X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=doc%2FREADME.rockchip;h=70c8798ed2d07de58f09d8cfe3d681151e729d91;hb=616f03dabacb6c500e8a7ceb920cd08554c9fcae;hp=ca4d6473b0049bac159f6b90689aa6b00c1d5fb4;hpb=8b1d3d19be6918ed4488fb1157deabc6c6c42481;p=oweals%2Fu-boot.git diff --git a/doc/README.rockchip b/doc/README.rockchip index ca4d6473b0..70c8798ed2 100644 --- a/doc/README.rockchip +++ b/doc/README.rockchip @@ -28,10 +28,9 @@ You will need: Building ======== -At present 12 RK3288 boards are supported: +At present 11 RK3288 boards are supported: - EVB RK3288 - use evb-rk3288 configuration - - Fennec RK3288 - use fennec-rk3288 configuration - Firefly RK3288 - use firefly-rk3288 configuration - Hisense Chromebook - use chromebook_jerry configuration - Asus C100P Chromebook - use chromebook_minnie configuration @@ -48,9 +47,17 @@ Two RK3036 boards are supported: - EVB RK3036 - use evb-rk3036 configuration - Kylin - use kylin_rk3036 configuration -One RK3328 board is supported: +Two RK3308 boards are supported: - - EVB RK3328 + - EVB RK3308 - use evb-rk3308 configuration + - ROC-CC-RK3308 - use roc-cc-rk3308 configuration + +Three RK3328 boards are supported: + + - EVB RK3328 - use evb-rk3328_defconfig + - Pine64 Rock64 board - use rock64-rk3328_defconfig + - Firefly / Libre Computer Project ROC-RK3328-CC board - + use roc-cc-rk3328_defconfig Size RK3399 boards are supported (aarch64): @@ -94,7 +101,19 @@ For example: (or you can use another cross compiler if you prefer) -2. To build RK3399 board: +2. To build RK3308 board: + - Get the rkbin + => git clone https://github.com/rockchip-linux/rkbin.git + + - Compile U-Boot + => cd /path/to/u-boot + => export BL31=/path/to/rkbin/bin/rk33/rk3308_bl31_v2.22.elf + => make roc-cc-rk3308_defconfig + => make CROSS_COMPILE=aarch64-linux-gnu- all + => ./tools/mkimage -n rk3308 -T rksd -d /path/to/rkbin/bin/rk33/rk3308_ddr_589MHz_uart2_m0_v1.26.bin idbloader.img + => cat spl/u-boot-spl.bin >> idbloader.img + +3. To build RK3399 board: Option 1: Package the image with Rockchip miniloader: @@ -103,7 +122,6 @@ For example: => cd /path/to/u-boot => make nanopi-neo4-rk3399_defconfig => make - => make u-boot.itb - Get the rkbin @@ -123,10 +141,6 @@ For example: Option 2: Package the image with SPL: - - We need the Python elftools.elf.elffile library for make_fit_atf.py to work - - => sudo apt-get install python-pyelftools - - Export cross compiler path for aarch64 - Compile ATF @@ -137,8 +151,8 @@ For example: => cd arm-trusted-firmware => make CROSS_COMPILE=aarch64-linux-gnu- PLAT=rk3399 bl31 - (copy bl31.bin into U-Boot root dir) - => cp build/rk3399/release/bl31/bl31.bin /path/to/u-boot/bl31-rk3399.bin + (export bl31.bin) + => export BL31=/path/to/arm-trusted-firmware/build/rk3399/release/bl31/bl31.bin For rest of rk3399 boards. @@ -149,8 +163,8 @@ For example: => make realclean => make CROSS_COMPILE=aarch64-linux-gnu- PLAT=rk3399 - (copy bl31.elf into U-Boot root dir) - => cp build/rk3399/release/bl31/bl31.elf /path/to/u-boot + (export bl31.elf) + => export BL31=/path/to/arm-trusted-firmware/build/rk3399/release/bl31/bl31.elf - Compile PMU M0 firmware @@ -162,18 +176,20 @@ For example: (export cross compiler path for Cortex-M0 PMU) => make CROSS_COMPILE=arm-cortex_m0-eabi- - (copy rk3399m0.bin into U-Boot root dir) - => cp rk3399m0.bin /path/to/u-boot + (export rk3399m0.bin) + => export