X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=drivers%2Fe1000.h;h=0fbdc90b1f4c1523213fa0d3cb508b653e2e9f66;hb=8a316c9b6215266b8f5f7bbae5ee12e8b8afac83;hp=ba05ac0750dbfdeb9c33c22c657881ee8e03b830;hpb=682011ff6968198da14b89e40d9f55b00f6d91f7;p=oweals%2Fu-boot.git diff --git a/drivers/e1000.h b/drivers/e1000.h index ba05ac0750..0fbdc90b1f 100644 --- a/drivers/e1000.h +++ b/drivers/e1000.h @@ -1,25 +1,25 @@ /******************************************************************************* - + Copyright(c) 1999 - 2002 Intel Corporation. All rights reserved. - - This program is free software; you can redistribute it and/or modify it - under the terms of the GNU General Public License as published by the Free - Software Foundation; either version 2 of the License, or (at your option) + + This program is free software; you can redistribute it and/or modify it + under the terms of the GNU General Public License as published by the Free + Software Foundation; either version 2 of the License, or (at your option) any later version. - - This program is distributed in the hope that it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + + This program is distributed in the hope that it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. - + You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., 59 + this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - + The full GNU General Public License is included in this distribution in the file called LICENSE. - + Contact Information: Linux NICS Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 @@ -251,7 +251,7 @@ struct e1000_phy_stats { /* This defines the bits that are set in the Interrupt Mask * Set/Read Register. Each bit is documented below: * o RXDMT0 = Receive Descriptor Minimum Threshold hit (ring 0) - * o RXSEQ = Receive Sequence Error + * o RXSEQ = Receive Sequence Error */ #define POLL_IMS_ENABLE_MASK ( \ E1000_IMS_RXDMT0 | \ @@ -275,7 +275,7 @@ struct e1000_phy_stats { /* The number of high/low register pairs in the RAR. The RAR (Receive Address * Registers) holds the directed and multicast addresses that we monitor. We * reserve one of these spots for our directed address, allowing us room for - * E1000_RAR_ENTRIES - 1 multicast addresses. + * E1000_RAR_ENTRIES - 1 multicast addresses. */ #define E1000_RAR_ENTRIES 16 @@ -475,7 +475,7 @@ struct e1000_ffvt_entry { /* Register Set. (82543, 82544) * * Registers are defined to be 32 bits and should be accessed as 32 bit values. - * These registers are physically located on the NIC, but are mapped into the + * These registers are physically located on the NIC, but are mapped into the * host memory address space. * * RW - register is both readable and writable @@ -1248,7 +1248,7 @@ struct e1000_hw { #define E1000_MANC_IPV6_EN 0x00000800 /* Enable IPv6 */ #define E1000_MANC_SNAP_EN 0x00001000 /* Accept LLC/SNAP */ #define E1000_MANC_ARP_EN 0x00002000 /* Enable ARP Request Filtering */ -#define E1000_MANC_NEIGHBOR_EN 0x00004000 /* Enable Neighbor Discovery +#define E1000_MANC_NEIGHBOR_EN 0x00004000 /* Enable Neighbor Discovery * Filtering */ #define E1000_MANC_TCO_RESET 0x00010000 /* TCO Reset Occurred */ #define E1000_MANC_RCV_TCO_EN 0x00020000 /* Receive TCO Packets Enabled */ @@ -1287,9 +1287,9 @@ struct e1000_hw { #define ID_LED_RESERVED_0000 0x0000 #define ID_LED_RESERVED_FFFF 0xFFFF #define ID_LED_DEFAULT ((ID_LED_OFF1_ON2 << 12) | \ - (ID_LED_OFF1_OFF2 << 8) | \ - (ID_LED_DEF1_DEF2 << 4) | \ - (ID_LED_DEF1_DEF2)) + (ID_LED_OFF1_OFF2 << 8) | \ + (ID_LED_DEF1_DEF2 << 4) | \ + (ID_LED_DEF1_DEF2)) #define ID_LED_DEF1_DEF2 0x1 #define ID_LED_DEF1_ON2 0x2 #define ID_LED_DEF1_OFF2 0x3 @@ -1410,26 +1410,26 @@ struct e1000_hw { /* The number of bits that we need to shift right to move the "pause" * bits from the EEPROM (bits 13:12) to the "pause" (bits 8:7) field - * in the TXCW register + * in the TXCW register */ #define PAUSE_SHIFT 5 /* The number of bits that we need to shift left to move the "SWDPIO" * bits from the EEPROM (bits 8:5) to the "SWDPIO" (bits 25:22) field - * in the CTRL register + * in the CTRL register */ #define