X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=doc%2FREADME.rockchip;h=e0572c80b9c7d6e22bfc695d0d73fde74f6789d5;hb=76bce10d2131938fcd5b1bbb0479cdb66daffa29;hp=874441c34ecd1a603fbc606d7c27595521a6ec36;hpb=1d5a69684e863adf1d689cfb506ab464f1a1e645;p=oweals%2Fu-boot.git diff --git a/doc/README.rockchip b/doc/README.rockchip index 874441c34e..e0572c80b9 100644 --- a/doc/README.rockchip +++ b/doc/README.rockchip @@ -14,7 +14,7 @@ many Rockchip devices [1] [2]. The current mainline support is experimental only and is not useful for anything. It should provide a base on which to build. -So far only support for the RK3288 is provided. +So far only support for the RK3288 and RK3036 is provided. Prerequisites @@ -22,7 +22,7 @@ Prerequisites You will need: - - Firefly RK3288 baord + - Firefly RK3288 board or something else with a supported RockChip SoC - Power connection to 5V using the supplied micro-USB power cable - Separate USB serial cable attached to your computer and the Firefly (connect to the micro-USB connector below the logo) @@ -39,12 +39,13 @@ Building At present three RK3288 boards are supported: - Firefly RK3288 - use firefly-rk3288 configuration - - Radxa Rock 2 - also uses firefly-rk3288 configuration - - Haier Chromebook - use chromebook_jerry configuration + - Radxa Rock 2 - use rock2 configuration + - Hisense Chromebook - use chromebook_jerry configuration -one RK3036 board is support: +Two RK3036 board are supported: - - EVB RK3036 - use evb-rk3036_defconfig configuration + - EVB RK3036 - use evb-rk3036 configuration + - Kylin - use kylin_rk3036 configuration For example: @@ -52,11 +53,6 @@ For example: (or you can use another cross compiler if you prefer) -Note that the Radxa Rock 2 uses the Firefly configuration for now as -device tree files are not yet available for the Rock 2. Clearly the two -have hardware differences, so this approach will break down as more drivers -are added. - Writing to the board with USB ============================= @@ -71,7 +67,7 @@ Connect your board's OTG port to your computer. To create a suitable image and write it to the board: - ./firefly-rk3288/tools/mkimage -T rkimage -d \ + ./firefly-rk3288/tools/mkimage -n rk3288 -T rkimage -d \ ./firefly-rk3288/spl/u-boot-spl-dtb.bin out && \ cat out | openssl rc4 -K 7c4e0304550509072d2c7b38170d1711 | rkflashtool l @@ -94,7 +90,7 @@ Booting from an SD card To write an image that boots from an SD card (assumed to be /dev/sdc): - ./firefly-rk3288/tools/mkimage -T rksd -d \ + ./firefly-rk3288/tools/mkimage -n rk3288 -T rksd -d \ firefly-rk3288/spl/u-boot-spl-dtb.bin out && \ sudo dd if=out of=/dev/sdc seek=64 && \ sudo dd if=firefly-rk3288/u-boot-dtb.img of=/dev/sdc seek=256 @@ -108,22 +104,25 @@ corresponds with this setting in U-Boot: Put this SD (or micro-SD) card into your board and reset it. You should see something like: - U-Boot SPL 2015.07-rc1-00383-ge345740-dirty (Jun 03 2015 - 11:04:40) - - - U-Boot 2015.07-rc1-00383-ge345740-dirty (Jun 03 2015 - 11:04:40) + U-Boot 2016.01-rc2-00309-ge5bad3b-dirty (Jan 02 2016 - 23:41:59 -0700) + Model: Radxa Rock 2 Square DRAM: 2 GiB - MMC: - Using default environment - - In: serial@ff690000 - Out: serial@ff690000 - Err: serial@ff690000 + MMC: dwmmc@ff0f0000: 0, dwmmc@ff0c0000: 1 + *** Warning - bad CRC, using default environment + + In: serial + Out: vop@ff940000.vidconsole + Err: serial + Net: Net Initialization Skipped + No ethernet found. + Hit any key to stop autoboot: 0 => +If you have an HDMI cable attached you should see a video console. + For evb_rk3036 board: - ./evb-rk3036/tools/mkimage -T rksd -d evb-rk3036/spl/u-boot-spl.bin out && \ + ./evb-rk3036/tools/mkimage -n rk3036 -T rksd -d evb-rk3036/spl/u-boot-spl.bin out && \ cat evb-rk3036/u-boot-dtb.bin >> out && \ sudo dd if=out of=/dev/sdc seek=64 @@ -135,9 +134,10 @@ Booting from SPI To write an image that boots from SPI flash (e.g. for the Haier Chromebook): - ./chromebook_jerry/tools/mkimage -T rkspi -d chromebook_jerry/spl/u-boot-spl-dtb.bin out - dd if=spl.bin of=out.bin bs=128K conv=sync - cat chromebook_jerry/u-boot-dtb.img out.bin + ./chromebook_jerry/tools/mkimage -n rk3288 -T rkspi \ + -d chromebook_jerry/spl/u-boot-spl-dtb.bin spl.bin && \ + dd if=spl.bin of=spl-out.bin bs=128K conv=sync && \ + cat spl-out.bin chromebook_jerry/u-boot-dtb.img >out.bin && \ dd if=out.bin of=out.bin.pad bs=4M conv=sync This converts the SPL image to the required SPI format by adding the Rockchip @@ -174,13 +174,9 @@ Future work Immediate priorities are: -- GPIO (driver exists but is lightly tested) -- I2C (driver exists but is non-functional) - USB host - USB device -- PMIC and regulators (only ACT8846 is supported at present) -- LCD and HDMI -- Run CPU at full speed +- Run CPU at full speed (code exists but we only see ~60 DMIPS maximum) - Ethernet - NAND flash - Support for other Rockchip parts @@ -242,6 +238,12 @@ SPI flash. See above for instructions on how to write a SPI image. +rkmux.py +-------- + +You can use this script to create #defines for SoC register access. See the +script for usage. + Device tree and driver model ----------------------------