X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=cpu%2Fpxa%2Fi2c.c;h=6b72ba13a09e0d8c47bd2e41af67fbdb457800a5;hb=92b8964bed0d1b779d9e26be4e16755b5c635415;hp=df537c4351f088878d354f27fc337f0692abaf1d;hpb=10a3367955bc2033b288915f8f10d0e507fe2fa1;p=oweals%2Fu-boot.git

diff --git a/cpu/pxa/i2c.c b/cpu/pxa/i2c.c
index df537c4351..6b72ba13a0 100644
--- a/cpu/pxa/i2c.c
+++ b/cpu/pxa/i2c.c
@@ -37,7 +37,7 @@
 #ifdef CONFIG_HARD_I2C
 
 /*
- *	- CFG_I2C_SPEED
+ *	- CONFIG_SYS_I2C_SPEED
  *	- I2C_PXA_SLAVE_ADDR
  */
 
@@ -48,7 +48,7 @@
 /*#define	DEBUG_I2C	1	/###* activate local debugging output  */
 #define I2C_PXA_SLAVE_ADDR	0x1	/* slave pxa unit address           */
 
-#if (CFG_I2C_SPEED == 400000)
+#if (CONFIG_SYS_I2C_SPEED == 400000)
 #define I2C_ICR_INIT	(ICR_FM | ICR_BEIE | ICR_IRFIE | ICR_ITEIE | ICR_GCD | ICR_SCLE)
 #else
 #define I2C_ICR_INIT	(ICR_BEIE | ICR_IRFIE | ICR_ITEIE | ICR_GCD | ICR_SCLE)
@@ -254,7 +254,7 @@ i2c_transfer_finish:
 
 void i2c_init(int speed, int slaveaddr)
 {
-#ifdef CFG_I2C_INIT_BOARD
+#ifdef CONFIG_SYS_I2C_INIT_BOARD
 	/* call board specific i2c bus reset routine before accessing the   */
 	/* environment, which might be in a chip on that bus. For details   */
 	/* about this problem see doc/I2C_Edge_Conditions.                  */
@@ -329,7 +329,7 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
 	 * send memory address bytes;
 	 * alen defines how much bytes we have to send.
 	 */
-	/*addr &= ((1 << CFG_EEPROM_PAGE_WRITE_BITS)-1); */
+	/*addr &= ((1 << CONFIG_SYS_EEPROM_PAGE_WRITE_BITS)-1); */
 	addr_bytes[0] = (u8)((addr >>  0) & 0x000000FF);
 	addr_bytes[1] = (u8)((addr >>  8) & 0x000000FF);
 	addr_bytes[2] = (u8)((addr >> 16) & 0x000000FF);
@@ -455,19 +455,4 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
 
 }
 
-uchar i2c_reg_read (uchar chip, uchar reg)
-{
-	uchar buf;
-
-	PRINTD(("i2c_reg_read(chip=0x%02x, reg=0x%02x)\n",chip,reg));
-	i2c_read(chip, reg, 1, &buf, 1);
-	return (buf);
-}
-
-void  i2c_reg_write(uchar chip, uchar reg, uchar val)
-{
-	PRINTD(("i2c_reg_write(chip=0x%02x, reg=0x%02x, val=0x%02x)\n",chip,reg,val));
-	i2c_write(chip, reg, 1, &val, 1);
-}
-
 #endif	/* CONFIG_HARD_I2C */