PMUM0=/path/to/rk3399-cortex-m0/rk3399m0.bin - Compile U-Boot => cd /path/to/u-boot => make orangepi-rk3399_defconfig => make - => make u-boot.itb (Get spl/u-boot-spl-dtb.bin, u-boot.itb images and some boards would get - spl/u-boot-spl.bin since it doesn't enable CONFIG_SPL_OF_CONTROL) + spl/u-boot-spl.bin since it doesn't enable CONFIG_SPL_OF_CONTROL + + If TPL enabled on the target, get tpl/u-boot-tpl-dtb.bin or tpl/u-boot-tpl.bin + if CONFIG_TPL_OF_CONTROL not enabled) Writing to the board with USB ============================= @@ -206,6 +222,78 @@ as several other platforms do. However it does not seem to be possible to use the existing boot ROM code from SPL. +Writing to the eMMC with USB on ROC-RK3308-CC +============================================= +For USB to work you must get your board into Bootrom mode, +either by erasing the eMMC or short circuit the GND and D0 +on core board. + +Connect the board to your computer via tyepc. +=> rkdeveloptool db rk3308_loader_v1.26.117.bin +=> rkdeveloptool wl 0x40 idbloader.img +=> rkdeveloptool wl 0x4000 u-boot.itb +=> rkdeveloptool rd + +Then you will see the boot log from Debug UART at baud rate 1500000: +DDR Version V1.26 +REGFB: 0x00000032, 0x00000032 +In +589MHz +DDR3 + Col=10 Bank=8 Row=14 Size=256MB +msch:1 +Returning to boot ROM... + +U-Boot SPL 2020.01-rc1-00225-g34b681327f (Nov 14 2019 - 10:58:04 +0800) +Trying to boot from MMC1 +INFO: Preloader serial: 2 +NOTICE: BL31: v1.3(release):30f1405 +NOTICE: BL31: Built : 17:08:28, Sep 23 2019 +INFO: Lastlog: last=0x100000, realtime=0x102000, size=0x2000 +INFO: ARM GICv2 driver initialized +INFO: Using opteed sec cpu_context! +INFO: boot cpu mask: 1 +INFO: plat_rockchip_pmu_init: pd status 0xe b +INFO: BL31: Initializing runtime services +WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will rK +ERROR: Error initializing runtime service opteed_fast +INFO: BL31: Preparing for EL3 exit to normal world +INFO: Entry point address = 0x600000 +INFO: SPSR = 0x3c9 + + +U-Boot 2020.01-rc1-00225-g34b681327f (Nov 14 2019 - 10:58:47 +0800) + +Model: Firefly ROC-RK3308-CC board +DRAM: 254 MiB +MMC: dwmmc@ff480000: 0, dwmmc@ff490000: 1 +rockchip_dnl_key_pressed read adc key val failed +Net: No ethernet found. +Hit any key to stop autoboot: 0 +Card did not respond to voltage select! +switch to partitions #0, OK +mmc1(part 0) is current device +Scanning mmc 1:4... +Found /extlinux/extlinux.conf +Retrieving file: /extlinux/extlinux.conf +151 bytes read in 3 ms (48.8 KiB/s) +1: kernel-mainline +Retrieving file: /Image +14737920 bytes read in 377 ms (37.3 MiB/s) +append: earlycon=uart8250,mmio32,0xff0c0000 console=ttyS2,1500000n8 +Retrieving file: /rk3308-roc-cc.dtb +28954 bytes read in 4 ms (6.9 MiB/s) +Flattened Device Tree blob at 01f00000 +Booting using the fdt blob at 0x1f00000 +## Loading Device Tree to 000000000df3a000, end 000000000df44119 ... OK + +Starting kernel ... +[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd042] +[ 0.000000] Linux version 5.4.0-rc1-00040-g4dc2d508fa47-dirty (andy@B150) (gcc version 6.3.1 20170404 (Linaro GCC 6.3-209 +[ 0.000000] Machine model: Firefly ROC-RK3308-CC board +[ 0.000000] earlycon: uart8250 at MMIO32 0x00000000ff0c0000 (options '') +[ 0.000000] printk: bootconsole [uart8250] enabled + Booting from an SD card ======================= @@ -254,6 +342,12 @@ You can create the