X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=drivers%2Fgpio%2Fat91_gpio.c;h=8e52e3dad0af181e0df608466134ea3ba0660bef;hb=cfa414aefd530bba4dd5105c77615104c96367bf;hp=be2a0268e849a89f103d4877f4551f3e9b20d2c0;hpb=86592f60595f5dcebde01c9a4135485fbf2a61d6;p=oweals%2Fu-boot.git

diff --git a/drivers/gpio/at91_gpio.c b/drivers/gpio/at91_gpio.c
index be2a0268e8..8e52e3dad0 100644
--- a/drivers/gpio/at91_gpio.c
+++ b/drivers/gpio/at91_gpio.c
@@ -1,59 +1,72 @@
 /*
- * Memory Setup stuff - taken from blob memsetup.S
+ * Copyright (C) 2013 Bo Shen <voice.shen@atmel.com>
  *
  * Copyright (C) 2009 Jens Scharsig (js_at_ng@scharsoft.de)
  *
  *  Copyright (C) 2005 HP Labs
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * WARNING:
- *
- * As the code is right now, it expects all PIO ports A,B,C,...
- * to be evenly spaced in the memory map:
- * ATMEL_BASE_PIOA + port * sizeof at91pio_t
- * This might not necessaryly be true in future Atmel SoCs.
- * This code should be fixed to use a pointer array to the ports.
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #include <config.h>
 #include <common.h>
+#include <dm.h>
 #include <asm/io.h>
-#include <asm/sizes.h>
+#include <linux/sizes.h>
+#include <asm/gpio.h>
 #include <asm/arch/hardware.h>
 #include <asm/arch/at91_pio.h>
 
+#define GPIO_PER_BANK	32
+
+static struct at91_port *at91_pio_get_port(unsigned port)
+{
+	switch (port) {
+	case AT91_PIO_PORTA:
+		return (struct at91_port *)ATMEL_BASE_PIOA;
+	case AT91_PIO_PORTB:
+		return (struct at91_port *)ATMEL_BASE_PIOB;
+	case AT91_PIO_PORTC:
+		return (struct at91_port *)ATMEL_BASE_PIOC;
+#if (ATMEL_PIO_PORTS > 3)
+	case AT91_PIO_PORTD:
+		return (struct at91_port *)ATMEL_BASE_PIOD;
+#if (ATMEL_PIO_PORTS > 4)
+	case AT91_PIO_PORTE:
+		return (struct at91_port *)ATMEL_BASE_PIOE;
+#endif
+#endif
+	default:
+		printf("Error: at91_gpio: Fail to get PIO base!\n");
+		return NULL;
+	}
+}
+
+static void at91_set_port_pullup(struct at91_port *at91_port, unsigned offset,
+				 int use_pullup)
+{
+	u32 mask;
+
+	mask = 1 << offset;
+	if (use_pullup)
+		writel(mask, &at91_port->puer);
+	else
+		writel(mask, &at91_port->pudr);
+	writel(mask, &at91_port->per);
+}
+
 int at91_set_pio_pullup(unsigned port, unsigned pin, int use_pullup)
 {
-	at91_pio_t	*pio = (at91_pio_t *) ATMEL_BASE_PIOA;
-	u32		mask;
+	struct at91_port *at91_port = at91_pio_get_port(port);
+
+#if defined(CPU_HAS_PIO3)
+	if (use_pullup)
+		at91_set_pio_pulldown(port, pin, 0);
+#endif
+
+	if (at91_port && (pin < GPIO_PER_BANK))
+		at91_set_port_pullup(at91_port, pin, use_pullup);
 
-	if ((port < ATMEL_PIO_PORTS) && (pin < 32)) {
-		mask = 1 << pin;
-		if (use_pullup)
-			writel(1 << pin, &pio->port[port].puer);
-		else
-			writel(1 << pin, &pio->port[port].pudr);
-		writel(mask, &pio->port[port].per);
-	}
 	return 0;
 }
 
@@ -62,15 +75,16 @@ int at91_set_pio_pullup(unsigned port, unsigned pin, int use_pullup)
  */
 int at91_set_pio_periph(unsigned port, unsigned pin, int use_pullup)
 {
-	at91_pio_t	*pio = (at91_pio_t *) ATMEL_BASE_PIOA;
-	u32		mask;
+	struct at91_port *at91_port = at91_pio_get_port(port);
+	u32 mask;
 
