X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=configs%2Fsama5d4_xplained_nandflash_defconfig;h=a277be13a4755b4209010ea0322e81f342bfafdd;hb=ab80137cc436e977ef91a154372ae5aeae3f4fb0;hp=ad5d935549123df54982e3cfaa589b70e8243571;hpb=cbe7706ab8aab06c18edaa9b120371f9c8012728;p=oweals%2Fu-boot.git

diff --git a/configs/sama5d4_xplained_nandflash_defconfig b/configs/sama5d4_xplained_nandflash_defconfig
index ad5d935549..a277be13a4 100644
--- a/configs/sama5d4_xplained_nandflash_defconfig
+++ b/configs/sama5d4_xplained_nandflash_defconfig
@@ -1,32 +1,96 @@
 CONFIG_ARM=y
+CONFIG_ARCH_CPU_INIT=y
 CONFIG_ARCH_AT91=y
+CONFIG_SYS_TEXT_BASE=0x26f00000
 CONFIG_TARGET_SAMA5D4_XPLAINED=y
 CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_DM_GPIO=y
 CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_SPL=y
+CONFIG_DEBUG_UART_BOARD_INIT=y
+CONFIG_DEBUG_UART_BASE=0xfc00c000
+CONFIG_DEBUG_UART_CLOCK=100000000
+CONFIG_ENV_OFFSET_REDUND=0x100000
+CONFIG_SPL_TEXT_BASE=0x200000
+CONFIG_DEBUG_UART=y
+CONFIG_ENV_VARS_UBOOT_CONFIG=y
 CONFIG_FIT=y
-CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_NANDFLASH"
+CONFIG_NAND_BOOT=y
 CONFIG_BOOTDELAY=3
-CONFIG_SPL=y
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,768k(uboot)ro,256K(env_redundant),256k(env),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=6 root=ubi0:rootfs"
+CONFIG_MISC_INIT_R=y
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y
-# CONFIG_CMD_IMI is not set
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_LOADS is not set
 # CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_LOADS is not set
 CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
+CONFIG_CMD_NAND=y
 CONFIG_CMD_USB=y
-# CONFIG_CMD_FPGA is not set
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_FAT=y
-CONFIG_SPI_FLASH=y
+CONFIG_OF_CONTROL=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d4_xplained"
+CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-parent dma-names dmas"
+CONFIG_ENV_IS_IN_NAND=y
+CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_DM=y
+CONFIG_SPL_DM=y
+CONFIG_CLK=y
+CONFIG_SPL_CLK=y
+CONFIG_CLK_AT91=y
+CONFIG_AT91_UTMI=y
+CONFIG_AT91_H32MX=y
+CONFIG_AT91_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_AT91=y
+CONFIG_I2C_EEPROM=y
+CONFIG_DM_MMC=y
+CONFIG_GENERIC_ATMEL_MCI=y
+CONFIG_MTD=y
+# CONFIG_SYS_NAND_USE_FLASH_BBT is not set
+CONFIG_NAND_ATMEL=y
+CONFIG_PMECC_CAP=8
+CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SF_DEFAULT_SPEED=30000000
 CONFIG_SPI_FLASH_ATMEL=y
+CONFIG_DM_ETH=y
+CONFIG_MACB=y
+CONFIG_PINCTRL=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_PINCTRL_AT91=y
+CONFIG_DM_SERIAL=y
+CONFIG_DEBUG_UART_ATMEL=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
+CONFIG_ATMEL_USART=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_TIMER=y
+CONFIG_SPL_TIMER=y
+CONFIG_ATMEL_PIT_TIMER=y
 CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_ATMEL_USBA=y
-CONFIG_OF_LIBFDT=y
+CONFIG_DM_VIDEO=y
+# CONFIG_VIDEO_BPP8 is not set
+# CONFIG_VIDEO_BPP32 is not set
+CONFIG_ATMEL_HLCD=y
+CONFIG_W1=y
+CONFIG_W1_GPIO=y
+CONFIG_W1_EEPROM=y
+CONFIG_W1_EEPROM_DS24XXX=y
+CONFIG_OF_LIBFDT_OVERLAY=y