X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=drivers%2FMakefile;h=a7bba3ed564b0dfc4035be3254a81abd1612a9f0;hb=826eb74015fafda92f1fd35e91aeec76a8099539;hp=276e5ee4d7eedfd6c3be5d8f802b6a614d80771f;hpb=e0ed8332fa2fe684b4c8ba1caab991663730cbf0;p=oweals%2Fu-boot.git

diff --git a/drivers/Makefile b/drivers/Makefile
index 276e5ee4d7..a7bba3ed56 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -2,18 +2,28 @@
 
 obj-$(CONFIG_$(SPL_TPL_)CLK) += clk/
 obj-$(CONFIG_$(SPL_TPL_)DM) += core/
+obj-$(CONFIG_$(SPL_TPL_)DFU) += dfu/
+obj-$(CONFIG_$(SPL_TPL_)GPIO_SUPPORT) += gpio/
 obj-$(CONFIG_$(SPL_TPL_)DRIVERS_MISC_SUPPORT) += misc/ sysreset/ firmware/
 obj-$(CONFIG_$(SPL_TPL_)I2C_SUPPORT) += i2c/
+obj-$(CONFIG_$(SPL_TPL_)INPUT) += input/
 obj-$(CONFIG_$(SPL_TPL_)LED) += led/
 obj-$(CONFIG_$(SPL_TPL_)MMC_SUPPORT) += mmc/
-obj-$(CONFIG_$(SPL_TPL_)NAND_SUPPORT) += mtd/nand/
+obj-$(CONFIG_$(SPL_TPL_)NAND_SUPPORT) += mtd/nand/raw/
+obj-$(CONFIG_$(SPL_TPL_)PCH_SUPPORT) += pch/
+obj-$(CONFIG_$(SPL_TPL_)PCI) += pci/
 obj-$(CONFIG_$(SPL_TPL_)PHY) += phy/
 obj-$(CONFIG_$(SPL_TPL_)PINCTRL) += pinctrl/
 obj-$(CONFIG_$(SPL_TPL_)RAM) += ram/
+obj-$(CONFIG_$(SPL_TPL_)RTC_SUPPORT) += rtc/
 obj-$(CONFIG_$(SPL_TPL_)SERIAL_SUPPORT) += serial/
 obj-$(CONFIG_$(SPL_TPL_)SPI_FLASH_SUPPORT) += mtd/spi/
 obj-$(CONFIG_$(SPL_TPL_)SPI_SUPPORT) += spi/
 obj-$(CONFIG_$(SPL_TPL_)TIMER) += timer/
+obj-$(CONFIG_$(SPL_TPL_)VIRTIO) += virtio/
+obj-$(CONFIG_$(SPL_)DM_MAILBOX) += mailbox/
+obj-$(CONFIG_$(SPL_)REMOTEPROC) += remoteproc/
+obj-$(CONFIG_$(SPL_TPL_)TPM) += tpm/
 