-	if ((port < ATMEL_PIO_PORTS) && (pin < 32)) {
+	if (at91_port && (pin < GPIO_PER_BANK)) {
 		mask = 1 << pin;
-		writel(mask, &pio->port[port].idr);
+		writel(mask, &at91_port->idr);
 		at91_set_pio_pullup(port, pin, use_pullup);
-		writel(mask, &pio->port[port].per);
+		writel(mask, &at91_port->per);
 	}
+
 	return 0;
 }
 
@@ -79,16 +93,24 @@ int at91_set_pio_periph(unsigned port, unsigned pin, int use_pullup)
  */
 int at91_set_a_periph(unsigned port, unsigned pin, int use_pullup)
 {
-	at91_pio_t	*pio = (at91_pio_t *) ATMEL_BASE_PIOA;
-	u32		mask;
+	struct at91_port *at91_port = at91_pio_get_port(port);
+	u32 mask;
 
-	if ((port < ATMEL_PIO_PORTS) && (pin < 32)) {
+	if (at91_port && (pin < GPIO_PER_BANK)) {
 		mask = 1 << pin;
-		writel(mask, &pio->port[port].idr);
+		writel(mask, &at91_port->idr);
 		at91_set_pio_pullup(port, pin, use_pullup);
-		writel(mask, &pio->port[port].asr);
-		writel(mask, &pio->port[port].pdr);
+#if defined(CPU_HAS_PIO3)
+		writel(readl(&at91_port->abcdsr1) & ~mask,
+		       &at91_port->abcdsr1);
+		writel(readl(&at91_port->abcdsr2) & ~mask,
+		       &at91_port->abcdsr2);
+#else
+		writel(mask, &at91_port->asr);
+#endif
+		writel(mask, &at91_port->pdr);
 	}
+
 	return 0;
 }
 
@@ -97,58 +119,137 @@ int at91_set_a_periph(unsigned port, unsigned pin, int use_pullup)
  */
 int at91_set_b_periph(unsigned port, unsigned pin, int use_pullup)
 {
-	at91_pio_t	*pio = (at91_pio_t *) ATMEL_BASE_PIOA;
-	u32		mask;
+	struct at91_port *at91_port = at91_pio_get_port(port);
+	u32 mask;
 
-	if ((port < ATMEL_PIO_PORTS) && (pin < 32)) {
+	if (at91_port && (pin < GPIO_PER_BANK)) {
 		mask = 1 << pin;
-		writel(mask, &pio->port[port].idr);
+		writel(mask, &at91_port->idr);
 		at91_set_pio_pullup(port, pin, use_pullup);
-		writel(mask, &pio->port[port].bsr);
-		writel(mask, &pio->port[port].pdr);
+#if defined(CPU_HAS_PIO3)
+		writel(readl(&at91_port->abcdsr1) | mask,
+		       &at91_port->abcdsr1);
+		writel(readl(&at91_port->abcdsr2) & ~mask,
+		       &at91_port->abcdsr2);
+#else
+		writel(mask, &at91_port->bsr);
+#endif
+		writel(mask, &at91_port->pdr);
 	}
+
 	return 0;
 }
 
+#if defined(CPU_HAS_PIO3)
 /*
- * mux the pin to the gpio controller (instead of "A" or "B" peripheral), and
- * configure it for an input.
+ * mux the pin to the "C" internal peripheral role.
  */
-int at91_set_pio_input(unsigned port, u32 pin, int use_pullup)
+int at91_set_c_periph(unsigned port, unsigned pin, int use_pullup)
+{
+	struct at91_port *at91_port = at91_pio_get_port(port);
+	u32 mask;
+
+	if (at91_port && (pin < GPIO_PER_BANK)) {
+		mask = 1 << pin;
+		writel(mask, &at91_port->idr);
+		at91_set_pio_pullup(port, pin, use_pullup);
+		writel(readl(&at91_port->abcdsr1) & ~mask,
+		       &at91_port->abcdsr1);
+		writel(readl(&at91_port->abcdsr2) | mask,
+		       &at91_port->abcdsr2);
+		writel(mask, &at91_port->pdr);
+	}
+
+	return 0;
+}
+
+/*
+ * mux the pin to the "D" internal peripheral role.
+ */
+int at91_set_d_periph(unsigned port, unsigned pin, int use_pullup)
 {
-	at91_pio_t	*pio = (at91_pio_t *) ATMEL_BASE_PIOA;
-	u32		mask;
+	struct at91_port *at91_port = at91_pio_get_port(port);
+	u32 mask;
 
