X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=configs%2Fcorvus_defconfig;h=a1af2f1342f5b590031e016f906946236d128e81;hb=afbdff18f4841b86f4ae294e1356eefa7c1565dd;hp=066dc38535d027db0620a509f567b3e3c7ebf996;hpb=74d90d17eebfeeefd91776e3deb7901c122bef7f;p=oweals%2Fu-boot.git

diff --git a/configs/corvus_defconfig b/configs/corvus_defconfig
index 066dc38535..a1af2f1342 100644
--- a/configs/corvus_defconfig
+++ b/configs/corvus_defconfig
@@ -1,30 +1,30 @@
 CONFIG_ARM=y
+CONFIG_SYS_THUMB_BUILD=y
 # CONFIG_SPL_USE_ARCH_MEMCPY is not set
 # CONFIG_SPL_USE_ARCH_MEMSET is not set
 CONFIG_ARCH_AT91=y
+CONFIG_SYS_TEXT_BASE=0x72000000
 CONFIG_TARGET_CORVUS=y
 CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SYS_MALLOC_F_LEN=0x800
 CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_NAND_SUPPORT=y
-CONFIG_DEFAULT_DEVICE_TREE="at91sam9g45-corvus"
+CONFIG_SPL=y
+CONFIG_NR_DRAM_BANKS=1
 CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9M10G45,MACH_TYPE=2066,SYS_USE_NANDFLASH"
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2"
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_SPL=y
+CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="U-Boot> "
 # CONFIG_CMD_BDI is not set
 CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_IMI is not set
-# CONFIG_CMD_IMLS is not set
 CONFIG_CMD_DFU=y
-# CONFIG_CMD_FPGA is not set
 CONFIG_CMD_GPIO=y
 # CONFIG_CMD_LOADS is not set
 CONFIG_CMD_NAND=y
@@ -36,14 +36,15 @@ CONFIG_CMD_PING=y
 CONFIG_CMD_MTDPARTS=y
 CONFIG_OF_CONTROL=y
 CONFIG_OF_EMBED=y
+CONFIG_DEFAULT_DEVICE_TREE="at91sam9g45-corvus"
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_CLK=y
 CONFIG_CLK_AT91=y
-CONFIG_AT91_UTMI=y
 CONFIG_DFU_NAND=y
 # CONFIG_MMC is not set
+CONFIG_NAND=y
+CONFIG_NAND_ATMEL=y
 CONFIG_PHYLIB=y
-# CONFIG_SPL_DM_SERIAL is not set
 CONFIG_ATMEL_USART=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y