 ifndef CONFIG_TPL_BUILD
 ifdef CONFIG_SPL_BUILD
@@ -21,13 +31,14 @@ ifdef CONFIG_SPL_BUILD
 obj-$(CONFIG_SPL_BOOTCOUNT_LIMIT) += bootcount/
 obj-$(CONFIG_SPL_CPU_SUPPORT) += cpu/
 obj-$(CONFIG_SPL_CRYPTO_SUPPORT) += crypto/
-obj-$(CONFIG_SPL_GPIO_SUPPORT) += gpio/
 obj-$(CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT) += ddr/fsl/
 obj-$(CONFIG_ARMADA_38X) += ddr/marvell/a38x/
 obj-$(CONFIG_ARMADA_XP) += ddr/marvell/axp/
 obj-$(CONFIG_ALTERA_SDRAM) += ddr/altera/
+obj-$(CONFIG_ARCH_IMX8M) += ddr/imx/imx8m/
 obj-$(CONFIG_SPL_POWER_SUPPORT) += power/ power/pmic/
 obj-$(CONFIG_SPL_POWER_SUPPORT) += power/regulator/
+obj-$(CONFIG_SPL_POWER_DOMAIN) += power/domain/
 obj-$(CONFIG_SPL_DM_RESET) += reset/
 obj-$(CONFIG_SPL_MTD_SUPPORT) += mtd/
 obj-$(CONFIG_SPL_ONENAND_SUPPORT) += mtd/onenand/
@@ -36,19 +47,15 @@ obj-$(CONFIG_SPL_DMA_SUPPORT) += dma/
 obj-$(CONFIG_SPL_ETH_SUPPORT) += net/
 obj-$(CONFIG_SPL_ETH_SUPPORT) += net/phy/
 obj-$(CONFIG_SPL_USB_ETHER) += net/phy/
-obj-$(CONFIG_SPL_PCI_SUPPORT) += pci/
-obj-$(CONFIG_SPL_PCH_SUPPORT) += pch/
-obj-$(CONFIG_SPL_RTC_SUPPORT) += rtc/
 obj-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += usb/musb-new/
-obj-$(CONFIG_SPL_USB_GADGET_SUPPORT) += usb/gadget/
-obj-$(CONFIG_SPL_USB_GADGET_SUPPORT) += usb/gadget/udc/
-obj-$(CONFIG_SPL_DFU_SUPPORT) += dfu/
+obj-$(CONFIG_SPL_USB_GADGET) += usb/gadget/
+obj-$(CONFIG_SPL_USB_GADGET) += usb/common/
+obj-$(CONFIG_SPL_USB_GADGET) += usb/gadget/udc/
 obj-$(CONFIG_SPL_WATCHDOG_SUPPORT) += watchdog/
 obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += usb/host/
 obj-$(CONFIG_OMAP_USB_PHY) += usb/phy/
 obj-$(CONFIG_SPL_SATA_SUPPORT) += ata/ scsi/
-obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += block/
-obj-$(CONFIG_SPL_MMC_SUPPORT) += block/
+obj-$(CONFIG_HAVE_BLOCK_DEVICE) += block/
 obj-$(CONFIG_SPL_FPGA_SUPPORT) += fpga/
 obj-$(CONFIG_SPL_THERMAL) += thermal/
 
@@ -68,6 +75,7 @@ obj-y += ata/
 obj-$(CONFIG_DM_DEMO) += demo/
 obj-$(CONFIG_BIOSEMU) += bios_emulator/
 obj-y += block/
+obj-y += board/
 obj-$(CONFIG_BOOTCOUNT_LIMIT) += bootcount/
 obj-$(CONFIG_CPU) += cpu/
 obj-y += crypto/
@@ -79,7 +87,7 @@ obj-$(CONFIG_MMC) += mmc/
 obj-$(CONFIG_NVME) += nvme/
 obj-y += pcmcia/
 obj-y += dfu/
-obj-$(CONFIG_X86) += pch/
+obj-$(CONFIG_PCH) += pch/
 obj-y += phy/allwinner/
 obj-y += phy/marvell/
 obj-y += rtc/
@@ -87,7 +95,6 @@ obj-y += scsi/
 obj-y += sound/
 obj-y += spmi/
 obj-y += sysreset/
-obj-y += tpm/
 obj-y += video/
 obj-y += watchdog/
 obj-$(CONFIG_QE) += qe/
@@ -100,8 +107,12 @@ obj-y += input/
 # SOC specific infrastructure drivers.
 obj-y += smem/
 obj-y += soc/
-obj-$(CONFIG_REMOTEPROC) += remoteproc/
 obj-y += thermal/
+obj-$(CONFIG_TEE) += tee/
+obj-y += axi/
+obj-$(CONFIG_W1) += w1/
+obj-$(CONFIG_W1_EEPROM) += w1-eeprom/
 
 obj-$(CONFIG_MACH_PIC32) += ddr/microchip/
+obj-$(CONFIG_DM_HWSPINLOCK) += hwspinlock/
 endif