndef CONFIG_I2C_TIMEOUT -#define CONFIG_I2C_TIMEOUT 10000 +#define CONFIG_I2C_TIMEOUT 100000 #endif #define I2C_READ_BIT 1 @@ -47,25 +46,16 @@ DECLARE_GLOBAL_DATA_PTR; -/* Initialize the bus pointer to whatever one the SPD EEPROM is on. - * Default is bus 0. This is necessary because the DDR initialization - * runs from ROM, and we can't switch buses because we can't modify - * the global variables. - */ -#ifndef CONFIG_SYS_SPD_BUS_NUM -#define CONFIG_SYS_SPD_BUS_NUM 0 +static const struct fsl_i2c *i2c_dev[4] = { + (struct fsl_i2c *)(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_I2C_OFFSET), +#ifdef CONFIG_SYS_FSL_I2C2_OFFSET + (struct fsl_i2c *)(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_I2C2_OFFSET), #endif -static unsigned int i2c_bus_num __attribute__ ((section (".data"))) = CONFIG_SYS_SPD_BUS_NUM; -#if defined(CONFIG_I2C_MUX) -static unsigned int i2c_bus_num_mux __attribute__ ((section ("data"))) = 0; +#ifdef CONFIG_SYS_FSL_I2C3_OFFSET + (struct fsl_i2c *)(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_I2C3_OFFSET), #endif - -static unsigned int i2c_bus_speed[2] = {CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SPEED}; - -static const struct fsl_i2c *i2c_dev[2] = { - (struct fsl_i2c *) (CONFIG_SYS_IMMR + CONFIG_SYS_I2C_OFFSET), -#ifdef CONFIG_SYS_I2C2_OFFSET - (struct fsl_i2c *) (CONFIG_SYS_IMMR + CONFIG_SYS_I2C2_OFFSET) +#ifdef CONFIG_SYS_FSL_I2C4_OFFSET + (struct fsl_i2c *)(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_I2C4_OFFSET) #endif }; @@ -100,29 +90,9 @@ static const struct fsl_i2c *i2c_dev[2] = { */ static const struct { unsigned short divider; -#ifdef __PPC__ - u8 dfsr; -#endif u8 fdr; } fsl_i2c_speed_map[] = { -#ifdef __PPC__ - {160, 1, 32}, {192, 1, 33}, {224, 1, 34}, {256, 1, 35}, - {288, 1, 0}, {320, 1, 1}, {352, 6, 1}, {384, 1, 2}, {416, 6, 2}, - {448, 1, 38}, {480, 1, 3}, {512, 1, 39}, {544, 11, 3}, {576, 1, 4}, - {608, 22, 3}, {640, 1, 5}, {672, 32, 3}, {704, 11, 5}, {736, 43, 3}, - {768, 1, 6}, {800, 54, 3}, {832, 11, 6}, {896, 1, 42}, {960, 1, 7}, - {1024, 1, 43}, {1088, 22, 7}, {1152, 1, 8}, {1216, 43, 7}, {1280, 1, 9}, - {1408, 22, 9}, {1536, 1, 10}, {1664, 22, 10}, {1792, 1, 46}, - {1920, 1, 11}, {2048, 1, 47}, {2176, 43, 11}, {2304, 1, 12}, - {2560, 1, 13}, {2816, 43, 13}, {3072, 1, 14}, {3328, 43, 14}, - {3584, 1, 50}, {3840, 1, 15}, {4096, 1, 51}, {4608, 1, 16}, - {5120, 1, 17}, {6144, 1, 18}, {7168, 1, 54}, {7680, 1, 19}, - {8192, 1, 55}, {9216, 1, 20}, {10240, 1, 21}, {12288, 1, 22}, - {14336, 1, 58}, {15360, 1, 23}, {16384, 1, 59}, {18432, 1, 24}, - {20480, 1, 25}, {24576, 1, 26}, {28672, 1, 62}, {30720, 1, 27}, - {32768, 1, 63}, {36864, 1, 28}, {40960, 1, 29}, {49152, 1, 30}, - {61440, 1, 31}, {-1, 1, 31} -#elif defined(__M68K__) +#ifdef __M68K__ {20, 32}, {22, 33}, {24, 34}, {26, 35}, {28, 0}, {28, 36}, {30, 1}, {32, 37}, {34, 2}, {36, 38}, {40, 3}, {40, 39}, @@ -157,8 +127,7 @@ static const struct { static unsigned int set_i2c_bus_speed(const struct fsl_i2c *dev, unsigned int i2c_clk, unsigned int speed) { - unsigned