X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=cpu%2Fmpc5xxx%2Ffec.c;h=82640ab77183ea00413f203f9813bf642c254835;hb=53677ef18e25c97ac613349087c5cb33ae5a2741;hp=19737ce868dd32a84b266ce04416fdd86ced1674;hpb=71b405df4e8efc0d6ac3b308d15e74eaa029eb5c;p=oweals%2Fu-boot.git

diff --git a/cpu/mpc5xxx/fec.c b/cpu/mpc5xxx/fec.c
index 19737ce868..82640ab771 100644
--- a/cpu/mpc5xxx/fec.c
+++ b/cpu/mpc5xxx/fec.c
@@ -18,10 +18,10 @@ DECLARE_GLOBAL_DATA_PTR;
 
 /* #define DEBUG	0x28 */
 
-#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI) && \
+#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) && \
 	defined(CONFIG_MPC5xxx_FEC)
 
-#if !(defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII))
+#if !(defined(CONFIG_MII) || defined(CONFIG_CMD_MII))
 #error "CONFIG_MII has to be defined!"
 #endif
 
@@ -288,13 +288,13 @@ static int mpc5xxx_fec_init(struct eth_device *dev, bd_t * bis)
 		 * Set MII_SPEED = (1/(mii_speed * 2)) * System Clock
 		 * and do not drop the Preamble.
 		 */
-		fec->eth->mii_speed = (((gd->ipb_clk >> 20) / 5) << 1);	/* No MII for 7-wire mode */
+		fec->eth->mii_speed = (((gd->ipb_clk >> 20) / 5) << 1); /* No MII for 7-wire mode */
 	}
 
 	/*
 	 * Set Opcode/Pause Duration Register
 	 */
-	fec->eth->op_pause = 0x00010020;	/*FIXME0xffff0020; */
+	fec->eth->op_pause = 0x00010020;	/*FIXME 0xffff0020; */
 
 	/*
 	 * Set Rx FIFO alarm and granularity value
@@ -376,7 +376,7 @@ static int mpc5xxx_fec_init(struct eth_device *dev, bd_t * bis)
 
 #if (DEBUG & 0x2)
 	if (fec->xcv_type != SEVENWIRE)
-		mpc5xxx_fec_phydump ();
+		mpc5xxx_fec_phydump (dev->name);
 #endif
 
 	/*
@@ -428,6 +428,13 @@ static int mpc5xxx_fec_init_phy(struct eth_device *dev, bd_t * bis)
 	 */
 	fec->eth->imask = 0x00000000;
 
+/*
+ * In original Promess-provided code PHY initialization is disabled with the
+ * following comment: "Phy initialization is DISABLED for now.  There was a
+ * problem with running 100 Mbps on PRO board". Thus we temporarily disable
+ * PHY initialization for the Motion-PRO board, until a proper fix is found.
+ */
+
 	if (fec->xcv_type != SEVENWIRE) {
 		/*
 		 * Set MII_SPEED = (1/(mii_speed * 2)) * System Clock
@@ -467,6 +474,10 @@ static int mpc5xxx_fec_init_phy(struct eth_device *dev, bd_t * bis)
 		miiphy_write(dev->name, phyAddr, 0x0, 0x8000);
 		udelay(1000);
 
+#if defined(CONFIG_UC101)
+		/* Set the LED configuration Register for the UC101 Board */
+		miiphy_write(dev->name, phyAddr, 0x14, 0x4122);
+#endif
 		if (fec->xcv_type == MII10) {
 			/*
 			 * Force 10Base-T, FDX operation
@@ -575,7 +586,7 @@ static void mpc5xxx_fec_halt(struct eth_device *dev)
 
 #if (DEBUG & 0x2)
 	if (fec->xcv_type != SEVENWIRE)
-		mpc5xxx_fec_phydump ();
+		mpc5xxx_fec_phydump (dev->name);
 #endif
 
 	/*
@@ -873,16 +884,26 @@ int mpc5xxx_fec_initialize(bd_t * bis)
 
 	fec = (mpc5xxx_fec_priv *)malloc(sizeof(*fec));
 	dev = (struct eth_device *)malloc(sizeof(*dev));
-   	memset(dev, 0, sizeof *dev);
+	memset(dev, 0, sizeof *dev);
 
 	fec->eth = (ethernet_regs *)MPC5XXX_FEC;
 	fec->tbdBase = (FEC_TBD *)FEC_BD_BASE;
 	fec->rbdBase = (FEC_RBD *)(FEC_BD_BASE + FEC_TBD_NUM * sizeof(FEC_TBD));
-#if defined(CONFIG_CANMB)   || defined(CONFIG_HMI1001)	|| \
-    defined(CONFIG_ICECUBE) || defined(CONFIG_INKA4X0)	|| \
-    defined(CONFIG_MCC200)  || defined(CONFIG_O2DNT)	|| \
-    defined(CONFIG_PM520)   || defined(CONFIG_TOP5200)	|| \
-    defined(CONFIG_TQM5200)
+#if defined(CONFIG_CANMB)		|| \
+	defined(CONFIG_CM5200)		|| \
+	defined(CONFIG_HMI1001)		|| \
+	defined(CONFIG_ICECUBE)		|| \
+	defined(CONFIG_INKA4X0)		|| \
+	defined(CONFIG_JUPITER)		|| \
+	defined(CONFIG_MCC200)		|| \
+	defined(CONFIG_MOTIONPRO)	|| \
+	defined(CONFIG_O2DNT)		|| \
+	defined(CONFIG_PM520)		|| \
+	defined(CONFIG_TOP5200)		|| \
+	defined(CONFIG_TQM5200)		|| \
+	defined(CONFIG_UC101)		|| \
+	defined(CONFIG_V38B)		|| \
+	defined(CONFIG_MUNICES)
 # ifndef CONFIG_FEC_10MBIT
 	fec->xcv_type = MII100;
 # else
@@ -904,7 +925,7 @@ int mpc5xxx_fec_initialize(bd_t * bis)
 	sprintf(dev->name, "FEC ETHERNET");
 	eth_register(dev);
 
-#if defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII)
+#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
 	miiphy_register (dev->name,
 			fec5xxx_miiphy_read, fec5xxx_miiphy_write);
 #endif