X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=drivers%2Fcore%2FKconfig;h=e8ba20ca82d362316e9edfc3e4e6967f04ea7559;hb=83a462a5e3560800b3cdfd7253d2de7791968331;hp=788f8b739bf40f8aca95f98466f9a3f77f03639e;hpb=fcd78fa604d994477fd209b9faab4a974b103250;p=oweals%2Fu-boot.git diff --git a/drivers/core/Kconfig b/drivers/core/Kconfig index 788f8b739b..e8ba20ca82 100644 --- a/drivers/core/Kconfig +++ b/drivers/core/Kconfig @@ -16,10 +16,24 @@ config SPL_DM suitable malloc() implementation. If you are not using the full malloc() enabled by CONFIG_SYS_SPL_MALLOC_START, consider using CONFIG_SYS_MALLOC_SIMPLE. In that case you - must provide CONFIG_SYS_MALLOC_F_LEN to set the size. + must provide CONFIG_SPL_SYS_MALLOC_F_LEN to set the size. In most cases driver model will only allocate a few uclasses and devices in SPL, so 1KB should be enable. See - CONFIG_SYS_MALLOC_F_LEN for more details on how to enable it. + CONFIG_SPL_SYS_MALLOC_F_LEN for more details on how to enable it. + +config TPL_DM + bool "Enable Driver Model for TPL" + depends on DM && TPL + help + Enable driver model in TPL. You will need to provide a + suitable malloc() implementation. If you are not using the + full malloc() enabled by CONFIG_SYS_SPL_MALLOC_START, + consider using CONFIG_SYS_MALLOC_SIMPLE. In that case you + must provide CONFIG_SPL_SYS_MALLOC_F_LEN to set the size. + In most cases driver model will only allocate a few uclasses + and devices in SPL, so 1KB should be enough. See + CONFIG_SPL_SYS_MALLOC_F_LEN for more details on how to enable it. + Disable this for very small implementations. config DM_WARN bool "Enable warnings in driver model" @@ -31,6 +45,12 @@ config DM_WARN This will cause dm_warn() to be compiled out - it will do nothing when called. +config DM_DEBUG + bool "Enable debug messages in driver model core" + depends on DM + help + Say Y here if you want to compile in debug messages in DM core. + config DM_DEVICE_REMOVE bool "Support device removal" depends on DM @@ -57,6 +77,15 @@ config DM_SEQ_ALIAS bool "Support numbered aliases in device tree" depends on DM default y + help + Most boards will have a '/aliases' node containing the path to + numbered devices (e.g. serial0 = &serial0). This feature can be + disabled if it is not required. + +config SPL_DM_SEQ_ALIAS + bool "Support numbered aliases in device tree in SPL" + depends on DM + default n help Most boards will have a '/aliases' node containing the path to numbered devices (e.g. serial0 = &serial0). This feature can be @@ -72,6 +101,26 @@ config REGMAP support any bus type (I2C, SPI) but so far this only supports direct memory access. +config SPL_REGMAP + bool "Support register maps in SPL" + depends on SPL_DM + help + Hardware peripherals tend to have one or more sets of registers + which can be accessed to control the hardware. A register map + models this with a simple read/write interface. It can in principle + support any bus type (I2C, SPI) but so far this only supports + direct memory access. + +config TPL_REGMAP + bool "Support register maps in TPL" + depends on TPL_DM + help + Hardware peripherals tend to have one or more sets of registers + which can be accessed to control the hardware. A register map + models this with a simple read/write interface. It can in principle + support any bus type (I2C, SPI) but so far this only supports + direct memory access. + config SYSCON bool "Support system controllers" depends on REGMAP @@ -81,6 +130,24 @@ config SYSCON by this uclass, including accessing registers via regmap and assigning a unique number to each. +config SPL_SYSCON + bool "Support system controllers in SPL" + depends on SPL_REGMAP + help + Many SoCs have a number of system controllers which are dealt with + as a group by a single driver. Some common functionality is provided + by this uclass, including accessing registers via regmap and + assigning a unique number to each. + +config TPL_SYSCON + bool "Support system controllers in TPL" + depends on TPL_REGMAP + help + Many SoCs have a number of system controllers which are dealt with + as a group by a single driver. Some common functionality is provided + by this uclass, including accessing registers via regmap and + assigning a unique number to each. + config DEVRES bool "Managed device resources" depends on DM @@ -105,4 +172,76 @@ config DEBUG_DEVRES If you are unsure about this, Say N here. +config SIMPLE_BUS + bool "Support simple-bus driver" + depends on DM && OF_CONTROL + default y + help + Supports the 'simple-bus' driver, which is used on some systems. + +config SPL_SIMPLE_BUS + bool "Support simple-bus driver in SPL" + depends on SPL_DM && SPL_OF_CONTROL + default y + help + Supports the 'simple-bus' driver, which is used on some systems + in SPL. + +config OF_TRANSLATE + bool "Translate addresses using fdt_translate_address" + depends on DM && OF_CONTROL + default y + help + If this option is enabled, the reg property will be translated + using the fdt_translate_address() function. This is necessary + on some platforms (e.g. MVEBU) using complex "ranges" + properties in many nodes. As this translation is not handled + correctly in the default simple_bus_translate() function. + + If this option is not enabled, simple_bus_translate() will be + used for the address translation. This function is faster and + smaller in size than fdt_translate_address(). + +config SPL_OF_TRANSLATE + bool "Translate addresses using fdt_translate_address in SPL" + depends on SPL_DM && SPL_OF_CONTROL + default n + help + If this option is enabled, the reg property will be translated + using the fdt_translate_address() function. This is necessary + on some platforms (e.g. MVEBU) using complex "ranges" + properties in many nodes. As this translation is not handled + correctly in the default simple_bus_translate() function. + + If this option is not enabled, simple_bus_translate() will be + used for the address translation. This function is faster and + smaller in size than fdt_translate_address(). + +config OF_ISA_BUS + bool + depends on OF_TRANSLATE + help + Is this option is enabled then support for the ISA bus will + be included for addresses read from DT. This is something that + should be known to be required or not based upon the board + being targetted, and whether or not it makes use of an ISA bus. + + The bus is matched based upon its node name equalling "isa". The + busses #address-cells should equal 2, with the first cell being + used to hold flags & flag 0x1 indicating that the address range + should be accessed using I/O port in/out accessors. The second + cell holds the offset into ISA bus address space. The #size-cells + property should equal 1, and of course holds the size of the + address range used by a device. + + If this option is not enabled then support for the ISA bus is + not included and any such busses used in DT will be treated as + typical simple-bus compatible busses. This will lead to + mistranslation of device addresses, so ensure that this is + enabled if your board does include an ISA bus. + +config DM_DEV_READ_INLINE + bool + default y if !OF_LIVE + endmenu