short divider = min(i2c_clk / speed, (unsigned short) -1); - unsigned int i; + unsigned short divider = min(i2c_clk / speed, (unsigned int)USHRT_MAX); /* * We want to choose an FDR/DFSR that generates an I2C bus speed that @@ -166,78 +135,182 @@ static unsigned int set_i2c_bus_speed(const struct fsl_i2c *dev, * want the first divider that is equal to or greater than the * calculated divider. */ - - for (i = 0; i < ARRAY_SIZE(fsl_i2c_speed_map); i++) - if (fsl_i2c_speed_map[i].divider >= divider) { - u8 fdr; #ifdef __PPC__ - u8 dfsr; + u8 dfsr, fdr = 0x31; /* Default if no FDR found */ + /* a, b and dfsr matches identifiers A,B and C respectively in AN2919 */ + unsigned short a, b, ga, gb; + unsigned long c_div, est_div; + #ifdef CONFIG_FSL_I2C_CUSTOM_DFSR - dfsr = CONFIG_FSL_I2C_CUSTOM_DFSR; + dfsr = CONFIG_FSL_I2C_CUSTOM_DFSR; #else - dfsr = fsl_i2c_speed_map[i].dfsr; -#endif - writeb(dfsr, &dev->dfsrr); /* set default filter */ + /* Condition 1: dfsr <= 50/T */ + dfsr = (5 * (i2c_clk / 1000)) / 100000; #endif #ifdef CONFIG_FSL_I2C_CUSTOM_FDR - fdr = CONFIG_FSL_I2C_CUSTOM_FDR; - speed = i2c_clk / divider; /* Fake something */ + fdr = CONFIG_FSL_I2C_CUSTOM_FDR; + speed = i2c_clk / divider; /* Fake something */ +#else + debug("Requested speed:%d, i2c_clk:%d\n", speed, i2c_clk); + if (!dfsr) + dfsr = 1; + + est_div = ~0; + for (ga = 0x4, a = 10; a <= 30; ga++, a += 2) { + for (gb = 0; gb < 8; gb++) { + b = 16 << gb; + c_div = b * (a + ((3*dfsr)/b)*2); + if ((c_div > divider) && (c_div < est_div)) { + unsigned short bin_gb, bin_ga; + + est_div = c_div; + bin_gb = gb << 2; + bin_ga = (ga & 0x3) | ((ga & 0x4) << 3); + fdr = bin_gb | bin_ga; + speed = i2c_clk / est_div; + debug("FDR:0x%.2x, div:%ld, ga:0x%x, gb:0x%x, " + "a:%d, b:%d, speed:%d\n", + fdr, est_div, ga, gb, a, b, speed); + /* Condition 2 not accounted for */ + debug("Tr <= %d ns\n", + (b - 3 * dfsr) * 1000000 / + (i2c_clk / 1000)); + } + } + if (a == 20) + a += 2; + if (a == 24) + a += 4; + } + debug("divider:%d, est_div:%ld, DFSR:%d\n", divider, est_div, dfsr); + debug("FDR:0x%.2x, speed:%d\n", fdr, speed); +#endif + writeb(dfsr, &dev->dfsrr); /* set default filter */ + writeb(fdr, &dev->fdr); /* set bus speed */ #else + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(fsl_i2c_speed_map); i++) + if (fsl_i2c_speed_map[i].divider >= divider) { + u8 fdr; + fdr = fsl_i2c_speed_map[i].fdr; speed = i2c_clk / fsl_i2c_speed_map[i].divider; -#endif writeb(fdr, &dev->fdr); /* set bus speed */ break; } - +#endif return speed; } -void -i2c_init(int speed, int slaveadd) +static unsigned int get_i2c_clock(int bus) { - struct fsl_i2c *dev; - unsigned int temp; + if (bus) + return gd->arch.i2c2_clk; /* I2C2 clock */ + else + return gd->arch.i2c1_clk; /* I2C1 clock */ +} + +static int fsl_i2c_fixup(const struct fsl_i2c *dev) +{ + const unsigned long long timeout = usec2ticks(CONFIG_I2C_MBB_TIMEOUT); + unsigned long long timeval = 0; + int ret = -1; + unsigned int flags = 0; + +#ifdef CONFIG_SYS_FSL_ERRATUM_I2C_A004447 + unsigned int svr = get_svr(); + if ((SVR_SOC_VER(svr) == SVR_8548 && IS_SVR_REV(svr, 3, 1)) || + (SVR_REV(svr) <= CONFIG_SYS_FSL_A004447_SVR_REV)) + flags = I2C_CR_BIT6; +#endif + + writeb(I2C_CR_MEN | I2C_CR_MSTA, &dev->cr); + + timeval = get_ticks(); + while (!