X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=configs%2Fls2080aqds_nand_defconfig;h=3a3694107dc9c003e3f7a7a208218b1e76554a52;hb=b5b9eff26d28feb7dc59661b78e5844d12fca0c8;hp=86696513dedb1a3db2e8352f4d60495da052809d;hpb=b592936d357f6c648f59ae0e3159149df3a942fb;p=oweals%2Fu-boot.git

diff --git a/configs/ls2080aqds_nand_defconfig b/configs/ls2080aqds_nand_defconfig
index 86696513de..3a3694107d 100644
--- a/configs/ls2080aqds_nand_defconfig
+++ b/configs/ls2080aqds_nand_defconfig
@@ -5,8 +5,9 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_SPL=y
 CONFIG_NR_DRAM_BANKS=3
+CONFIG_SPL=y
+CONFIG_AHCI=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
@@ -16,6 +17,7 @@ CONFIG_BOOTDELAY=10
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256"
 # CONFIG_USE_BOOTCOMMAND is not set
+CONFIG_SPL_TEXT_BASE=0x1800a000
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
@@ -41,9 +43,13 @@ CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2080a-qds"
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DM=y
+CONFIG_SATA_CEVA=y
 CONFIG_FSL_CAAM=y
+CONFIG_DM_MMC=y
 CONFIG_FSL_ESDHC=y
 CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+# CONFIG_SPI_FLASH_BAR is not set
 CONFIG_PHYLIB=y
 CONFIG_PHY_GIGE=y
 CONFIG_E1000=y
@@ -52,6 +58,7 @@ CONFIG_PCI=y
 CONFIG_DM_PCI=y
 CONFIG_DM_PCI_COMPAT=y
 CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_DM_SCSI=y
 CONFIG_SYS_NS16550=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
@@ -60,7 +67,4 @@ CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
-CONFIG_USB_STORAGE=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
-CONFIG_BLK=y
-CONFIG_DM_MMC=y