-	if ((port < ATMEL_PIO_PORTS) && (pin < 32)) {
+	if (at91_port && (pin < GPIO_PER_BANK)) {
 		mask = 1 << pin;
-		writel(mask, &pio->port[port].idr);
+		writel(mask, &at91_port->idr);
 		at91_set_pio_pullup(port, pin, use_pullup);
-		writel(mask, &pio->port[port].odr);
-		writel(mask, &pio->port[port].per);
+		writel(readl(&at91_port->abcdsr1) | mask,
+		       &at91_port->abcdsr1);
+		writel(readl(&at91_port->abcdsr2) | mask,
+		       &at91_port->abcdsr2);
+		writel(mask, &at91_port->pdr);
 	}
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_DM_GPIO
+static bool at91_get_port_output(struct at91_port *at91_port, int offset)
+{
+	u32 mask, val;
+
+	mask = 1 << offset;
+	val = readl(&at91_port->osr);
+	return val & mask;
+}
+#endif
+
+static void at91_set_port_input(struct at91_port *at91_port, int offset,
+				int use_pullup)
+{
+	u32 mask;
+
+	mask = 1 << offset;
+	writel(mask, &at91_port->idr);
+	at91_set_port_pullup(at91_port, offset, use_pullup);
+	writel(mask, &at91_port->odr);
+	writel(mask, &at91_port->per);
+}
+
+/*
+ * mux the pin to the gpio controller (instead of "A" or "B" peripheral), and
+ * configure it for an input.
+ */
+int at91_set_pio_input(unsigned port, u32 pin, int use_pullup)
+{
+	struct at91_port *at91_port = at91_pio_get_port(port);
+
+	if (at91_port && (pin < GPIO_PER_BANK))
+		at91_set_port_input(at91_port, pin, use_pullup);
+
 	return 0;
 }
 
+static void at91_set_port_output(struct at91_port *at91_port, int offset,
+				 int value)
+{
+	u32 mask;
+
+	mask = 1 << offset;
+	writel(mask, &at91_port->idr);
+	writel(mask, &at91_port->pudr);
+	if (value)
+		writel(mask, &at91_port->sodr);
+	else
+		writel(mask, &at91_port->codr);
+	writel(mask, &at91_port->oer);
+	writel(mask, &at91_port->per);
+}
+
 /*
  * mux the pin to the gpio controller (instead of "A" or "B" peripheral),
  * and configure it for an output.
  */
 int at91_set_pio_output(unsigned port, u32 pin, int value)
 {
-	at91_pio_t	*pio = (at91_pio_t *) ATMEL_BASE_PIOA;
-	u32		mask;
+	struct at91_port *at91_port = at91_pio_get_port(port);
+
+	if (at91_port && (pin < GPIO_PER_BANK))
+		at91_set_port_output(at91_port, pin, value);
 
-	if ((port < ATMEL_PIO_PORTS) && (pin < 32)) {
-		mask = 1 << pin;
-		writel(mask, &pio->port[port].idr);
-		writel(mask, &pio->port[port].pudr);
-		if (value)
-			writel(mask, &pio->port[port].sodr);
-		else
-			writel(mask, &pio->port[port].codr);
-		writel(mask, &pio->port[port].oer);
-		writel(mask, &pio->port[port].per);
-	}
 	return 0;
 }
 
@@ -157,68 +258,278 @@ int at91_set_pio_output(unsigned port, u32 pin, int value)
  */
 int at91_set_pio_deglitch(unsigned port, unsigned pin, int is_on)
 {
-	at91_pio_t	*pio = (at91_pio_t *) ATMEL_BASE_PIOA;
-	u32		mask;
+	struct at91_port *at91_port = at91_pio_get_port(port);
+	u32 mask;
 