(readb(&dev->sr) & I2C_SR_MBB)) { + if ((get_ticks() - timeval) > timeout) + goto err; + } + + if (readb(&dev->sr) & I2C_SR_MAL) { + /* SDA is stuck low */ + writeb(0, &dev->cr); + udelay(100); + writeb(I2C_CR_MSTA | flags, &dev->cr); + writeb(I2C_CR_MEN | I2C_CR_MSTA | flags, &dev->cr); + } + + readb(&dev->dr); + + timeval = get_ticks(); + while (!(readb(&dev->sr) & I2C_SR_MIF)) { + if ((get_ticks() - timeval) > timeout) + goto err; + } + ret = 0; + +err: + writeb(I2C_CR_MEN | flags, &dev->cr); + writeb(0, &dev->sr); + udelay(100); + + return ret; +} + +static void fsl_i2c_init(struct i2c_adapter *adap, int speed, int slaveadd) +{ + const struct fsl_i2c *dev; + const unsigned long long timeout = usec2ticks(CONFIG_I2C_MBB_TIMEOUT); + unsigned long long timeval; #ifdef CONFIG_SYS_I2C_INIT_BOARD - /* call board specific i2c bus reset routine before accessing the */ - /* environment, which might be in a chip on that bus. For details */ - /* about this problem see doc/I2C_Edge_Conditions. */ + /* Call board specific i2c bus reset routine before accessing the + * environment, which might be in a chip on that bus. For details + * about this problem see doc/I2C_Edge_Conditions. + */ i2c_init_board(); #endif - dev = (struct fsl_i2c *) (CONFIG_SYS_IMMR + CONFIG_SYS_I2C_OFFSET); - - writeb(0, &dev->cr); /* stop I2C controller */ - udelay(5); /* let it shutdown in peace */ - temp = set_i2c_bus_speed(dev, gd->i2c1_clk, speed); - if (gd->flags & GD_FLG_RELOC) - i2c_bus_speed[0] = temp; - writeb(slaveadd << 1, &dev->adr); /* write slave address */ - writeb(0x0, &dev->sr); /* clear status register */ - writeb(I2C_CR_MEN, &dev->cr); /* start I2C controller */ - -#ifdef CONFIG_SYS_I2C2_OFFSET - dev = (struct fsl_i2c *) (CONFIG_SYS_IMMR + CONFIG_SYS_I2C2_OFFSET); - - writeb(0, &dev->cr); /* stop I2C controller */ - udelay(5); /* let it shutdown in peace */ - temp = set_i2c_bus_speed(dev, gd->i2c2_clk, speed); - if (gd->flags & GD_FLG_RELOC) - i2c_bus_speed[1] = temp; - writeb(slaveadd << 1, &dev->adr); /* write slave address */ - writeb(0x0, &dev->sr); /* clear status register */ - writeb(I2C_CR_MEN, &dev->cr); /* start I2C controller */ + dev = (struct fsl_i2c *)i2c_dev[adap->hwadapnr]; + + writeb(0, &dev->cr); /* stop I2C controller */ + udelay(5); /* let it shutdown in peace */ + set_i2c_bus_speed(dev, get_i2c_clock(adap->hwadapnr), speed); + writeb(slaveadd << 1, &dev->adr);/* write slave address */ + writeb(0x0, &dev->sr); /* clear status register */ + writeb(I2C_CR_MEN, &dev->cr); /* start I2C controller */ + + timeval = get_ticks(); + while (readb(&dev->sr) & I2C_SR_MBB) { + if ((get_ticks() - timeval) < timeout) + continue; + + if (fsl_i2c_fixup(dev)) + debug("i2c_init: BUS#%d failed to init\n", + adap->hwadapnr); + + break; + } + +#ifdef CONFIG_SYS_I2C_BOARD_LATE_INIT + /* Call board specific i2c bus reset routine AFTER the bus has been + * initialized. Use either this callpoint or i2c_init_board; + * which is called before i2c_init operations. + * For details about this problem see doc/I2C_Edge_Conditions. + */ + i2c_board_late_init(); #endif } static int -i2c_wait4bus(void) +i2c_wait4bus(struct i2c_adapter *adap) { + struct fsl_i2c *dev = (struct fsl_i2c *)i2c_dev[adap->hwadapnr]; unsigned long long timeval = get_ticks(); const unsigned long long timeout = usec2ticks(CONFIG_I2C_MBB_TIMEOUT); - while (readb(&i2c_dev[i2c_bus_num]->sr) & I2C_SR_MBB) { + while (readb(&dev->sr) & I2C_SR_MBB) { if ((get_ticks() - timeval) > timeout) return -1; } @@ -246,20 +319,21 @@ i2c_wait4bus(void) } static __inline__ int -i2c_wait(int write) +i2c_wait(struct i2c_adapter *adap, int write) { u32 csr; unsigned long long timeval = get_ticks(); const unsigned long long timeout = usec2ticks(CONFIG_I2C_TIMEOUT); + struct fsl_i2c *dev = (struct fsl_i2c *)i2c_dev[adap->hwadapnr]; do { - csr = readb(&i2c_dev[i2c_bus_num]->sr); + csr = readb(&dev->sr); if (!(csr & I2C_SR_MIF)) continue; /* Read again to allow register to stabilise */ - csr = readb(&i2c_dev[i2c_bus_num]->sr); + csr = readb(&dev->sr); - writeb(0x0, &i2c_dev[i2c_bus_num]->sr); + writeb(0x0, &dev->sr); if (csr & I2C_SR_MAL) { debug("i2c_wait: MAL\n"); @@ -284,29 +358,32 @@ i2c_wait(int write) } static __inline__ int -i2c_write_addr (u8 dev, u8 dir, int rsta) +i2c_write_addr(struct i2c_adapter *adap, u8 dev, u8 dir, int rsta) { + struct fsl_i2c *device = (struct fsl_i2c *)i2c_dev[adap->hwadapnr]; + writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_MTX | (rsta ? I2C_CR_RSTA : 0), - &i2c_dev[i2c_bus_num]->cr); + &device->cr); - writeb((dev << 1) | dir, &i2c_dev[i2c_bus_num]->dr); + writeb((dev << 1) | dir, &device->dr); - if (i2c_wait(I2C_WRITE_BIT) < 0) + if (i2c_wait(adap, I2C_WRITE_BIT) < 0) return 0; return 1; } static __inline__ int -__i2c_write(u8 *data, int length) +__i2c_write(struct i2c_adapter *adap, u8 *data, int length) { + struct fsl_i2c *dev = (struct fsl_i2c *)i2c_dev[adap->hwadapnr]; int i; for (i = 0; i < length; i++) { - writeb(data[i], &i2c_dev[i2c_bus_num]->dr); + writeb(data[i], &dev->dr); - if (i2c_wait(I2C_WRITE_BIT) < 0) + if (i2c_wait(adap, I2C_WRITE_BIT) < 0) break; } @@ -314,75 +391,113 @@ __i2c_write(u8 *data, int length) } static __inline__ int -__i2c_read(u8 *data, int length) +__i2c_read(struct i2c_adapter *adap, u8 *data, int length) { + struct fsl_i2c *dev = (struct fsl_i2c *)i2c_dev[adap->hwadapnr]; int i; writeb(I2C_CR_MEN | I2C_CR_MSTA | ((length == 1) ? I2C_CR_TXAK : 0), - &i2c_dev[i2c_bus_num]->cr); + &dev->cr); /* dummy read */ - readb(&i2c_dev[i2c_bus_num]->dr); + readb(&dev->dr); for (i = 0; i < length; i++) { - if (i2c_wait(I2C_READ_BIT) < 0) + if (i2c_wait(adap, I2C_READ_BIT) < 0) break; /* Generate ack on last next to last byte */ if (i == length - 2) writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_TXAK, - &i2c_dev[i2c_bus_num]->cr); + &dev->cr); - /* Generate