X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=cpu%2Fmpc85xx%2Fpci.c;h=fedf1a54df69cbb6b77df5cd17105fac0d62c343;hb=ea393eb1d6a786fc2e895f90abb5f7e7541aef45;hp=60c1e611a7b1de338ae0740fd0496dbe68818739;hpb=9aea95307fdb0ffe0d3a98a17ac73e5040c9756a;p=oweals%2Fu-boot.git diff --git a/cpu/mpc85xx/pci.c b/cpu/mpc85xx/pci.c index 60c1e611a7..fedf1a54df 100644 --- a/cpu/mpc85xx/pci.c +++ b/cpu/mpc85xx/pci.c @@ -29,69 +29,202 @@ #include #include +#if defined(CONFIG_PCI) && !defined(CONFIG_FSL_PCI_INIT) -#if defined(CONFIG_PCI) +#ifndef CONFIG_SYS_PCI1_MEM_BUS +#define CONFIG_SYS_PCI1_MEM_BUS CONFIG_SYS_PCI1_MEM_BASE +#endif + +#ifndef CONFIG_SYS_PCI1_IO_BUS +#define CONFIG_SYS_PCI1_IO_BUS CONFIG_SYS_PCI1_IO_BASE +#endif + +#ifndef CONFIG_SYS_PCI2_MEM_BUS +#define CONFIG_SYS_PCI2_MEM_BUS CONFIG_SYS_PCI2_MEM_BASE +#endif + +#ifndef CONFIG_SYS_PCI2_IO_BUS +#define CONFIG_SYS_PCI2_IO_BUS CONFIG_SYS_PCI2_IO_BASE +#endif + +static struct pci_controller *pci_hose; void -pci_mpc85xx_init(struct pci_controller *hose) +pci_mpc85xx_init(struct pci_controller *board_hose) { - volatile immap_t *immap = (immap_t *)CFG_CCSRBAR; - volatile ccsr_pcix_t *pcix = &immap->im_pcix; - u16 reg16; + u32 dev; + + volatile ccsr_pcix_t *pcix = (void *)(CONFIG_SYS_MPC85xx_PCIX_ADDR); +#ifdef CONFIG_MPC85XX_PCI2 + volatile ccsr_pcix_t *pcix2 = (void *)(CONFIG_SYS_MPC85xx_PCIX2_ADDR); +#endif + volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + struct pci_controller * hose; + + pci_hose = board_hose; + + hose = &pci_hose[0]; hose->first_busno = 0; hose->last_busno = 0xff; + pci_setup_indirect(hose, + (CONFIG_SYS_IMMR+0x8000), + (CONFIG_SYS_IMMR+0x8004)); + + /* + * Hose scan. + */ + dev = PCI_BDF(hose->first_busno, 0, 0); + pci_hose_read_config_word (hose, dev, PCI_COMMAND, ®16); + reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16); + + /* + * Clear non-reserved bits in status register. + */ + pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff); + + if (!(gur->pordevsr & MPC85xx_PORDEVSR_PCI1)) { + /* PCI-X init */ + if (CONFIG_SYS_CLK_FREQ < 66000000) + printf("PCI-X will only work at 66 MHz\n"); + + reg16 = PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ + | PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E; + pci_hose_write_config_word(hose, dev, PCIX_COMMAND, reg16); + } + + pcix->potar1 = (CONFIG_SYS_PCI1_MEM_BUS >> 12) & 0x000fffff; + pcix->potear1 = 0x00000000; + pcix->powbar1 = (CONFIG_SYS_PCI1_MEM_PHYS >> 12) & 0x000fffff; + pcix->powbear1 = 0x00000000; + pcix->powar1 = (POWAR_EN | POWAR_MEM_READ | + POWAR_MEM_WRITE | (__ilog2(CONFIG_SYS_PCI1_MEM_SIZE) - 1)); + + pcix->potar2 = (CONFIG_SYS_PCI1_IO_BUS >> 12) & 0x000fffff; + pcix->potear2 = 0x00000000; + pcix->powbar2 = (CONFIG_SYS_PCI1_IO_PHYS >> 12) & 0x000fffff; + pcix->powbear2 = 0x00000000; + pcix->powar2 = (POWAR_EN | POWAR_IO_READ | + POWAR_IO_WRITE | (__ilog2(CONFIG_SYS_PCI1_IO_SIZE) - 1)); + + pcix->pitar1 = 0x00000000; + pcix->piwbar1 = 0x00000000; + pcix->piwar1 = (PIWAR_EN | PIWAR_PF | PIWAR_LOCAL | + PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP | PIWAR_MEM_2G); + + pcix->powar3 = 0; + pcix->powar4 = 0; + pcix->piwar2 = 0; + pcix->piwar3 = 0; + pci_set_region(hose->regions + 0, - CFG_PCI1_MEM_BASE, - CFG_PCI1_MEM_PHYS, - CFG_PCI1_MEM_SIZE, + CONFIG_SYS_PCI1_MEM_BUS, + CONFIG_SYS_PCI1_MEM_PHYS, + CONFIG_SYS_PCI1_MEM_SIZE, PCI_REGION_MEM); pci_set_region(hose->regions + 1, - CFG_PCI1_IO_BASE, - CFG_PCI1_IO_PHYS, - CFG_PCI1_IO_SIZE, + CONFIG_SYS_PCI1_IO_BUS, + CONFIG_SYS_PCI1_IO_PHYS, + CONFIG_SYS_PCI1_IO_SIZE, PCI_REGION_IO); hose->region_count = 2; + pci_register_hose(hose); + +#if defined(CONFIG_MPC8555CDS) || defined(CONFIG_MPC8541CDS) + /* + * This is a SW workaround for an apparent HW problem + * in the PCI controller on the MPC85555/41 CDS boards. + * The first config cycle must be to a valid, known + * device on the PCI bus in order to trick the PCI + * controller state machine into a known valid state. + * Without this, the first config cycle has the chance + * of hanging the controller permanently, just leaving + * it in a semi-working state, or leaving it working. + * + * Pick on the Tundra, Device 17, to get it right. + */ + { + u8 header_type; + + pci_hose_read_config_byte(hose, + PCI_BDF(0,BRIDGE_ID,0), + PCI_HEADER_TYPE, + &header_type); + } +#endif + + hose->last_busno = pci_hose_scan(hose); + +#ifdef CONFIG_MPC85XX_PCI2 + hose = &pci_hose[1]; + + hose->first_busno = pci_hose[0].last_busno + 1; + hose->last_busno = 0xff; + pci_setup_indirect(hose, - (CFG_IMMR+0x8000), - (CFG_IMMR+0x8004)); + (CONFIG_SYS_IMMR+0x9000), + (CONFIG_SYS_IMMR+0x9004)); - pci_read_config_word (PCI_BDF(0,0,0), PCI_COMMAND, ®16); + dev = PCI_BDF(hose->first_busno, 0, 0); + pci_hose_read_config_word (hose, dev, PCI_COMMAND, ®16); reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; - pci_write_config_word(PCI_BDF(0,0,0), PCI_COMMAND, reg16); + pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16); /* * Clear non-reserved bits in status register. */ - pci_write_config_word(PCI_BDF(0,0,0), PCI_STATUS, 0xffff); - pci_write_config_byte(PCI_BDF(0,0,0), PCI_LATENCY_TIMER,0x80); + pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff); + + pcix2->potar1 = (CONFIG_SYS_PCI2_MEM_BUS >> 12) & 0x000fffff; + pcix2->potear1 = 0x00000000; + pcix2->powbar1 = (CONFIG_SYS_PCI2_MEM_PHYS >> 12) & 0x000fffff; + pcix2->powbear1 = 0x00000000; + pcix2->powar1 = (POWAR_EN | POWAR_MEM_READ | + POWAR_MEM_WRITE | (__ilog2(CONFIG_SYS_PCI2_MEM_SIZE) - 1)); + + pcix2->potar2 = (CONFIG_SYS_PCI2_IO_BUS >> 12) & 0x000fffff; + pcix2->potear2 = 0x00000000; + pcix2->powbar2 = (CONFIG_SYS_PCI2_IO_PHYS >> 12) & 0x000fffff; + pcix2->powbear2 = 0x00000000; + pcix2->powar2 = (POWAR_EN | POWAR_IO_READ | + POWAR_IO_WRITE | (__ilog2(CONFIG_SYS_PCI2_IO_SIZE) - 1)); + + pcix2->pitar1 = 0x00000000; + pcix2->piwbar1 = 0x00000000; + pcix2->piwar1 = (PIWAR_EN | PIWAR_PF | PIWAR_LOCAL | + PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP | PIWAR_MEM_2G); + + pcix2->powar3 = 0; + pcix2->powar4 = 0; + pcix2->piwar2 = 0; + pcix2->piwar3 = 0; - pcix->potar1 = (CFG_PCI1_MEM_BASE >> 12) & 0x000fffff; - pcix->potear1 = 0x00000000; - pcix->powbar1 = (CFG_PCI1_MEM_BASE >> 12) & 0x000fffff; - pcix->powbear1 = 0x00000000; - pcix->powar1 = 0x8004401c; /* 512M MEM space */ + pci_set_region(hose->regions + 0, + CONFIG_SYS_PCI2_MEM_BUS, + CONFIG_SYS_PCI2_MEM_PHYS, + CONFIG_SYS_PCI2_MEM_SIZE, + PCI_REGION_MEM); - pcix->potar2 = (CFG_PCI1_IO_BASE >> 12) & 0x000fffff; - pcix->potear2 = 0x00000000; - pcix->powbar2 = (CFG_PCI1_IO_BASE >> 12) & 0x000fffff; - pcix->powbear2 = 0x00000000; - pcix->powar2 = 0x80088017; /* 16M IO space */ + pci_set_region(hose->regions + 1, + CONFIG_SYS_PCI2_IO_BUS, + CONFIG_SYS_PCI2_IO_PHYS, + CONFIG_SYS_PCI2_IO_SIZE, + PCI_REGION_IO); - pcix->pitar1 = 0x00000000; - pcix->piwbar1 = 0x00000000; - pcix->piwar1 = 0xa0F5501f; + hose->region_count = 2; /* * Hose scan. */ pci_register_hose(hose); + hose->last_busno = pci_hose_scan(hose); +#endif } - #endif /* CONFIG_PCI */