X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=drivers%2Fclk%2FKconfig;h=ff60fc5c45f5dfb3a4facc223a1e42812a864255;hb=c40b6df87fc0193a7184ada9f53aaf57cdec0cdf;hp=9fcde39b71f71870ae36e57c1707547e5275641c;hpb=82d72a1b9967cff4908f22c57536c3660f794401;p=oweals%2Fu-boot.git

diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 9fcde39b71..ff60fc5c45 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -12,7 +12,7 @@ config CLK
 
 config SPL_CLK
 	bool "Enable clock support in SPL"
-	depends on CLK
+	depends on CLK && SPL && SPL_DM
 	help
 	  The clock subsystem adds a small amount of overhead to the image.
 	  If this is acceptable and you have a need to use clock drivers in
@@ -20,4 +20,107 @@ config SPL_CLK
 	  setting up clocks within SPL, and allows the same drivers to be
 	  used as U-Boot proper.
 
+config TPL_CLK
+	bool "Enable clock support in TPL"
+	depends on CLK && TPL_DM
+	help
+	  The clock subsystem adds a small amount of overhead to the image.
+	  If this is acceptable and you have a need to use clock drivers in
+	  SPL, enable this option. It might provide a cleaner interface to
+	  setting up clocks within TPL, and allows the same drivers to be
+	  used as U-Boot proper.
+
+config CLK_BCM6345
+	bool "Clock controller driver for BCM6345"
+	depends on CLK && ARCH_BMIPS
+	default y
+	help
+	  This clock driver adds support for enabling and disabling peripheral
+	  clocks on BCM6345 SoCs. HW has no rate changing capabilities.
+
+config CLK_BOSTON
+	def_bool y if TARGET_BOSTON
+	depends on CLK
+	select REGMAP
+	select SYSCON
+	help
+	  Enable this to support the clocks
+
+config CLK_STM32F
+	bool "Enable clock driver support for STM32F family"
+	depends on CLK && (STM32F7 || STM32F4)
+	default y
+	help
+	  This clock driver adds support for RCC clock management
+	  for STM32F4 and STM32F7 SoCs.
+
+config CLK_TI_SCI
+	bool "TI System Control Interface (TI SCI) clock driver"
+	depends on CLK && TI_SCI_PROTOCOL && OF_CONTROL
+	help
+	  This enables the clock driver support over TI System Control Interface
+	  available on some new TI's SoCs. If you wish to use clock resources
+	  managed by the TI System Controller, say Y here. Otherwise, say N.
+
+config CLK_HSDK
+	bool "Enable cgu clock driver for HSDK"
+	depends on CLK
+	help
+	  Enable this to support the cgu clocks on Synopsys ARC HSDK
+
+config CLK_VEXPRESS_OSC
+	bool "Enable driver for Arm Versatile Express OSC clock generators"
+	depends on CLK && VEXPRESS_CONFIG
+	help
+	  This clock driver adds support for clock generators present on
+	  Arm Versatile Express platforms.
+
+config CLK_ZYNQ
+	bool "Enable clock driver support for Zynq"
+	depends on CLK && ARCH_ZYNQ
+	default y
+	help
+	  This clock driver adds support for clock realted settings for
+	  Zynq platform.
+
+config CLK_ZYNQMP
+	bool "Enable clock driver support for ZynqMP"
+	depends on ARCH_ZYNQMP
+	help
+	  This clock driver adds support for clock realted settings for
+	  ZynqMP platform.
+
+config CLK_STM32MP1
+	bool "Enable RCC clock driver for STM32MP1"
+	depends on ARCH_STM32MP && CLK
+	default y
+	help
+	  Enable the STM32 clock (RCC) driver. Enable support for
+	  manipulating STM32MP1's on-SoC clocks.
+
+source "drivers/clk/at91/Kconfig"
+source "drivers/clk/exynos/Kconfig"
+source "drivers/clk/imx/Kconfig"
+source "drivers/clk/mvebu/Kconfig"
+source "drivers/clk/owl/Kconfig"
+source "drivers/clk/renesas/Kconfig"
+source "drivers/clk/sunxi/Kconfig"
+source "drivers/clk/sifive/Kconfig"
+source "drivers/clk/tegra/Kconfig"
+source "drivers/clk/uniphier/Kconfig"
+
+config ICS8N3QV01
+	bool "Enable ICS8N3QV01 VCXO driver"
+	depends on CLK
+	help
+	  Support for the ICS8N3QV01 Quad-Frequency VCXO (Voltage-Controlled
+	  Crystal Oscillator). The output frequency can be programmed via an
+	  I2C interface.
+
+config CLK_MPC83XX
+	bool "Enable MPC83xx clock driver"
+	depends on CLK
+	help
+	  Support for the clock driver of the MPC83xx series of SoCs.
+
 endmenu