X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=configs%2Fls1028ardb_tfa_defconfig;h=5ff34047a7509d8c8eb453cf0d0ee204bcb11211;hb=6891152a4596d38ac25d2fe1238e3b6a938554b8;hp=a8e4ddb7a822eeec2820a47be0521db8d6f777c4;hpb=40920bdecc4e1b7096de6f546d7b5c2185554ba6;p=oweals%2Fu-boot.git

diff --git a/configs/ls1028ardb_tfa_defconfig b/configs/ls1028ardb_tfa_defconfig
index a8e4ddb7a8..5ff34047a7 100644
--- a/configs/ls1028ardb_tfa_defconfig
+++ b/configs/ls1028ardb_tfa_defconfig
@@ -1,13 +1,13 @@
 CONFIG_ARM=y
 CONFIG_TARGET_LS1028ARDB=y
-CONFIG_SYS_FSL_SDHC_CLK_DIV=1
 CONFIG_TFABOOT=y
+CONFIG_SYS_MALLOC_F_LEN=0x6000
+CONFIG_SYS_FSL_SDHC_CLK_DIV=1
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
 CONFIG_AHCI=y
 CONFIG_DISTRO_DEFAULTS=y
-# CONFIG_SYS_MALLOC_F is not set
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
@@ -34,7 +34,15 @@ CONFIG_DM=y
 CONFIG_SCSI_AHCI=y
 CONFIG_SATA_CEVA=y
 CONFIG_FSL_CAAM=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_I2C_DEFAULT_BUS_NUMBER=0
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA954x=y
 CONFIG_DM_MMC=y
+CONFIG_MMC_HS200_SUPPORT=y
+CONFIG_FSL_ESDHC=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_SPANSION=y
@@ -42,13 +50,19 @@ CONFIG_SPI_FLASH_STMICRO=y
 # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
 CONFIG_PHYLIB=y
 CONFIG_PHY_ATHEROS=y
+CONFIG_PHY_VITESSE=y
 CONFIG_DM_ETH=y
+CONFIG_DM_MDIO=y
 CONFIG_PHY_GIGE=y
 CONFIG_E1000=y
+CONFIG_FSL_ENETC=y
 CONFIG_PCI=y
 CONFIG_DM_PCI=y
 CONFIG_DM_PCI_COMPAT=y
+CONFIG_PCIE_ECAM_GENERIC=y
 CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_DM_RTC=y
+CONFIG_RTC_PCF2127=y
 CONFIG_SCSI=y
 CONFIG_DM_SCSI=y
 CONFIG_SYS_NS16550=y