X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=cpu%2Fppc4xx%2Ffdt.c;h=c55e1cfbb72f94da0838fac7f341ba19d51b3a8c;hb=06c29422189388f3082c5bab226af17e90d51ee7;hp=3ef30004fb7601b2d0879a0a2920e31d577fee1c;hpb=8697e6a19b10f514511b6a9c86de88bd108c4f8d;p=oweals%2Fu-boot.git diff --git a/cpu/ppc4xx/fdt.c b/cpu/ppc4xx/fdt.c index 3ef30004fb..c55e1cfbb7 100644 --- a/cpu/ppc4xx/fdt.c +++ b/cpu/ppc4xx/fdt.c @@ -1,5 +1,5 @@ /* - * (C) Copyright 2007 + * (C) Copyright 2007-2008 * Stefan Roese, DENX Software Engineering, sr@denx.de. * * See file CREDITS for list of people who contributed to this @@ -21,64 +21,115 @@ * MA 02111-1307 USA */ -/* define DEBUG for debugging output (obviously ;-)) */ -#if 0 -#define DEBUG -#endif - #include #include #include #include #include -#if defined(CONFIG_OF_LIBFDT) +#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) #include #include #include +#include DECLARE_GLOBAL_DATA_PTR; +void __ft_board_setup(void *blob, bd_t *bd) +{ + int rc; + int i; + u32 bxcr; + u32 ranges[EBC_NUM_BANKS * 4]; + u32 *p = ranges; + char *ebc_path = "/plb/opb/ebc"; + + ft_cpu_setup(blob, bd); + + /* + * Read 4xx EBC bus bridge registers to get mappings of the + * peripheral banks into the OPB/PLB address space + */ + for (i = 0; i < EBC_NUM_BANKS; i++) { + mtdcr(ebccfga, EBC_BXCR(i)); + bxcr = mfdcr(ebccfgd); + + if ((bxcr & EBC_BXCR_BU_MASK) != EBC_BXCR_BU_NONE) { + *p++ = i; + *p++ = 0; + *p++ = bxcr & EBC_BXCR_BAS_MASK; + *p++ = EBC_BXCR_BANK_SIZE(bxcr); + } + } + + /* Some 405 PPC's have EBC as direct PLB child in the dts */ + if (fdt_path_offset(blob, "/plb/opb/ebc") < 0) + strcpy(ebc_path, "/plb/ebc"); + rc = fdt_find_and_setprop(blob, ebc_path, "ranges", ranges, + (p - ranges) * sizeof(u32), 1); + if (rc) { + printf("Unable to update property EBC mappings, err=%s\n", + fdt_strerror(rc)); + } +} +void ft_board_setup(void *blob, bd_t *bd) __attribute__((weak, alias("__ft_board_setup"))); + /* - * The aliases needed for this generic etherne MAC address - * fixup function are not in place yet. So don't use this - * approach for now. This will be enabled later. + * Fixup all PCIe nodes by setting the device_type property + * to "pci-endpoint" instead is "pci" for endpoint ports. + * This property will get checked later by the Linux driver + * to properly configure the PCIe port in Linux (again). */ -#undef USES_FDT_ALIASES - -#ifndef USES_FDT_ALIASES -static void do_fixup_macaddr(void *fdt, int offset, const void *val, int i) +void fdt_pcie_setup(void *blob) { + const char *compat = "ibm,plb-pciex"; + const char *prop = "device_type"; + const char *prop_val = "pci-endpoint"; + const u32 *port; + int no; int rc; - debug("Updating node EMAC%d\n", i); + /* Search first PCIe node */ + no = fdt_node_offset_by_compatible(blob, -1, compat); + while (no != -FDT_ERR_NOTFOUND) { + port = fdt_getprop(blob, no, "port", NULL); + if (port == NULL) { + printf("WARNING: could not find port property\n"); + } else { + if (is_end_point(*port)) { + rc = fdt_setprop(blob, no, prop, prop_val, + strlen(prop_val) + 1); + if (rc < 0) + printf("WARNING: could not set %s for %s: %s.