-	if ((port < ATMEL_PIO_PORTS) && (pin < 32)) {
+	if (at91_port && (pin < GPIO_PER_BANK)) {
 		mask = 1 << pin;
-		if (is_on)
-			writel(mask, &pio->port[port].ifer);
-		else
-			writel(mask, &pio->port[port].ifdr);
+		if (is_on) {
+#if defined(CPU_HAS_PIO3)
+			writel(mask, &at91_port->ifscdr);
+#endif
+			writel(mask, &at91_port->ifer);
+		} else {
+			writel(mask, &at91_port->ifdr);
+		}
 	}
+
+	return 0;
+}
+
+#if defined(CPU_HAS_PIO3)
+/*
+ * enable/disable the debounce filter.
+ */
+int at91_set_pio_debounce(unsigned port, unsigned pin, int is_on, int div)
+{
+	struct at91_port *at91_port = at91_pio_get_port(port);
+	u32 mask;
+
+	if (at91_port && (pin < GPIO_PER_BANK)) {
+		mask = 1 << pin;
+		if (is_on) {
+			writel(mask, &at91_port->ifscer);
+			writel(div & PIO_SCDR_DIV, &at91_port->scdr);
+			writel(mask, &at91_port->ifer);
+		} else {
+			writel(mask, &at91_port->ifdr);
+		}
+	}
+
 	return 0;
 }
 
+/*
+ * enable/disable the pull-down.
+ * If pull-up already enabled while calling the function, we disable it.
+ */
+int at91_set_pio_pulldown(unsigned port, unsigned pin, int is_on)
+{
+	struct at91_port *at91_port = at91_pio_get_port(port);
+	u32 mask;
+
+	if (at91_port && (pin < GPIO_PER_BANK)) {
+		mask = 1 << pin;
+		if (is_on) {
+			at91_set_pio_pullup(port, pin, 0);
+			writel(mask, &at91_port->ppder);
+		} else
+			writel(mask, &at91_port->ppddr);
+	}
+
+	return 0;
+}
+
+/*
+ * disable Schmitt trigger
+ */
+int at91_set_pio_disable_schmitt_trig(unsigned port, unsigned pin)
+{
+	struct at91_port *at91_port = at91_pio_get_port(port);
+	u32 mask;
+
+	if (at91_port && (pin < GPIO_PER_BANK)) {
+		mask = 1 << pin;
+		writel(readl(&at91_port->schmitt) | mask,
+		       &at91_port->schmitt);
+	}
+
+	return 0;
+}
+#endif
+
 /*
  * enable/disable the multi-driver. This is only valid for output and
  * allows the output pin to run as an open collector output.
  */
 int at91_set_pio_multi_drive(unsigned port, unsigned pin, int is_on)
 {
-	at91_pio_t	*pio = (at91_pio_t *) ATMEL_BASE_PIOA;
-	u32		mask;
+	struct at91_port *at91_port = at91_pio_get_port(port);
+	u32 mask;
 
-	if ((port < ATMEL_PIO_PORTS) && (pin < 32)) {
+	if (at91_port && (pin < GPIO_PER_BANK)) {
 		mask = 1 << pin;
 		if (is_on)
-			writel(mask, &pio->port[port].mder);
+			writel(mask, &at91_port->mder);
 		else
-			writel(mask, &pio->port[port].mddr);
+			writel(mask, &at91_port->mddr);
 	}
+
 	return 0;
 }
 
+static void at91_set_port_value(struct at91_port *at91_port, int offset,
+				int value)
+{
+	u32 mask;
+
+	mask = 1 << offset;
+	if (value)
+		writel(mask, &at91_port->sodr);
+	else
+		writel(mask, &at91_port->codr);
+}
+
 /*
  * assuming the pin is muxed as a gpio output, set its value.
  */
 int at91_set_pio_value(unsigned port, unsigned pin, int value)
 {
-	at91_pio_t	*pio = (at91_pio_t *) ATMEL_BASE_PIOA;
-	u32		mask;
+	struct at91_port *at91_port = at91_pio_get_port(port);
+
+	if (at91_port && (pin < GPIO_PER_BANK))
+		at91_set_port_value(at91_port, pin, value);
 
-	if ((port < ATMEL_PIO_PORTS) && (pin < 32)) {
-		mask = 1 << pin;
-		if (value)
-			writel(mask, &pio->port[port].sodr);
-		else
-			writel(mask, &pio->port[port].codr);
-	}
 	return 0;
 }
 
+static int at91_get_port_value(struct at91_port *at91_port, int offset)
+{
+	u32 pdsr = 0, mask;
+
+	mask = 1 << offset;
+	pdsr = readl(&at91_port->pdsr) & mask;
+
+	return pdsr != 0;
+}
 /*
  * read the pin's value (works even if it's not muxed as a gpio).
  */
 int at91_get_pio_value(unsigned port, unsigned pin)
 {
-	u32		pdsr = 0;
-	at91_pio_t	*pio = (at91_pio_t *) ATMEL_BASE_PIOA;
-	u32		mask;
+	struct at91_port *at91_port = at91_pio_get_port(port);
 