image via the following operations: cat firefly-rk3288/u-boot-dtb.bin >> out && \ sudo dd if=out of=/dev/sdc seek=64 +Or: + ./firefly-rk3288/tools/mkimage -n rk3288 -T rksd -d \ + firefly-rk3288/spl/u-boot-spl-dtb.bin:firefly-rk3288/u-boot-dtb.bin \ + out && \ + sudo dd if=out of=/dev/sdc seek=64 + If you have an HDMI cable attached you should see a video console. For evb_rk3036 board: @@ -261,6 +355,11 @@ For evb_rk3036 board: cat evb-rk3036/u-boot-dtb.bin >> out && \ sudo dd if=out of=/dev/sdc seek=64 +Or: + ./evb-rk3036/tools/mkimage -n rk3036 -T rksd -d \ + evb-rk3036/spl/u-boot-spl.bin:evb-rk3036/u-boot-dtb.bin out && \ + sudo dd if=out of=/dev/sdc seek=64 + Note: rk3036 SDMMC and debug uart use the same iomux, so if you boot from SD, the debug uart must be disabled @@ -278,9 +377,7 @@ As of now TPL is added on Vyasa-RK3288 board. To write an image that boots from an SD card (assumed to be /dev/mmcblk0): - ./tools/mkimage -n rk3288 -T rksd -d ./tpl/u-boot-tpl.bin out && - cat ./spl/u-boot-spl-dtb.bin >> out && - sudo dd if=out of=/dev/mmcblk0 seek=64 && + sudo dd if=idbloader.img of=/dev/mmcblk0 seek=64 && sudo dd if=u-boot-dtb.img of=/dev/mmcblk0 seek=16384 Booting from an SD card on RK3188 @@ -307,6 +404,20 @@ tools/mkimage -n rk3188 -T rksd -d spl/u-boot-spl.bin out truncate -s %2048 u-boot.bin cat u-boot.bin | split -b 512 --filter='openssl rc4 -K 7C4E0304550509072D2C7B38170D1711' >> out +Booting from an SD card on Pine64 Rock64 (RK3328) +================================================= + +For Rock64 rk3328 board the following three parts are required: +TPL, SPL, and the u-boot image tree blob. + + - Write TPL/SPL image at 64 sector + + => sudo dd if=idbloader.img of=/dev/mmcblk0 seek=64 + + - Write u-boot image tree blob at 16384 sector + + => sudo dd if=u-boot.itb of=/dev/mmcblk0 seek=16384 + Booting from an SD card on RK3399 ================================= @@ -455,6 +566,42 @@ Net: eth0: ethernet@fe300000 Hit any key to stop autoboot: 0 => +Option 3: Package the image with TPL: + + - Write tpl+spl at 64th sector + + => sudo dd if=idbloader.img of=/dev/sdc seek=64 + + - Write U-Boot proper at 16384 sector + + => sudo dd if=u-boot.itb of=/dev/sdc seek=16384 + => sync + +Put this SD (or micro-SD) card into your board and reset it. You should see +something like: + +U-Boot TPL board init +Trying to boot from BOOTROM +Returning to boot ROM... + +U-Boot SPL board init +Trying to boot from MMC1 + + +U-Boot 2019.07-rc1-00241-g5b3244767a (May 08 2019 - 10:51:06 +0530) + +Model: Orange Pi RK3399 Board +DRAM: 2 GiB +MMC: dwmmc@fe310000: 2, dwmmc@fe320000: 1, sdhci@fe330000: 0 +Loading Environment from MMC... OK +In: serial@ff1a0000 +Out: serial@ff1a0000 +Err: serial@ff1a0000 +Model: Orange Pi RK3399 Board +Net: eth0: ethernet@fe300000 +Hit any key to stop autoboot: 0 +=> + Using fastboot on rk3288 ======================== - Write GPT partition layout to mmc device which fastboot want to use it to @@ -497,7 +644,7 @@ header and skipping every second 2KB block. Then the U-Boot image is written at offset 128KB and the whole image is padded to 4MB which is the SPI flash size. The position of U-Boot is controlled with this setting in U-Boot: - #define CONFIG_SYS_SPI_U_BOOT_OFFS (128 << 10) + #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 If you have a Dediprog em100pro connected then you can write the image with: