X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=cpu%2Fblackfin%2Finitcode.c;h=a039cbbbce12d4969b5d9a3f9b2b2452da37f721;hb=f15f14e52879711be1d1bba2634dec684eda722e;hp=3120447c517e2feb51fcdfc3288b1db4a1f70e1e;hpb=ad9073211ca9e62162a39851e082b8d07a662fb6;p=oweals%2Fu-boot.git

diff --git a/cpu/blackfin/initcode.c b/cpu/blackfin/initcode.c
index 3120447c51..a039cbbbce 100644
--- a/cpu/blackfin/initcode.c
+++ b/cpu/blackfin/initcode.c
@@ -92,7 +92,7 @@ static inline void serial_putc(char c)
 		return;
 
 	if (c == '\n')
-		*pUART_THR = '\r';
+		serial_putc('\r');
 
 	*pUART_THR = c;
 
@@ -246,6 +246,15 @@ static inline void serial_putc(char c)
 #endif
 #endif
 
+/* Conflicting Column Address Widths Causes SDRAM Errors:
+ * EB2CAW and EB3CAW must be the same
+ */
+#if ANOMALY_05000362
+# if ((CONFIG_EBIU_SDBCTL_VAL & 0x30000000) >> 8) != (CONFIG_EBIU_SDBCTL_VAL & 0x00300000)
+#  error "Anomaly 05000362: EB2CAW and EB3CAW must be the same"
+# endif
+#endif
+
 BOOTROM_CALLED_FUNC_ATTR
 void initcode(ADI_BOOT_DATA *bootstruct)
 {
@@ -335,6 +344,7 @@ void initcode(ADI_BOOT_DATA *bootstruct)
 	if (!ANOMALY_05000386) {
 		serial_putc('F');
 
+		/* Always programming PLL_LOCKCNT avoids Anomaly 05000430 */
 		ADI_SYSCTRL_VALUES memory_settings;
 		uint32_t actions = SYSCTRL_WRITE | SYSCTRL_PLLCTL | SYSCTRL_PLLDIV | SYSCTRL_LOCKCNT;
 		if (CONFIG_HAS_VR) {
@@ -355,6 +365,10 @@ void initcode(ADI_BOOT_DATA *bootstruct)
 		bfrom_SysControl(actions, &memory_settings, NULL);
 #if ANOMALY_05000432
 		bfin_write_SIC_IWR1(-1);
+#endif
+#if ANOMALY_05000171
+		bfin_write_SICA_IWR0(-1);
+		bfin_write_SICA_IWR1(-1);
 #endif
 	} else {
 		serial_putc('G');
@@ -375,6 +389,7 @@ void initcode(ADI_BOOT_DATA *bootstruct)
 
 		serial_putc('H');
 
+		/* Always programming PLL_LOCKCNT avoids Anomaly 05000430 */
 		bfin_write_PLL_LOCKCNT(CONFIG_PLL_LOCKCNT_VAL);
 
 		serial_putc('I');
@@ -397,7 +412,7 @@ void initcode(ADI_BOOT_DATA *bootstruct)
 		/* Only reprogram when needed to avoid triggering unnecessary
 		 * PLL relock sequences.
 		 */
-		if (bfin_read_PLL_CTL() != CONFIG_PLL_CTL_VAL) {
+		if (ANOMALY_05000242 || bfin_read_PLL_CTL() != CONFIG_PLL_CTL_VAL) {
 			serial_putc('!');
 			bfin_write_PLL_CTL(CONFIG_PLL_CTL_VAL);
 			asm("idle;");
@@ -528,9 +543,11 @@ void initcode(ADI_BOOT_DATA *bootstruct)
 
 	serial_putc('T');
 
+#ifdef CONFIG_BFIN_BOOTROM_USES_EVT1
 	/* tell the bootrom where our entry point is */
 	if (CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_BYPASS)
 		bfin_write_EVT1(CONFIG_SYS_MONITOR_BASE);
+#endif
 
 	serial_putc('>');
 	serial_putc('\n');