\n", + prop, compat, fdt_strerror(rc)); + } + } - rc = fdt_setprop(fdt, offset, "mac-address", val, 6); - if (rc) - printf("Unable to update property %s, err=%s\n", - "mac-address", fdt_strerror(rc)); - rc = fdt_setprop(fdt, offset, "local-mac-address", val, 6); - if (rc) - printf("Unable to update property %s, err=%s\n", - "local-mac-address", fdt_strerror(rc)); + /* Jump to next PCIe node */ + no = fdt_node_offset_by_compatible(blob, no, compat); + } } -#endif /* USES_FDT_ALIASES */ void ft_cpu_setup(void *blob, bd_t *bd) { - char *cpu_path = "/cpus/" OF_CPU; sys_info_t sys_info; - int offset; - int i; get_sys_info(&sys_info); - do_fixup_by_path_u32(blob, cpu_path, "timebase-frequency", bd->bi_intfreq, 1); - do_fixup_by_path_u32(blob, cpu_path, "clock-frequency", bd->bi_intfreq, 1); + do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, "timebase-frequency", + bd->bi_intfreq, 1); + do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, "clock-frequency", + bd->bi_intfreq, 1); do_fixup_by_path_u32(blob, "/plb", "clock-frequency", sys_info.freqPLB, 1); do_fixup_by_path_u32(blob, "/plb/opb", "clock-frequency", sys_info.freqOPB, 1); - do_fixup_by_path_u32(blob, "/plb/opb/ebc", "clock-frequency", - sys_info.freqEBC, 1); + + if (fdt_path_offset(blob, "/plb/opb/ebc") >= 0) + do_fixup_by_path_u32(blob, "/plb/opb/ebc", "clock-frequency", + sys_info.freqEBC, 1); + else + do_fixup_by_path_u32(blob, "/plb/ebc", "clock-frequency", + sys_info.freqEBC, 1); + fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize); /* @@ -86,47 +137,15 @@ void ft_cpu_setup(void *blob, bd_t *bd) */ do_fixup_by_compat_u32(blob, "ns16550", "clock-frequency", gd->uart_clk, 1); -#ifdef USES_FDT_ALIASES /* - * The aliases needed for this generic etherne MAC address - * fixup function are not in place yet. So don't use this - * approach for now. This will be enabled later. + * Fixup all ethernet nodes + * Note: aliases in the dts are required for this */ - fdt_fixup_ethernet(blob, bd); -#else - offset = -1; - for (i = 0; i < 4; i++) { - /* - * FIXME: This will cause problems with emac3 compatible - * devices, like on 405GP. But hopefully when we deal - * with those devices, the aliases stuff will be in - * place. - */ - offset = fdt_node_offset_by_compatible(blob, offset, "ibm,emac4"); - if (offset < 0) - break; - - switch (i) { - case 0: - do_fixup_macaddr(blob, offset, bd->bi_enetaddr, 0); - break; -#ifdef CONFIG_HAS_ETH1 - case 1: - do_fixup_macaddr(blob, offset, bd->bi_enet1addr, 1); - break; -#endif -#ifdef CONFIG_HAS_ETH2 - case 2: - do_fixup_macaddr(blob, offset, bd->bi_enet2addr, 2); - break; -#endif -#ifdef CONFIG_HAS_ETH3 - case 3: - do_fixup_macaddr(blob, offset, bd->bi_enet3addr, 3); - break; -#endif - } - } -#endif /* USES_FDT_ALIASES */ + fdt_fixup_ethernet(blob); + + /* + * Fixup all available PCIe nodes by setting the device_type property + */ + fdt_pcie_setup(blob); } -#endif /* CONFIG_OF_LIBFDT */ +#endif /* CONFIG_OF_LIBFDT && CONFIG_OF_BOARD_SETUP */