X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=configs%2Fpfla02_defconfig;h=7bd146d1ba7764d42e998993aeb5f82385e2fb25;hb=9243990b17558c6498208061842b2ff4056acde0;hp=eacd6b45b88cae85e79439544db5bc18fc29534d;hpb=ebca902aeb3af3eaedd2787928184ad84a86b98f;p=oweals%2Fu-boot.git

diff --git a/configs/pfla02_defconfig b/configs/pfla02_defconfig
index eacd6b45b8..7bd146d1ba 100644
--- a/configs/pfla02_defconfig
+++ b/configs/pfla02_defconfig
@@ -7,23 +7,27 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_TARGET_PFLA02=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_SPL=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI_SUPPORT=y
-CONFIG_SPL_WATCHDOG_SUPPORT=y
-CONFIG_SPL=y
 CONFIG_CMD_HDMIDETECT=y
+CONFIG_SPL_TEXT_BASE=0x00908000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_FIT=y
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
 CONFIG_BOOTDELAY=3
 # CONFIG_USE_BOOTCOMMAND is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_BOUNCE_BUFFER=y
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL_DMA_SUPPORT=y
-CONFIG_SPL_EXT_SUPPORT=y
+CONFIG_SPL_FS_EXT4=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_SPI_LOAD=y
+CONFIG_SYS_SPI_U_BOOT_OFFS=0x10000
+CONFIG_SPL_WATCHDOG_SUPPORT=y
 CONFIG_SPL_YMODEM_SUPPORT=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_GPIO=y
@@ -33,22 +37,27 @@ CONFIG_CMD_MMC=y
 CONFIG_CMD_SF=y
 CONFIG_CMD_CACHE=y
 CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_MTDPARTS=y
 CONFIG_MTDIDS_DEFAULT="nand0=gpmi-nand"
 CONFIG_MTDPARTS_DEFAULT="mtdparts=gpmi-nand:-(nand);spi2.0:1024k(bootloader),64k(env1),64k(env2),-(rescue)"
 CONFIG_CMD_UBI=y
 # CONFIG_SPL_PARTITION_UUIDS is not set
 CONFIG_DM=y
-CONFIG_FSL_ESDHC=y
+CONFIG_FSL_USDHC=y
 CONFIG_MTD=y
 CONFIG_NAND=y
 CONFIG_NAND_MXS=y
 CONFIG_SPI_FLASH=y
+CONFIG_SF_DEFAULT_BUS=2
+CONFIG_SF_DEFAULT_MODE=0
+CONFIG_SF_DEFAULT_SPEED=20000000
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_PHYLIB=y
 CONFIG_PHY_MICREL=y
 CONFIG_PHY_MICREL_KSZ90X1=y
-CONFIG_NETDEVICES=y
 CONFIG_FEC_MXC=y
+CONFIG_MII=y
+CONFIG_SPI=y
 CONFIG_MXC_SPI=y
 CONFIG_DM_THERMAL=y
 CONFIG_OF_LIBFDT=y