SWDPIO_SHIFT 17 /* The number of bits that we need to shift left to move the "SWDPIO_EXT" * bits from the EEPROM word F (bits 7:4) to the bits 11:8 of The * Extended CTRL register. - * in the CTRL register + * in the CTRL register */ #define SWDPIO__EXT_SHIFT 4 /* The number of bits that we need to shift left to move the "ILOS" * bit from the EEPROM (bit 4) to the "ILOS" (bit 7) field - * in the CTRL register + * in the CTRL register */ #define ILOS_SHIFT 3 @@ -1446,7 +1446,7 @@ struct e1000_hw { /* TBI_ACCEPT macro definition: * * This macro requires: - * adapter = a pointer to struct e1000_hw + * adapter = a pointer to struct e1000_hw * status = the 8 bit status field of the RX descriptor with EOP set * error = the 8 bit error field of the RX descriptor with EOP set * length = the sum of all the length fields of the RX descriptors that @@ -1455,7 +1455,7 @@ struct e1000_hw { * max_frame_length = the maximum frame length we want to accept. * min_frame_length = the minimum frame length we want to accept. * - * This macro is a conditional that should be used in the interrupt + * This macro is a conditional that should be used in the interrupt * handler's Rx processing routine when RxErrors have been detected. * * Typical use: @@ -1475,10 +1475,10 @@ struct e1000_hw { (((errors) & E1000_RXD_ERR_FRAME_ERR_MASK) == E1000_RXD_ERR_CE) && \ ((last_byte) == CARRIER_EXTENSION) && \ (((status) & E1000_RXD_STAT_VP) ? \ - (((length) > ((adapter)->min_frame_size - VLAN_TAG_SIZE)) && \ - ((length) <= ((adapter)->max_frame_size + 1))) : \ - (((length) > (adapter)->min_frame_size) && \ - ((length) <= ((adapter)->max_frame_size + VLAN_TAG_SIZE + 1))))) + (((length) > ((adapter)->min_frame_size - VLAN_TAG_SIZE)) && \ + ((length) <= ((adapter)->max_frame_size + 1))) : \ + (((length) > (adapter)->min_frame_size) && \ + ((length) <= ((adapter)->max_frame_size + VLAN_TAG_SIZE + 1))))) /* Structures, enums, and macros for the PHY */ @@ -1589,7 +1589,7 @@ struct e1000_hw { * 0 = cannot comply with msg */ #define NPTX_MSG_PAGE 0x2000 /* formatted(1)/unformatted(0) pg */ -#define NPTX_NEXT_PAGE 0x8000 /* 1 = addition NP will follow +#define NPTX_NEXT_PAGE 0x8000 /* 1 = addition NP will follow * 0 = sending last NP */ @@ -1598,13 +1598,13 @@ struct e1000_hw { #define LP_RNPR_TOGGLE 0x0800 /* Toggles between exchanges * of different NP */ -#define LP_RNPR_ACKNOWLDGE2 0x1000 /* 1 = will comply with msg +#define LP_RNPR_ACKNOWLDGE2 0x1000 /* 1 = will comply with msg * 0 = cannot comply with msg */ #define LP_RNPR_MSG_PAGE 0x2000 /* formatted(1)/unformatted(0) pg */ #define LP_RNPR_ACKNOWLDGE 0x4000 /* 1 = ACK / 0 = NO ACK */ #define LP_RNPR_NEXT_PAGE 0x8000 /* 1 = addition NP will follow - * 0 = sending last NP + * 0 = sending last NP */ /* 1000BASE-T Control Register */ @@ -1651,18 +1651,18 @@ struct e1000_hw { #define M88E1000_PSCR_JABBER_DISABLE 0x0001 /* 1=Jabber Function disabled */ #define M88E1000_PSCR_POLARITY_REVERSAL 0x0002 /* 1=Polarity Reversal enabled */ #define M88E1000_PSCR_SQE_TEST 0x0004 /* 1=SQE Test enabled */ -#define M88E1000_PSCR_CLK125_DISABLE 0x0010 /* 1=CLK125 low, +#define M88E1000_PSCR_CLK125_DISABLE 0x0010 /* 1=CLK125 low, * 0=CLK125 toggling */ #define M88E1000_PSCR_MDI_MANUAL_MODE 0x0000 /* MDI Crossover Mode bits 6:5 */ /* Manual MDI configuration */ #define M88E1000_PSCR_MDIX_MANUAL_MODE 0x0020 /* Manual MDIX configuration */ #define M88E1000_PSCR_AUTO_X_1000T 0x0040 /* 1000BASE-T: Auto crossover, - * 100BASE-TX/10BASE-T: + * 100BASE-TX/10BASE-T: * MDI Mode */ -#define M88E1000_PSCR_AUTO_X_MODE 0x0060 /* Auto crossover enabled - * all speeds. +#define M88E1000_PSCR_AUTO_X_MODE 0x0060 /* Auto crossover enabled + * all speeds. */ #define M88E1000_PSCR_10BT_EXT_DIST_ENABLE 0x0080 /* 1=Enable Extended 10BASE-T distance @@ -1703,7 +1703,7 @@ struct e1000_hw { #define M88E1000_EPSCR_DOWN_NO_IDLE 0x8000 /* 1=Lost lock detect enabled. * Will assert lost lock and bring * link down if idle not seen - * within 1ms in 1000BASE-T + * within 1ms in 1000BASE-T */ /* Number of times we will attempt to autonegotiate before downshifting if we * are the master */