X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=drivers%2FMakefile;h=ad5cbae7caa565dfc0ec0fd7cc18148a3677afef;hb=652b269468efe15053a989353aed9723c2484c55;hp=3c96524de6336854347b5db2e255cb2e6198f7cb;hpb=93d3320417b16f331d5edb87409cd7a347c4eeaa;p=oweals%2Fu-boot.git

diff --git a/drivers/Makefile b/drivers/Makefile
index 3c96524de6..ad5cbae7ca 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -1,24 +1,80 @@
-obj-$(CONFIG_DM) += core/
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-$(CONFIG_$(SPL_)DM)		+= core/
+obj-$(CONFIG_$(SPL_)CLK)	+= clk/
+obj-$(CONFIG_$(SPL_)LED)	+= led/
+obj-$(CONFIG_$(SPL_)PINCTRL)	+= pinctrl/
+obj-$(CONFIG_$(SPL_)RAM)	+= ram/
+
+ifdef CONFIG_SPL_BUILD
+
+obj-$(CONFIG_SPL_CRYPTO_SUPPORT) += crypto/
+obj-$(CONFIG_SPL_I2C_SUPPORT) += i2c/
+obj-$(CONFIG_SPL_GPIO_SUPPORT) += gpio/
+obj-$(CONFIG_SPL_MMC_SUPPORT) += mmc/
+obj-$(CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT) += ddr/fsl/
+obj-$(CONFIG_ARMADA_38X) += ddr/marvell/a38x/
+obj-$(CONFIG_ARMADA_XP) += ddr/marvell/axp/
+obj-$(CONFIG_ALTERA_SDRAM) += ddr/altera/
+obj-$(CONFIG_SPL_SERIAL_SUPPORT) += serial/
+obj-$(CONFIG_SPL_SPI_SUPPORT) += spi/
+obj-$(CONFIG_SPL_POWER_SUPPORT) += power/ power/pmic/
+obj-$(CONFIG_SPL_POWER_SUPPORT) += power/regulator/
+obj-$(CONFIG_SPL_DRIVERS_MISC_SUPPORT) += misc/
+obj-$(CONFIG_SPL_MTD_SUPPORT) += mtd/
+obj-$(CONFIG_SPL_NAND_SUPPORT) += mtd/nand/
+obj-$(CONFIG_SPL_ONENAND_SUPPORT) += mtd/onenand/
+obj-$(CONFIG_SPL_SPI_FLASH_SUPPORT) += mtd/spi/
+obj-$(CONFIG_SPL_UBI) += mtd/ubispl/
+obj-$(CONFIG_SPL_DMA_SUPPORT) += dma/
+obj-$(CONFIG_SPL_ETH_SUPPORT) += net/
+obj-$(CONFIG_SPL_ETH_SUPPORT) += net/phy/
+obj-$(CONFIG_SPL_USBETH_SUPPORT) += net/phy/
+obj-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += usb/musb-new/
+obj-$(CONFIG_SPL_USBETH_SUPPORT) += usb/gadget/
+obj-$(CONFIG_SPL_WATCHDOG_SUPPORT) += watchdog/
+obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += usb/host/
+obj-$(CONFIG_OMAP_USB_PHY) += usb/phy/
+obj-$(CONFIG_SPL_SATA_SUPPORT) += block/
+obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += block/
+obj-$(CONFIG_SPL_MMC_SUPPORT) += block/
+
+else
+
+obj-y += adc/
 obj-$(CONFIG_DM_DEMO) += demo/
 obj-$(CONFIG_BIOSEMU) += bios_emulator/
 obj-y += block/
 obj-$(CONFIG_BOOTCOUNT_LIMIT) += bootcount/
+obj-$(CONFIG_CPU) += cpu/
 obj-y += crypto/
 obj-$(CONFIG_FPGA) += fpga/
 obj-y += hwmon/
 obj-y += misc/
 obj-y += pcmcia/
 obj-y += dfu/
+obj-$(CONFIG_X86) += pch/
 obj-y += rtc/
 obj-y += sound/
+obj-y += spmi/
+obj-y += timer/
 obj-y += tpm/
 obj-y += twserial/
 obj-y += video/
 obj-y += watchdog/
 obj-$(CONFIG_QE) += qe/
 obj-$(CONFIG_U_QE) += qe/
+obj-y += mailbox/
 obj-y += memory/
 obj-y += pwm/
+obj-y += reset/
 obj-y += input/
 # SOC specific infrastructure drivers.
 obj-y += soc/
+obj-$(CONFIG_REMOTEPROC) += remoteproc/
+obj-y += thermal/
+
+obj-$(CONFIG_MACH_PIC32) += ddr/microchip/
+endif