-	if ((port < ATMEL_PIO_PORTS) && (pin < 32)) {
-		mask = 1 << pin;
-		pdsr = readl(&pio->port[port].pdsr) & mask;
-	}
-	return pdsr != 0;
+	if (at91_port && (pin < GPIO_PER_BANK))
+		return at91_get_port_value(at91_port, pin);
+
+	return 0;
+}
+
+#ifndef CONFIG_DM_GPIO
+/* Common GPIO API */
+
+int gpio_request(unsigned gpio, const char *label)
+{
+	return 0;
+}
+
+int gpio_free(unsigned gpio)
+{
+	return 0;
+}
+
+int gpio_direction_input(unsigned gpio)
+{
+	at91_set_pio_input(at91_gpio_to_port(gpio),
+			   at91_gpio_to_pin(gpio), 0);
+	return 0;
+}
+
+int gpio_direction_output(unsigned gpio, int value)
+{
+	at91_set_pio_output(at91_gpio_to_port(gpio),
+			    at91_gpio_to_pin(gpio), value);
+	return 0;
 }
+
+int gpio_get_value(unsigned gpio)
+{
+	return at91_get_pio_value(at91_gpio_to_port(gpio),
+				  at91_gpio_to_pin(gpio));
+}
+
+int gpio_set_value(unsigned gpio, int value)
+{
+	at91_set_pio_value(at91_gpio_to_port(gpio),
+			   at91_gpio_to_pin(gpio), value);
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_DM_GPIO
+
+struct at91_port_priv {
+	struct at91_port *regs;
+};
+
+/* set GPIO pin 'gpio' as an input */
+static int at91_gpio_direction_input(struct udevice *dev, unsigned offset)
+{
+	struct at91_port_priv *port = dev_get_priv(dev);
+
+	at91_set_port_input(port->regs, offset, 0);
+
+	return 0;
+}
+
+/* set GPIO pin 'gpio' as an output, with polarity 'value' */
+static int at91_gpio_direction_output(struct udevice *dev, unsigned offset,
+				       int value)
+{
+	struct at91_port_priv *port = dev_get_priv(dev);
+
+	at91_set_port_output(port->regs, offset, value);
+
+	return 0;
+}
+
+/* read GPIO IN value of pin 'gpio' */
+static int at91_gpio_get_value(struct udevice *dev, unsigned offset)
+{
+	struct at91_port_priv *port = dev_get_priv(dev);
+
+	return at91_get_port_value(port->regs, offset);
+}
+
+/* write GPIO OUT value to pin 'gpio' */
+static int at91_gpio_set_value(struct udevice *dev, unsigned offset,
+			       int value)
+{
+	struct at91_port_priv *port = dev_get_priv(dev);
+
+	at91_set_port_value(port->regs, offset, value);
+
+	return 0;
+}
+
+static int at91_gpio_get_function(struct udevice *dev, unsigned offset)
+{
+	struct at91_port_priv *port = dev_get_priv(dev);
+
+	/* GPIOF_FUNC is not implemented yet */
+	if (at91_get_port_output(port->regs, offset))
+		return GPIOF_OUTPUT;
+	else
+		return GPIOF_INPUT;
+}
+
+static const struct dm_gpio_ops gpio_at91_ops = {
+	.direction_input	= at91_gpio_direction_input,
+	.direction_output	= at91_gpio_direction_output,
+	.get_value		= at91_gpio_get_value,
+	.set_value		= at91_gpio_set_value,
+	.get_function		= at91_gpio_get_function,
+};
+
+static int at91_gpio_probe(struct udevice *dev)
+{
+	struct at91_port_priv *port = dev_get_priv(dev);
+	struct at91_port_platdata *plat = dev_get_platdata(dev);
+	struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
+
+	uc_priv->bank_name = plat->bank_name;
+	uc_priv->gpio_count = GPIO_PER_BANK;
+	port->regs = (struct at91_port *)plat->base_addr;
+
+	return 0;
+}
+
+U_BOOT_DRIVER(gpio_at91) = {
+	.name	= "gpio_at91",
+	.id	= UCLASS_GPIO,
+	.ops	= &gpio_at91_ops,
+	.probe	= at91_gpio_probe,
+	.priv_auto_alloc_size = sizeof(struct at91_port_priv),
+};
+#endif