X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=configs%2Fge_bx50v3_defconfig;h=68abf46d7afbe43008f497cd2f8c9cdb6e3ac810;hb=e78f16b751c86de8d20222083b1d14fd4e1c0f59;hp=54197f7541cd77837e04493d9930067a04db70a3;hpb=dcf722ece6aad0c1512a26cdefc2f74a192fa9d2;p=oweals%2Fu-boot.git

diff --git a/configs/ge_bx50v3_defconfig b/configs/ge_bx50v3_defconfig
index 54197f7541..68abf46d7a 100644
--- a/configs/ge_bx50v3_defconfig
+++ b/configs/ge_bx50v3_defconfig
@@ -5,8 +5,11 @@ CONFIG_SYS_VPD_EEPROM_I2C_ADDR=0x50
 CONFIG_SYS_VPD_EEPROM_I2C_BUS=4
 CONFIG_SYS_VPD_EEPROM_SIZE=1024
 CONFIG_TARGET_GE_BX50V3=y
+CONFIG_ENV_SIZE=0x2000
+CONFIG_ENV_OFFSET=0xC0000
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_SYS_BOOTCOUNT_ADDR=0x7000A000
+CONFIG_ENV_SECT_SIZE=0x10000
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_FIT=y
 CONFIG_OF_BOARD_SETUP=y
@@ -24,7 +27,6 @@ CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_PCI=y
-CONFIG_CMD_SF=y
 # CONFIG_CMD_NFS is not set
 CONFIG_CMD_CACHE=y
 CONFIG_CMD_EXT2=y
@@ -35,6 +37,7 @@ CONFIG_DOS_PARTITION=y
 CONFIG_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="imx6q-bx50v3"
 CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
 CONFIG_BOOTCOUNT_LIMIT=y
 CONFIG_BOOTCOUNT_EXT=y
@@ -43,9 +46,8 @@ CONFIG_SYS_BOOTCOUNT_EXT_DEVPART="1:5"
 CONFIG_DM_GPIO=y
 CONFIG_DM_MMC=y
 CONFIG_SUPPORT_EMMC_BOOT=y
-CONFIG_FSL_ESDHC_IMX=y
+CONFIG_FSL_USDHC=y
 CONFIG_DM_SPI_FLASH=y
-CONFIG_SPI_FLASH=y
 CONFIG_SF_DEFAULT_MODE=0
 CONFIG_SF_DEFAULT_SPEED=20000000
 CONFIG_SPI_FLASH_STMICRO=y
@@ -61,5 +63,6 @@ CONFIG_DM_SPI=y
 CONFIG_MXC_SPI=y
 CONFIG_DM_VIDEO=y
 CONFIG_VIDEO_IPUV3=y
+CONFIG_WATCHDOG_TIMEOUT_MSECS=6000
 CONFIG_IMX_WATCHDOG=y
 # CONFIG_EFI_LOADER is not set