X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=configs%2Fsama5d3xek_mmc_defconfig;h=934d020471c377c9cebaeb28362a0467250ceae8;hb=8060209a9278593519f73ba763e67f7aa219a732;hp=827c26ae10bb5f86d0f05d7488cf8c4fc6ea9216;hpb=abeb9d7897510533ce3a0a9515cac16db5bed834;p=oweals%2Fu-boot.git

diff --git a/configs/sama5d3xek_mmc_defconfig b/configs/sama5d3xek_mmc_defconfig
index 827c26ae10..934d020471 100644
--- a/configs/sama5d3xek_mmc_defconfig
+++ b/configs/sama5d3xek_mmc_defconfig
@@ -1,4 +1,5 @@
 CONFIG_ARM=y
+CONFIG_ARCH_CPU_INIT=y
 CONFIG_ARCH_AT91=y
 CONFIG_SYS_TEXT_BASE=0x26f00000
 CONFIG_TARGET_SAMA5D3XEK=y
@@ -9,11 +10,16 @@ CONFIG_SYS_MALLOC_F_LEN=0x2000
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_SPL_LIBDISK_SUPPORT=y
+CONFIG_ENV_SIZE=0x4000
+CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
-CONFIG_SPL_FAT_SUPPORT=y
-CONFIG_DEFAULT_DEVICE_TREE="sama5d36ek"
+CONFIG_DEBUG_UART_BOARD_INIT=y
+CONFIG_DEBUG_UART_BASE=0xffffee00
+CONFIG_DEBUG_UART_CLOCK=132000000
+CONFIG_SPL_FS_FAT=y
+CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_DEBUG_UART=y
+CONFIG_SPL_TEXT_BASE=0x300000
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
 CONFIG_FIT=y
 CONFIG_SD_BOOT=y
@@ -42,6 +48,7 @@ CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_FAT=y
 CONFIG_OF_CONTROL=y
 CONFIG_SPL_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="sama5d36ek"
 CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-parent dmas dma-names"
 CONFIG_ENV_IS_IN_FAT=y
 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
@@ -58,8 +65,15 @@ CONFIG_AT91_GPIO=y
 CONFIG_DM_MMC=y
 CONFIG_GENERIC_ATMEL_MCI=y
 CONFIG_MTD_NOR_FLASH=y
+CONFIG_FLASH_CFI_DRIVER=y
+CONFIG_SYS_FLASH_PROTECTION=y
+CONFIG_SYS_FLASH_CFI=y
+CONFIG_NAND=y
+# CONFIG_SYS_NAND_USE_FLASH_BBT is not set
+CONFIG_NAND_ATMEL=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH=y
+CONFIG_SF_DEFAULT_SPEED=30000000
 CONFIG_SPI_FLASH_ATMEL=y
 CONFIG_DM_ETH=y
 CONFIG_MACB=y
@@ -68,9 +82,6 @@ CONFIG_SPL_PINCTRL=y
 CONFIG_PINCTRL_AT91=y
 CONFIG_DM_SERIAL=y
 CONFIG_DEBUG_UART_ATMEL=y
-CONFIG_DEBUG_UART_BASE=0xffffee00
-CONFIG_DEBUG_UART_CLOCK=132000000
-CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ATMEL_USART=y
 CONFIG_SPI=y