stop on last byte */ + /* Do not generate stop on last byte */ if (i == length - 1) - writeb(I2C_CR_MEN | I2C_CR_TXAK, &i2c_dev[i2c_bus_num]->cr); + writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_MTX, + &dev->cr); - data[i] = readb(&i2c_dev[i2c_bus_num]->dr); + data[i] = readb(&dev->dr); } return i; } -int -i2c_read(u8 dev, uint addr, int alen, u8 *data, int length) +static int +fsl_i2c_read(struct i2c_adapter *adap, u8 dev, uint addr, int alen, u8 *data, + int length) { + struct fsl_i2c *device = (struct fsl_i2c *)i2c_dev[adap->hwadapnr]; int i = -1; /* signal error */ u8 *a = (u8*)&addr; + int len = alen * -1; + + if (i2c_wait4bus(adap) < 0) + return -1; - if (i2c_wait4bus() >= 0 - && i2c_write_addr(dev, I2C_WRITE_BIT, 0) != 0 - && __i2c_write(&a[4 - alen], alen) == alen) - i = 0; /* No error so far */ + /* To handle the need of I2C devices that require to write few bytes + * (more than 4 bytes of address as in the case of else part) + * of data before reading, Negative equivalent of length(bytes to write) + * is passed, but used the +ve part of len for writing data + */ + if (alen < 0) { + /* Generate a START and send the Address and + * the Tx Bytes to the slave. + * "START: Address: Write bytes data[len]" + * IF part supports writing any number of bytes in contrast + * to the else part, which supports writing address offset + * of upto 4 bytes only. + * bytes that need to be written are passed in + * "data", which will eventually keep the data READ, + * after writing the len bytes out of it + */ + if (i2c_write_addr(adap, dev, I2C_WRITE_BIT, 0) != 0) + i = __i2c_write(adap, data, len); + + if (i != len) + return -1; + + if (length && i2c_write_addr(adap, dev, I2C_READ_BIT, 1) != 0) + i = __i2c_read(adap, data, length); + } else { + if ((!length || alen > 0) && + i2c_write_addr(adap, dev, I2C_WRITE_BIT, 0) != 0 && + __i2c_write(adap, &a[4 - alen], alen) == alen) + i = 0; /* No error so far */ + + if (length && + i2c_write_addr(adap, dev, I2C_READ_BIT, alen ? 1 : 0) != 0) + i = __i2c_read(adap, data, length); + } - if (length - && i2c_write_addr(dev, I2C_READ_BIT, 1) != 0) - i = __i2c_read(data, length); + writeb(I2C_CR_MEN, &device->cr); - if (length && i2c_wait4bus()) /* Wait until STOP */ + if (i2c_wait4bus(adap)) /* Wait until STOP */ debug("i2c_read: wait4bus timed out\n"); - writeb(I2C_CR_MEN, &i2c_dev[i2c_bus_num]->cr); - if (i == length) return 0; return -1; } -int -i2c_write(u8 dev, uint addr, int alen, u8 *data, int length) +static int +fsl_i2c_write(struct i2c_adapter *adap, u8 dev, uint addr, int alen, + u8 *data, int length) { + struct fsl_i2c *device = (struct fsl_i2c *)i2c_dev[adap->hwadapnr]; int i = -1; /* signal error */ u8 *a = (u8*)&addr; - if (i2c_wait4bus() >= 0 - && i2c_write_addr(dev, I2C_WRITE_BIT, 0) != 0 - && __i2c_write(&a[4 - alen], alen) == alen) { - i = __i2c_write(data, length); + if (i2c_wait4bus(adap) < 0) + return -1; + + if (i2c_write_addr(adap, dev, I2C_WRITE_BIT, 0) != 0 && + __i2c_write(adap, &a[4 - alen], alen) == alen) { + i = __i2c_write(adap, data, length); } - writeb(I2C_CR_MEN, &i2c_dev[i2c_bus_num]->cr); - if (i2c_wait4bus()) /* Wait until STOP */ + writeb(I2C_CR_MEN, &device->cr); + if (i2c_wait4bus(adap)) /* Wait until STOP */ debug("i2c_write: wait4bus timed out\n"); if (i == length) @@ -391,71 +506,54 @@ i2c_write(u8 dev, uint addr, int alen, u8 *data, int length) return -1; } -int -i2c_probe(uchar chip) +static int +fsl_i2c_probe(struct i2c_adapter *adap, uchar chip) { + struct fsl_i2c *dev = (struct fsl_i2c *)i2c_dev[adap->hwadapnr]; /* For unknow reason the controller will ACK when * probing for a slave with the same address, so skip * it. */ - if (chip == (readb(&i2c_dev[i2c_bus_num]->adr) >> 1)) + if (chip == (readb(&dev->adr) >> 1)) return -1; - return i2c_read(chip, 0, 0, NULL, 0); + return fsl_i2c_read(adap, chip, 0, 0, NULL, 0); } -int i2c_set_bus_num(unsigned int bus) +static unsigned int fsl_i2c_set_bus_speed(struct i2c_adapter *adap, + unsigned int speed) { -#if defined(CONFIG_I2C_MUX) - if (bus < CONFIG_SYS_MAX_I2C_BUS) { - i2c_bus_num = bus; - } else { - int ret; + struct fsl_i2c *dev = (struct fsl_i2c *)i2c_dev[adap->hwadapnr]; - ret = i2x_mux_select_mux(bus); - if (ret) - return ret; - i2c_bus_num = 0; - } - i2c_bus_num_mux = bus; -#else -#ifdef CONFIG_SYS_I2C2_OFFSET - if (bus > 1) { -#else - if (bus > 0) { -#endif - return -1; - } - - i2c_bus_num = bus; -#endif - return 0; -} - -int i2c_set_bus_speed(unsigned int speed) -{ - unsigned int i2c_clk = (i2c_bus_num == 1) ? gd->i2c2_clk : gd->i2c1_clk; - - writeb(0, &i2c_dev[i2c_bus_num]->cr); /* stop controller */ - i2c_bus_speed[i2c_bus_num] = - set_i2c_bus_speed(i2c_dev[i2c_bus_num], i2c_clk, speed); - writeb(I2C_CR_MEN, &i2c_dev[i2c_bus_num]->cr); /* start controller */ + writeb(0, &dev->cr); /* stop controller */ + set_i2c_bus_speed(dev, get_i2c_clock(adap->hwadapnr), speed); + writeb(I2C_CR_MEN, &dev->cr); /* start controller */ return 0; } -unsigned int i2c_get_bus_num(void) -{ -#if defined(CONFIG_I2C_MUX) - return i2c_bus_num_mux; -#else - return i2c_bus_num; +/* + * Register fsl i2c adapters + */ +U_BOOT_I2C_ADAP_COMPLETE(fsl_0, fsl_i2c_init, fsl_i2c_probe, fsl_i2c_read, + fsl_i2c_write, fsl_i2c_set_bus_speed, + CONFIG_SYS_FSL_I2C_SPEED, CONFIG_SYS_FSL_I2C_SLAVE, + 0) +#ifdef CONFIG_SYS_FSL_I2C2_OFFSET +U_BOOT_I2C_ADAP_COMPLETE(fsl_1, fsl_i2c_init, fsl_i2c_probe, fsl_i2c_read, + fsl_i2c_write, fsl_i2c_set_bus_speed, + CONFIG_SYS_FSL_I2C2_SPEED, CONFIG_SYS_FSL_I2C2_SLAVE, + 1) +#endif +#ifdef CONFIG_SYS_FSL_I2C3_OFFSET +U_BOOT_I2C_ADAP_COMPLETE(fsl_2, fsl_i2c_init, fsl_i2c_probe, fsl_i2c_read, + fsl_i2c_write, fsl_i2c_set_bus_speed, + CONFIG_SYS_FSL_I2C3_SPEED, CONFIG_SYS_FSL_I2C3_SLAVE, + 2) +#endif +#ifdef CONFIG_SYS_FSL_I2C4_OFFSET +U_BOOT_I2C_ADAP_COMPLETE(fsl_3, fsl_i2c_init, fsl_i2c_probe, fsl_i2c_read, + fsl_i2c_write, fsl_i2c_set_bus_speed, + CONFIG_SYS_FSL_I2C4_SPEED, CONFIG_SYS_FSL_I2C4_SLAVE, + 3) #endif -} - -unsigned int i2c_get_bus_speed(void) -{ - return i2c_bus_speed[i2c_bus_num]; -} - -#endif /* CONFIG_HARD_I2C */