X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=configs%2Fpm9261_defconfig;h=d2c4c25672782630d545841a4c7c2fc11cffb83f;hb=e4f01b513354afb09efa9bb7fbb737d71a02f1fe;hp=a2cbb4c4e0974060790807e0336c9a85b0ede2e7;hpb=c53a825e15ca74902e9d5f68d839011dc11e055f;p=oweals%2Fu-boot.git

diff --git a/configs/pm9261_defconfig b/configs/pm9261_defconfig
index a2cbb4c4e0..d2c4c25672 100644
--- a/configs/pm9261_defconfig
+++ b/configs/pm9261_defconfig
@@ -1,29 +1,34 @@
 CONFIG_ARM=y
 CONFIG_ARCH_AT91=y
+CONFIG_SYS_TEXT_BASE=0
 CONFIG_TARGET_PM9261=y
 CONFIG_SYS_MALLOC_F_LEN=0x2000
-CONFIG_DEFAULT_DEVICE_TREE="at91sam9261ek"
+CONFIG_NR_DRAM_BANKS=1
 CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9261"
-CONFIG_ENV_IS_IN_FLASH=y
 CONFIG_BOOTDELAY=3
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="root=/dev/mtdblock4 rootfstype=jffs2 fbcon=rotate:3 "
 # CONFIG_CONSOLE_MUX is not set
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_BOARD_EARLY_INIT_F=y
+# CONFIG_AUTO_COMPLETE is not set
 CONFIG_SYS_PROMPT="pm9261> "
 # CONFIG_CMD_BDI is not set
 # CONFIG_CMD_IMI is not set
-# CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_LOADS is not set
 CONFIG_CMD_NAND=y
 CONFIG_CMD_SF=y
 CONFIG_CMD_USB=y
-# CONFIG_CMD_FPGA is not set
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_CACHE=y
+CONFIG_MTDIDS_DEFAULT="nor0=physmap-flash.0,nand0=nand"
+CONFIG_MTDPARTS_DEFAULT="mtdparts=physmap-flash.0:256k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),-(rootfs);nand:-(nand)"
 CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="at91sam9261ek"
+CONFIG_ENV_IS_IN_FLASH=y
 CONFIG_DM=y
 CONFIG_CLK=y
 CONFIG_CLK_AT91=y
@@ -31,6 +36,10 @@ CONFIG_DM_GPIO=y
 CONFIG_AT91_GPIO=y
 # CONFIG_MMC is not set
 CONFIG_MTD_NOR_FLASH=y
+CONFIG_FLASH_CFI_DRIVER=y
+CONFIG_SYS_FLASH_CFI=y
+CONFIG_NAND=y
+CONFIG_NAND_ATMEL=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_ATMEL=y
@@ -39,8 +48,8 @@ CONFIG_PINCTRL=y
 CONFIG_PINCTRL_AT91=y
 CONFIG_DM_SERIAL=y
 CONFIG_ATMEL_USART=y
+CONFIG_SPI=y
 CONFIG_DM_SPI=y
-CONFIG_ATMEL_SPI=y
 CONFIG_USB=y
 CONFIG_USB_STORAGE=y
 CONFIG_LCD=y